Continental Refrigerator DL1FI-SS User Manual

ROLL-IN & ROLL-THRU

FREEZERS

Utilizing Environmentally Safe, CFC-free R-404A Refrigerant

Standard Features

•Modern, State-Of-The-Art Styling

•Performance Rated, "Plug" Refrigeration System Utilizing Environmentally Safe R-404A Refrigerant

•3" High Density, Non-CFC Polyurethane Foam

Insulation

•Chrome-Plated Flow Line Handles

•Cam-Action Lift-Off Hinges

•Cylinder Lock in Each Door

•Automatic Hot Gas Condensate Evaporator

•27

8" Wide, 66

2" High Door Openings

•External Digital Thermometer

•Automatic Electric Defrost

•Removable Stainless Steel Rack Guides

•Magnetic Snap-In Door Gaskets

•Unique Air Flow Distribution Ducts Keep Pan

•Product at Uniformly Constant

Temperatures

Optional Features & Accessories

•Roll-Thru •Glass Door

•Remote •Consult Factory

Standard (S/S Front, Aluminum Ends & Interior) Suffix SA (S/S Exterior, Aluminum Interior) Suffix SS (S/S Exterior & Interior)

DL1FI-SS

DL2FI-SS

REFRIGERATION SYSTEM

A "performance rated", air-cooled hermetically sealed, capillary type refrigeration system is installed on the top of each freezer. Plasticized fin coil and air circulating fans are contained within a concealed "plug" type insulated housing, readily accessible on the top of the cabinet and separate from the food zone to increase food storage capacity. The entire "plug" system is fully charged with environmentally safe R-404A refrigerant and mounted on a sturdy steel, rail type base, which can be easily removed if refrigerator conversion is desired. Freezers are designed to maintain 0 degrees Fahrenheit (-18 degrees Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100 degrees Fahrenheit. Automatic electric defrost timer initiates defrost cycles at predetermined intervals. All condensate water is evaporated by an automatic, non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and components to the most exacting standards. All models are factory performance-tested for a minimum of 16 hours prior to crating.

CABINET CONSTRUCTION

All materials are of top quality, and are assembled under rigid supervision conforming to strict quality assurance requirements. The cabinet front, doors, and interior bottoms, are constructed of heavy gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor tight. Case is of all metal welded construction and is internally supported and braced for rigid unit construction. Cabinet design eliminates overlapping panels with raw edges. Cabinet body and doors are insulated with non-CFC, foamed in place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located above the doors allows equal air circulation to the condensing unit. Easily removable, low-wattage, anti-sweat door heaters concealed by a non-metallic, nonconductive, high-impact thermal breaker strip eliminate condensate build up on the cabinet front. Automatic interior lighting is controlled by door openings. Cabinets are equipped with an easily removable stainless steel ramp and interior rack guides.

DOOR CONSTRUCTION

Doors shells are constructed of a heavy gauge stainless steel and are internally braced and urethane foam insulated for rigidity. Door corners are of welded construction and polished. Replaceable snap-in door gaskets are self-adjusting, heavy-duty, magnetic type. Doors handles and hinges are chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks, which are keyed alike. Hinges are cam action, lift-off type featuring a positive safety stop at 120 degree.

DL3FI-SS

FREEZERS

A Division of National Refrigeration & A/C Products, Inc. 539 Dunksferry Road Bensalem, PA 19020 (800) 523-7138 Fax: (215) 244-9579 www.continentalrefrigerator.com

DL1FI

SIDE VIEW

DL2FI

DL3FI

SPECIFICATIONS DL1FI-SS DL2FI-SS DL3FI-SS

DIMENSIONAL DATA ROLL-IN ROLL-THRU ROLL-IN ROLL-THRU ROLL-IN ROLL-THRU

Net Capacity (cu. ft.) 32 32 64 64 96 96 Width, Overall (in.) 351/2 351/4 681/2 681/2 1013/4 1013/4 Depth, Overall, Incl. Hdls.(in.) 351/2 39 351/2 39 351/2 39 Depth (Less Door(s))(in.) 32 32 32 32 32 32 Depth(Door(s) Open 90°)(in.) 65 98 65 98 65 98 Clear Door Width(in.) 273/

8 27

Clear Full-Door Height (in.) 661/2 661/2 661/2 661/2 661/2 661/2 Height, Overall (in.) 86 86 86 86 88 88 No. of Full Door(s) 1 2 2 4 3 6 Rack Capacity* 1 1 2 2 3 3

REFRIGERATION DATA

Condensing Unit Size (H.P.)

/4 Capacity (BTU/Hr)** 3530 3530 4150 4150 9250 9250 Refrigerant R-404A R-404A R-404A R-404A R-404A R-404A

ELECTRICAL DATA

Cabinet Specifications

115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1

Feed Wires (Incl. Ground) 4 4 4 4 4 4 Condensing Unit Specs.

208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1

Total Amperes 11.1 11.6 13.5 14.5 20.7 22.2 Cabinet Amperes 1.9 2.4 3.1 4.1 4.3 5.8 Defrost Amperes 9.6 9.6 9.6 9.6 19.2 19.2 Power Supply Cord no no no no no no

SHIPPING DATA

Height-crated (in.) 90 90 90 90 90 90 Width-crated (in.) 43 43 77 77 109 109 Depth-crated (in.) 42 42 42 42 42 42 Volume-crated (cu. ft.) 94 94 168 168 238 238 Weight Std-crated (lbs.) 475 550 780 900 960 1100 Weight SS-crated (lbs.) 580 660 825 950 1050 1210 Weight Std - uncrated (lbs.) 380 435 625 720 760 875 Weight SS - uncrated (lbs.) 460 530 660 760 840 960

Note: If the cabinet is located directly against a wall and/or under low ceiling, a minimum clearance of 12" is required.

8 27

/4 11 22

8 27

DLFI810