EXTRA-WIDE DISPLAY
REFRIGERATORS
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Standard Features
• Modern, State-of-the-Art Styling Performance rated
“Plug” Refrigeration System Utilizing Environmentally
Safe R-134a Refrigerant
• 3" Non-CFC Polyurethane Foam Insulation
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Magnetic Snap-In Door Gaskets
• Cabinet Upper Side Panels and Refrigeration “Plug”
System can be Easily Removed and Reinstalled at
Job-Site Where Space Limitations are Confining
• Cylinder Lock in Each Door
• Automatic Hot Gas Condensate Evaporator
• Refrigeration System is Readily Accessible on Top
of the Cabinet and Separate from the Food Zone
to Increase Food Storage Capacity
• Adjustable 6" Stainless Steel Legs
• Heavy-Duty, Epoxy-Coated Steel Shelves
• External Digital Thermometer
• Double-pane, Tempered Hinged Glass Doors
• Fluorescent Interior Lighting
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
• Half Door
• Remote
• Pass-Thru
• Consult Factory
Optinonal Features & Accessories
DL1RE-SS-GD
Other Models Available
• DL1RX-SS-GD
DL2RE-SS-GD
DL3RE-SS-GD
Refrigeration System
A “performance rated”, air cooled, hermetically
sealed, capillary-type refrigeration system is installed
on the top of each refrigerator. Plasticized fin coil and
air circulating fans are contained within a concealed
“plug” type insulated housing, readily accessible on
top of the cabinet and separate from the food zone to
increase food storage capacity. The entire “plug” system is fully charged with environmentally safe R-134a
refrigerant and mounted on a sturdy steel, rail-type
base which can be easily removed if freezer conversion is desired. Refrigerators are designed to maintain 38 to 40 degrees Fahrenheit (3 to 5 degrees
Centigrade) while operating with an unrestricted air
supply in a maximum ambient temperature of 100
degrees Fahrenheit . All condensate water is evaporated by an automatic non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify
that each model conforms to the most exacting standards. All models are factory performance tested for a
minimum of 16 hours prior to crating.
Cabinet Construction
All materials are of top quality, assembled to conform
with strict quality-assurance requirements. The cabinet front is constructed of heavy-gauge polished
stainless steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all metal,
welded construction and internally supported and
braced for a rigid unit construction. Cabinet design
eliminates overlapping panels with raw edges.
Cabinet body is insulated with non-CFC, foamed-inplace polyurethane foam with an average thickness of
3 inches to ensure increased energy efficiency. Full
length louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low wattage, anti-sweat door
heaters concealed by a non-metallic, non-conductive,
high-impact thermal breaker strip eliminate condensate build-up on the cabinet front. Fluorescent lighting
is activated by an easily accessible interior switch.
Cabinets are equipped with 6-inch adjustable stainless steel legs.
Shelving
Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140" diameter fill wires spaced
3
/4" apart. Shelves are welded
steel and epoxy-coated for a durable, long, rust-free
service life. Adjustments are in 1/2 inch increments
and a wide door opening allows the use of a variety of
optional pan and tray slide types.
Door Construction
Double-pane tempered glass is encased by a heated,
heavy-duty aluminum extruded frame. Replaceable
snap-in door gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are chromeplated and non-corrosive. Doors are provided with
built-in cylinder locks which are keyed alike. Hinges
are cam-action, lift-off type featuring positive safety
stop at 120 degrees.