Continental Refrigerator DL1FI-RT-E User Manual

DESIGNER LINE ROLL-THRU FREEZER
Project Name:
Model: DL1FI-RT-E
1-Section Extra-High Roll-Thru Freezer with 72” Cart Capacity
Standard - Stainless steel front, aluminum end panels and interior Suffix SA- Stainless steel exterior, aluminum interior Suffix SS - Stainless steel exterior and interior
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back Roll-In Epoxy-coated steel shelves Hinged glass doors Chrome or stainless steel shelves Increased refrigeration systems Rehinging of doors (consult factory) Special electrical req. (consult factory) Expansion valve system Dial thermometer • One way security screws Remote models • Locking hasp (lock not included) Custom laminates • Stainless steel mesh cover Half doors • Coverless hinges
Consult factory for other model configurations, options and accessories.
Correctional Facility Options
Toll-Free: 800-523-7138
Phone: 215-244-1400 Fax: 215-244-9579
539 Dunksferry Road Bensalem, PA 19020
www.continentalrefrigerator.com
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Environmentally-safe R-404A refrigerant Self contained, performance-rated
“plug” refrigeration system Automatic hot gas condensate evaporator Unique air flow distribution ducts evenly distributes
air to all pan levels Refrigeration system is accessible on top of cabinet,
separate from the food zone
CABINET ARCHITECTURE
Removable stainless steel rack guides Removable stainless steel ramps Reinforced stainless steel floor 3” non-CFC polyurethane foam insulation Chrome-plated flow line handles Cam action, lift off hinges Magnetic snap-in door gaskets Cylinder lock in door Self-closing doors 72 1/2” high door openings (72”H rack capacity*)
Standard Finish
Stainless steel front, aluminum end panels and interior
-SA Finish
Stainless steel exterior, aluminum interior
-SS Finish
Stainless steel exterior and interior
MODEL FEATURES
External digital thermometer Energy saving switch for door heaters Automatic electric defrost
* Racks not supplied
IMPORTANT NOTE: Cabinet upper side panels and refrigeration “plug” system can be easily removed and reinstalled at installation site where space limitations are confining.
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 34 (963 cu l) Width, Overall (in.) 35 1/4 (895 mm) Depth, Overall (incl. handles) (in.) 38 3/4 (984 mm) Depth [less door] (in.) 32 (813 mm) Depth [door open 90°] (in.) 98 (2489 mm) Clear Door Width (in.) 27 3/8 (695 mm) Clear Full Door Height (in.) 72 1/2 (1842 mm) Height, Overall (in.) 92 (2337 mm) No. of Door(s) 2 Rack Capacity** 1 ea.
REFRIGERANT DATA
Condensing Unit Size (H.P.) 3/4 Capacity (BTU/Hr)* 3530
ELECTRICAL DATA
Voltage (int’l)
Feed Wires (incl. ground) 4 Total Amps (int’l) 11.6 (10.7) Defrost Amps (int’l) 9.6 (4.8) 10 ft. Cord/Plug [attached] (int’l) No (No)
SHIPPING DATA
Height - Crated (in.) 97 (2464 mm) Width - Crated (in.) 43 (1092 mm) Depth - Crated (in.) 42 (1067 mm) Volume - Crated (cu. ft.) 98 (2489 cu l) Weight Std - Crated (lbs.) 535 (243 kg) Weight SS - Crated (lbs.) 615 (279 kg) Weight Std - Uncrated (lbs.) 440 (200 kg) Weight SS - Uncrated (lbs.) 535 (243 kg)
* Rating @ -15°F evaporator, 90°F ambient ** Maximum rack size including wheels - 27”W x 29”D x 72”H
Figures in parentheses reflect metric equivalents rounded to the nearest whole millimeter.
Due to our continued efforts in developing innovative products, specifications subject to change without notice.
®
© Copyright 2013. Continental Refrigerator. A Division of National Refrigeration & Air Conditioning Products, Inc.
115/208-230/60/1 (220/50/1)
Toll-Free: 800-523-7138
Phone: 215-244-1400 Fax: 215-244-9579
539 Dunksferry Road Bensalem, PA 19020
www.continentalrefrigerator.com
MADE IN THE U.S.A.
Model Plan Views
35 1/4”
(895 mm)
15 1/2”
(394 mm)
92”
(2184 mm)
76 1/2”
(1781 mm)
FRONT VIEW
38 3/4”
(984 mm)
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum clearance of 12” is required.
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically sealed, capillary-type refrigeration system is in­stalled on the top of each freezer. Plasticized fin coil and air circulation fans are contained within a concealed “plug”-type insulated housing, readily accessible on top of the cabinet and separate from the food zone to increase food storage capacity. The entire “plug” system is fully charged with envi­ronmentally safe R-404A refrigerant and mounted on a sturdy steel, rail-type base which can be eas­ily removed if refrigerator conversion is desired. Freezers are designed to maintain 0°F (-18° Centi­grade) while operating with an unrestricted air sup­ply in a maximum ambient temperature of 100°F. Automatic electric defrost timer initiates defrost cycles at predetermined intervals. All condensate water is evaporated by an automatic, non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and components to certify that each model conforms to the most exacting standards. All models are factory performance- tested for a minimum of 16 hours prior to crating.
INSULATION
All cabinet walls, top and bottom have high density, foamed-in-place, non-CFC polyurethane insulation.
CABINET CONSTRUCTION
All materials are of top quality, assembled to con­form with strict quality-assurance requirements. The cabinet front is constructed of heavy-gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor-tight. Case is of
6”
(152 mm)
32”
(813 mm)
6”
(152 mm)
all metal, welded construction and internally sup­ported and braced for a rigid unit construction. Cabinet design eliminated overlapping panels with raw edges. Cabinet body is insulated with non­CFC, foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located above the doors allows equal air circula­tion to the condensing unit. Easily removable, low­wattage, anti-sweat door heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker strip eliminate condensate build-up on the cabinet front. Automatic interior lighting is con­trolled by door openings. Cabinets are equipped with an easily removable, stainless steel ramp and interior rack guides.
DOOR CONSTRUCTION
Solid hinged door shells are constructed of heavy­gauge stainless steel and are internally braced and urethane-foam-insulated for rigidity. Door corners are welded construction and polished. Replaceable snap-in door gaskets are self-adjusting, heavy­duty, magnetic type. Door handles and hinges are chrome-plated and non-corrosive. Doors are pro­vided with built-in cylinder locks which are keyed alike. Hinges are cam action, lift-off type featuring positive safety stop at 120 degrees.
DL1FI-RT-E (8/14/13)
Loading...