BASE MODEL REFRIGERATOR
Project Name:
Model: CURA118-D
118” Undercounter Refrigerator
with Drawers
Stainless steel front and end panels, aluminum subtop and interior.
Designed to maintain NSF-7 temperatures in 100°F ambient.
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Performance-rated front breathing refrigeration system
Environmentally-safe R-134a refrigerant
Unique forced air design utilizes fans (approx. every 12”)
across the entire back of unit for even distribution of cold
Automatic, energy saving, non-electric
condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, slide-out condensing unit
Options and Accessories
(upcharge and lead times may apply)
Door in lieu of drawers Stainless steel back and interior
Drawer section above the condensing unit* Condensing unit left or right
Automatic, electric condensate evaporator Door/drawer locks
Exterior dial or digital thermometer Adjustable legs
*Drawer section above condensing unit holds (1) 12 x 20 x 6 pan
CABINET ARCHITECTURE
2” non-CFC polyurethane foam insulation
Spring loaded, self closing door (over condensing unit)
Magnetic snap-in door/drawer gaskets
Stainless steel roll-out drawers
3 5/8” casters
Completely enclosed, vented and removable rear grill
Refrigerated door section above the condensing unit
MODEL FEATURES
Expansion valve for quick recovery
Built-in, off cycle defrost timer
Interior hanging thermometer
Field rehingeable door (over condensing unit)
NOTE: CURA-D models come standard with a door over the condensing
unit. A drawer over the condensing unit is an option.
Front breathers are a unique, field assembled, bottom mounted ventilation
system designed to allow cabinets to be flush against a wall or built into a
counter to conserve space.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 44 (1246 cu l)
Width, Overall (in.) 118 3/16 (3002 mm)
Depth, Overall (in.)
(incl. handles & bumpers)
Height, Overall (in.) (incl. 3 5/8” casters) 31 13/16 (808 mm)
No. of Drawers 8
No. of Half Doors 1
Interior Depth (in.) (above condenser) 30 (762 mm)
Interior Height (in.) (above condenser) 12 1/2 (318 mm)
Interior Width (in.) (above condenser) 17 (432 mm)
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/2
Capacity (BTU/Hr)* 5600
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Fans 6
Total Amps (int’l) 15.2 (n/a)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Weight (lbs.) 705 (320 kg)
Height - Crated (in.) 43 3/4 (1111 mm)
Width - Crated (in.) 120 (3048 mm)
Depth - Crated (in.) 47 (1194 mm)
DRAWER PAN CONFIGURATIONS
Two Tier: (2) 12 x 20 x 4 pans (top)
and (2) 12 x 20 x 6 pans (bottom)
Three Tier: (1) 12 x 20 x 4 pan (top)
and (2) 12 x 20 x 4 pans per drawer (center & bottom)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
36 1/16 (916 mm)
FRONT VIEW
Model Plan Views
118 3/16”
(3002 mm)
36 1/16”
(916 mm)
32”
812 mm)
12 1/2”
(318 mm)
1”
(25 mm)
31 13/16”
(808 mm)
17”
(432 mm)
Equipped with one NEMA-5-15P Plug
(varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2016. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
3 5/8”(92 mm)
SIDE VIEW
CURA118-D (4/5/16)