Continental Refrigerator DL1RI-SS User Manual

DDLL11RRII--SSSS

ROLL-IN & ROLL-THRU

REFRIGERATORS

Utilizing Environmentally Safe, CFC-free R-134a Refrigerant

Standard Features

•Modern, State-Of-The-Art Styling

•Performance Rated, "Plug" Refrigeration System Utilizing Environmentally Safe R-134a Refrigerant

•3" High Density, Non-CFC Polyurethane Foam Insulation

•Chrome-Plated Flow Line Handles

•Cam-Action Lift-Off Hinges

•Self-Closing Doors

•Cylinder Lock in Each Door

•Automatic Hot Gas Condensate Evaporator

•27

8" Wide, 66

2" High Door Opening

•External Digital Thermometer

•Removable Stainless Steel Rack Guides

•Magnetic Snap-In Door Gaskets

•Unique Air Flow Distribution Ducts Keep Pan Product at Uniformly Constant Temperatures

•Removable Stainless Steel Ramps

Models Available

•Roll-Thru •Glass Door

•Remote •Consult Factory

Standard (S/S Front, Aluminum Ends & Interior) Suffix SA (S/S Exterior, Aluminum Interior) Suffix SS (S/S Exterior & Interior)

DDLL33RRII--SSSS

REFRIGERATION SYSTEM

A "performance rated", air-cooled hermetically sealed, capillary type refrigeration system is installed on the top of each refrigerator. Plasticized fin coil and air circulating fans are contained within a concealed "plug" type insulated housing, readily accessible on the top of the cabinet and separate from the food zone to increase food storage capacity. The entire "plug" system is fully charged with environmentally safe R-134a refrigerant and mounted on a sturdy steel, rail type base, which can be easily removed if freezer conversion is desired. Refrigerators are designed to maintain 38 to 40 degrees Fahrenheit (3-5 degrees Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100 degrees Fahrenheit. All condensate water is evaporated by an automatic, nonelectric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and components to the most exacting standards. All models are factory performance-tested for a minimum of 16 hours prior to crating.

CABINET CONSTRUCTION

All materials are of top quality, and are assembled under rigid supervision conforming to strict quality assurance requirements. The cabinet front, doors, and interior bottoms are constructed of heavy gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor tight. Case is of all metal welded construction and is internally supported and braced for rigid unit construction. Cabinet design eliminates overlapping panels with raw edges. Cabinet body and doors are insulated with non-CFC, foamed in place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located above the doors allows equal air circulation to the condensing unit. Easily removable, low-wattage, anti-sweat door heaters concealed by a non-metallic, nonconductive, high-impact thermal breaker strip eliminate condensate build up on the cabinet front. Automatic interior lighting is controlled by door openings. Cabinets are equipped with an easily removable stainless steel ramp and interior rack guides.

DOOR CONSTRUCTION

Doors shells are constructed of a heavy gauge stainless steel and are internally braced and urethane foam insulated for rigidity. Door corners are of welded construction and polished. Replaceable snap-in door gaskets are self-adjusting, heavy-duty, magnetic type. Doors handles and hinges are chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks, which are keyed alike. Hinges are cam action, lift-off type featuring a positive safety stop at 120 degree

DDLL22RRII--SSSS

REFRIGERATORS

A Division of National Refrigeration & A/C Products, Inc. 539 Dunksferry Road Bensalem, PA 19020 (800) 523-7138 Fax: (215) 244-9579 www.continentalrefrigerator.com

DL1RI-SS DL2RI-SS DL3RI-SS

SPECIFICATIONS ONE SECTION TWO SECTION THREE SECTION

SIDE VIEW

DL2RI

DL3RI

DL1RI

DIMENSIONAL DATA ROLL-IN ROLL-THRU ROLL-IN ROLL-THRU ROLL-IN ROLL-THRU

Net Capacity (cu. ft.) 32 32 64 64 96 96 Width, Overall (in.) 35 Depth, Overall, Incl. Hdls. (in.) 351/2 39 351/2 39 351/2 39 Depth (Less Door(s))(in.) 32 32 32 32 32 32 Depth (Door(s) Open 90°)(in.) 65 98 65 98 65 98 Clear Door Width (in.) 27 Clear Full-Door Height (in.) 661/ Height, Overall (in.) 86 86 86 86 86 86 No. of Full Door(s) 1 2 2 4 3 6 Rack Capacity* 1 1 2 2 3 3

REFRIGERATION DATA

Condensing Unit Size (H.P.) Capacity (BTU/Hr)** 2560 2560 4010 4010 5930 5930 Refrigerant R-134a R-134a R-134a R-134a R-134a R-134a

ELECTRICAL DATA

Cabinet Specifications 115/60/1 115/60/1 115/60/1 115/60/1 115/208-230/60/1 115/208-230/60/1 Feed Wires (Incl. Ground) 3 3 3 3 4 4 Condensing Unit Specs. 115/60/1 115/60/1 115/60/1 115/60/1 208-230/60/1 208-230/60/1 Total Amperes 9.1 9.6 14.7 15.7 11.3 12.8 Cabinet Amperes 1.9 2.4 3.1 4.1 4.3 5.8 Defrost Amperes - - - - - Power Supply Cord yes yes yes yes no no

SHIPPING DATA

Height-crated (in.) 90 90 90 90 90 90 Width-crated (in.) 43 43 77 77 109 109 Depth-crated (in.) 42 42 42 42 42 42 Volume-crated (cu. ft.) 94 94 168 168 238 238 Weight Std-crated (lbs.) 415 475 680 780 840 960 Weight SS-crated (lbs.) 505 580 720 825 925 1050 Weight Std - uncrated (lbs.) 330 380 540 625 670 760 Weight SS - uncrated (lbs.) 405 460 575 660 740 840

/4 351/4 681/2 681/2 1013/4 1013/4

/8 273/8 273/8 273/8 273/8 273/8

2 66

*Maximum Rack Size including wheels - 27"W x 29"D x 66

4"H

**Rating @ +25° Evaporator, 90° Ambient Note: All Specifications subject to change without notice

Note: If the cabinet is located directly against a wall and/or under low ceiling, a minimum clearance of 12" is required.

DLRI810