Continental Refrigerator DL1RI-SS-E User Manual

ROLL-IN & ROLL-THRU

REFRIGERATORS

EXTENDED HEIGHT

(72" CART CAPACITY)

REFRIGERATORS

Utilizing Environmentally Safe, CFC-free R-134a Refrigerant

Standard Features

•Modern, State-Of-The-Art Styling

•Performance Rated, "Plug" Refrigeration System
Utilizing Environmentally Safe R-134a Refrigerant

•High Density, Non-CFC Polyurethane Foam
Insulation

•Chrome-Plated Flow Line Handles

•Cam-Action Lift-Off Hinges

•Self-Closing Doors

•Cylinder Lock in Each Door

•Automatic Hot Gas Condensate Evaporator

•27

3

/

8" Wide,72

1

/

2" High Door Opening

•External Digital Thermometer

•Removable Stainless Steel Rack Guides

•Magnetic Snap-In Door Gaskets

•Unique Air Flow Distribution Ducts Keep Pan
Product at Uniformly Constant Temperatures

•Removable Stainless Steel Ramps

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

DDLL11RRII--SSSS--EE

DDLL33RRII--SSSS--EE

DDLL22RRII--SSSS--EE

Models Available

•Roll-Thru •Glass Door

•Remote •Consult Factory

REFRIGERATION SYSTEM

A "performance rated", air-cooled hermetically sealed,
refrigeration system is installed on the top of each
refrigerator. Plasticized fin coil and air circulating fans
are contained within a concealed "plug" type insulated
housing, readily accessible on the top of the cabinet
and separate from the food zone to increase food stor­age capacity. The entire "plug" system is fully charged
with environmentally safe R-134a refrigerant and
mounted on a sturdy steel, rail type base. Refrigerators
are designed to maintain 38 to 40 degrees Fahrenheit
(3-5 degrees Centigrade) while operating with an unre­stricted air supply in a maximum ambient temperature
of 100 degrees Fahrenheit. All condensate water is
evaporated by an automatic, non-electric, corrosion­resistant condensate evaporator. A strict quality-assur­ance team inspects all materials and components to
the most exacting standards. All models are factory
performance-tested for a minimum of 16 hours prior to
crating.

CABINET CONSTRUCTION

All materials are of top quality, and are
assembled under rigid supervision conform­ing to strict quality assurance requirements.
The cabinet front, doors, and interior bottoms
are constructed of heavy gauge polished
stainless steel for durability. All cabinet joints
and seams are sealed vapor tight. Case is of
all metal welded construction and is internally
supported and braced for rigid unit construc­tion. Cabinet design eliminates overlapping
panels with raw edges. Cabinet body and
doors are insulated with non-CFC, foamed in
place polyurethane foam to ensure increased
energy efficiency. Full-length louvered air
grille located above the doors allows equal air
circulation to the condensing unit. Easily
removable, low-wattage, anti-sweat door
heaters concealed by a non-metallic, non­conductive, high-impact thermal breaker strip
eliminate condensate build up on the cabinet
front. Automatic interior lighting is controlled
by door openings. Cabinets are equipped
with an easily removable stainless steel ramp
and interior rack guides.

DOOR CONSTRUCTION

Doors shells are constructed of a heavy
gauge stainless steel and are internally
braced and urethane foam insulated for
rigidity. Door corners are of welded con­struction and polished. Replaceable
snap-in door gaskets are self-adjusting,
heavy-duty, magnetic type. Doors han­dles and hinges are chrome-plated and
non-corrosive. Doors are provided with
built-in cylinder locks, which are keyed
alike. Hinges are cam action, lift-off type
featuring a positive safety stop at 120
degree

REFRIGERATORS

A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
[phone] Fax: [phone]
www.continentalrefrigerator.com

DL1RI-SS-E DL2RI-SS-E DL3RI-SS-E

SPECIFICATIONS ONE SECTION TWO SECTION THREE SECTION

SIDE VIEW

DL2RI-E/RT-E

DL3RI-E/RT-E

DL1RI-E/RT-E

687/8"

273/8"

28"

273/8"

28"

273/8"

1013/

4"

273/8" 273/8"

273/8''

28''

351/

4''

291/4''

323/8''

761/2''

92''

6''

DIMENSIONAL DATA ROLL-IN ROLL-THRU ROLL-IN ROLL-THRU ROLL-IN ROLL-THRU

Net Capacity (cu. ft.) 34 34 68 68 102 102
Width, Overall (in.) 361/4 361/4 681/2 681/2 1013/4 1013/4
Depth, Overall, Incl. Hdls. (in.) 351/2 39 351/2 39 351/2 39
Depth (Less Door(s))(in.) 32 32 32 32 32 32
Depth (Door(s) Open 90°)(in.) 65 98 65 98 65 98
Clear Door Width (in.) 27
Clear Full-Door Height (in.) 721/2 721/2 721/2 721/2 721/2 721/2
Height, Overall (in.) 92 92 92 92 92 92
No. of Full Door(s) 1 2 2 4 3 6
Rack Capacity* 1 1 2 2 3 3

REFRIGERATION DATA

Condensing Unit Size (H.P.)
Capacity (BTU/Hr)** 2980 2980 3900 3900 6300 6300
Refrigerant R-134a R-134a R-134a R-134a R-134a R-134a

ELECTRICAL DATA

Cabinet Specifications
Feed Wires (Incl. Ground) 3 3 4 4 4 4
Condensing Unit Specs.
Total Amperes 11.4 11.6 14.4 15.4 17.3 18.8
Cabinet Amperes 1.9 2.4 3.1 4.1 4.3 5.8
Defrost Amperes - - - - - ­Power Supply Cord yes yes no no no no

SHIPPING DATA

Height-crated (in.) 94 94 94 94 94 94
Width-crated (in.) 43 43 77 77 109 109
Depth-crated (in.) 42 42 42 42 42 42
Volume-crated (cu. ft.) 98 98 176 176 249 249

Weight Std-crated (lbs.) 435 495 700 780 860 980
Weight SS-crated (lbs.) 565 600 740 825 945 1070
Weight Std - uncrated (lbs.) 350 410 560 625 690 780
Weight SS - uncrated (lbs.) 425 500 595 660 760 860

3

/8 273/8 273/8 273/8 273/8 273/8

1

/

2

115/60/1 115/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1

115/60/1 115/60/1 115/60/1 115/60/1 208-230/60/1 208-230/60/1

1

/

2

3

/

4

3

/

4 11

*Maximum Rack Size including wheels - 27"W x 29"D x 72"H
**Rating @ +25° Evaporator, 90° Ambient
Note: All Specifications subject to change without notice

Note: If the cabinet is located directly against a wall and/or under low ceiling, a minimum clearance of 12" is required.

DLRIE810