Continental Refrigerator DL1FE User Manual

DESIGNER LINE FREEZER

Project Name:

Model: DL1FE

1-Section Extra-Wide Reach-In Freezer (0°F) with Solid Door

DL1FE - Stainless steel front, aluminum end panels and interior DL1FE-SA - Stainless steel exterior, aluminum interior DL1FE-SS- Stainless steel exterior and interior Designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Environmentally-safe R-404A refrigerant Self contained, performance-rated “plug”

refrigeration system Refrigeration system is readily accessible on

top of cabinet, separate from the “food zone” Automatic, hot gas condensate evaporator

Options and Accessories

(upcharge and lead times may apply)

Stainless steel case back Pass-Thru Additional epoxy-coated steel shelves Shallow depth Chrome or stainless steel shelves Hinged glass doors Pan slide assemblies Increased refrigeration systems Expansion valve system Special electrical req. (consult factory) Casters Dial thermometer • One way security screws Remote models • Locking hasp (lock not included) Custom laminates • Stainless steel mesh cover Half doors • Coverless hinges

Consult factory for other model configurations, options and accessories.

Correctional Facility Options

CABINET ARCHITECTURE

3” non-CFC polyurethane foam insulation Chrome-plated flow line handle Cam action, lift off hinges Self-closing door Magnetic snap-in door gasket Cylinder lock in door Heavy-duty, epoxy-coated steel shelves Adjustable 6” stainless steel legs

MODEL FEATURES

LED interior lighting External digital thermometer Energy saving switch for door heaters Top and side air distribution ducts Cabinet upper side panels and refrigeration “plug”

system can be removed and reinstalled at job site Automatic electric defrost Rehinging of door (in the field)

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

DIMENSIONAL DATA

Net Capacity (cu. ft.) 22 (623 cu l) Width, Overall (in.) 28 1/2 (724 mm) Depth, Overall (incl. handle) (in.) 35 3/8 (899 mm) Depth [less door] (in.) 32 (813 mm) Depth [door open 90°] (in.) 58 (1473 mm) Clear Door Width (in.) 21 7/8 (556 mm) Clear Door Height (in.) 58 5/8 (1489 mm) Height, Overall (incl. 6” legs) (in.) 83 1/4 (2115 mm) No. of Doors 1 No. of Shelves 3 Shelf Area (sq. ft.) 20.4 (1.9 sq m) Tray Slide Capacity 24 ea.

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/3 Capacity (BTU/Hr)* 1590

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1) Feed Wires (incl. ground) 3 Total Amps (int’l) 6.3 (3.8) Defrost Amps (int’) 4.3 (2.2) 10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Height - Crated (in.) 85 1/2 (2172 mm) Width - Crated (in.) 31 5/8 (803 mm) Depth - Crated (in.) 42 (1067 mm) Volume - Crated (cu. ft.) 63 (1784 cu l) Weight Std - Crated (lbs.) 355 (161 kg) Weight SS - Crated (lbs.) 415 (188 kg) Weight Std - Uncrated (lbs.) 255 (116 kg) Weight SS - Uncrated (lbs.) 315 (143 kg)

* Rating @ -15°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest whole unit.

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative products, specifications subject to change without notice.

MADE IN THE U.S.A.

Model Plan Views

77 1/4”

(1962 mm)

83 1/4”

(2115 mm)

6”

(152 mm)

FRONT VIEW

SIDE VIEW

IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum clearance of 12” is required.

REFRIGERATION SYSTEM

A “performance rated”, air-cooled, hermetically sealed, capillary-type refrigeration system is installed on the top of each freezer. Plasticized fin coil and air circulation fans are contained within a concealed “plug”-type insulated housing, readily accessible on top of the cabinet and separate from the food zone to increase food storage capacity. The entire “plug” system is fully charged with environmentally safe R-404A refrigerant and mounted on a sturdy steel, rail-type base which can be easily removed if refrigerator conversion is desired. Freezers are designed to maintain 0°F (-18° Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100°F. All condensate water is evaporated by an automatic, non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and components to certify that each model conforms to the most exacting standards. All models are factory performancetested for a minimum of 16 hours prior to crating.

INSULATION

All cabinet walls, top and bottom have high density, foamed-in-place, non-CFC polyurethane insulation.

SHELVING

Shelves are designed for heavy-duty use with .306” diameter frame and brace members and .140” diameter fill wires spaced 3/4” apart. Shelves are welded steel and epoxy-coated for a durable, long, rust-free service life. Adjustments are in 1 inch increments and a wide door opening allows the use of a variety of optional pan and tray slide types.

21 7/8”

(556 mm)

DOOR OPENING

28 1/2”

(724 mm)

35 3/8”

(899 mm)

32”

(813 mm)

29”

(737 mm)

58 1/8”

(1476 mm)

CABINET CONSTRUCTION

All materials are of top quality, assembled to conform with strict quality-assurance requirements. The cabinet front is constructed of heavy-gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor-tight. Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminated overlapping panels with raw edges. Cabinet body is insulated with non-CFC, foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located above the doors allows equal air circulation to the condensing unit. Easily removable, low-wattage, anti-sweat door heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker strip eliminate condensate build-up on the cabinet front. Automatic interior lighting is controlled by door openings. Cabinets are equipped with 6 inch adjustable stainless steel legs.

DOOR CONSTRUCTION

Solid hinged door shells are constructed of heavygauge stainless steel and are internally braced and urethane-foam-insulated for rigidity. Door corners are welded construction and polished. Replaceable snap-in door gaskets are self-adjusting, heavyduty, magnetic type. Door handles and hinges are chrome-plated and non-corrosive. Doors are provided with a built-in cylinder lock. Hinges are cam action, lift-off type featuring positive safety stop at 120 degrees.

58 5/8”

(1489 mm)

DOOR OPENING

DL1FE (10/8/14)