GRIDDLE STAND
REFRIGERATORS
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Standard Features
• Stainless Steel Exterior and Interior
• Plasticized Fin Evaporator Coil
• Capillary Dial Thermometer
• Anti-Sweat Drawer Heaters
• Chrome-Plated Hardware
• Heavy-Duty Diecast Flow-line Handle
• Heavy Gauge, Reinforced Stainless Steel
Finished Work Top With Drip Guard, Marine Edge
• One Piece Magnetic Snap-In Drawer Gaskets
• Automatic, Energy Saving, Non-Electric
Condensate Disposal
• Non-CFC Polyurethane Foam Insulation
• Easy Glide, Self-Closing Heavy-Duty Drawers
• Adjustable 6" Stainless Steel Legs
• 10' Cord and Plug Attached
• Performance Tested Refrigeration System
Utilizing Environmentally Safe R-134a Refrigerant
Optional Features & Accessories
•Heavy-Duty Casters •Special Electrical
•Remote Models Requirements
•Stainless Steel Pans • Digital Thermometer
Refrigeration System
The self-contained refrigeration system is mounted
within a side mounted housing, concealed behind a
stainless steel louvered grille. Full length air grille
allows for even air circulation to condensing unit. A
“Performance Rated”, air-cooled, hermetically
sealed, capillary type refrigeration system is
installed in each model. Contained behind mullion
are a plasticized finned coil and air circulating fans.
Our unique air flow design allows the cabinet to be
enclosed on both sides or, to be mounted flush
against a wall. Our refrigeration system, fully
charged with R-134a refrigerant, is designed to
maintain 38°-40°F while operating with an unrestricted air supply in ambient temperature of 100°
Fahrenheit. All condensate water is directed to a
non-electric condensate vaporizer located in the
compressor compartment, thus, no plumbing is
required. A strict quality assurance team inspects all
materials and components to certify that each
model conforms to the most exacting standards. All
models are performance tested for a minimum of 16
hours prior to crating.
Cabinet Construction
All materials are of top quality, and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is of all metal welded construction and is internally supported and
braced for rigid unit construction. Exterior cabinet
back and bottom are of heavy gauge galvanized
steel. Work top is constructed of heavy gauge polished stainless steel for durability.
Cabinet design eliminates overlapping panels with
raw edges. Interior corners are rounded with a 1/4"
radius for cleaning ease. All cabinet joints and
seams are vapor-tight sealed. Easily removable
anti-sweat drawer heaters, concealed by a nonmetallic, non-conductive, high impact thermal
breaker strip, eliminates condensation build-up on
case front.
Insulation
All cabinet walls, top, and bottom have high density, Foamed-in-place, non-CFC polyurethane insulation.
Drawer Construction
Drawer fronts and backs are constructed of heavy
gauge, polished stainless steel with heavy duty,
safety grip, chrome plated handles. All drawer
fronts are insulated with non-CFC polyurethane
foam insulation. Full extension, lift-out type drawer frames are of heavy gauge, welded stainless
steel mounted on heavy duty, easy glide, self closing drawer slides. Each drawer holds two 12" x 20"
x 4" deep pans (not furnished). Self adjusting, full
perimeter, magnetic snap-in gaskets guarantee
a positive seal.
DL2G-SS
DL1G-SS