Continental Refrigerator CUFA43-D User Manual

BASE MODEL FREEZER (0°F)

Project Name:

Model: CUFA43-D

43” Undercounter Freezer with Drawers

Stainless steel front and end panels, aluminum subtop and interior.

Designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated front breathing refrigeration system Environmentally-safe R-404A refrigerant Unique forced air design utilizes fans (approx. every 12”)

across the entire back of unit for even distribution of cold Automatic, energy saving, non-electric

condensate evaporator Non-corrosive, plasticized fin evaporator coil Easily serviceable, slide-out condensing unit

Options and Accessories

(upcharge and lead times may apply)

Door in lieu of drawers Condensing unit left or right Automatic, electric condensate evaporator Door/drawer locks Exterior dial or digital thermometer Adjustable legs Stainless steel back and interior

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation Spring loaded, self closing door (over condensing unit) Magnetic snap-in door/drawer gaskets Stainless steel roll-out drawers 3 5/8” casters Completely enclosed, vented and removable rear grill Refrigerated door section above the condensing unit

MODEL FEATURES

Expansion valve for quick recovery Automatic electric defrost Interior hanging thermometer Field rehingeable door (over condensing unit)

NOTE: CUFA-D models come standard with a door over the condensing unit. A drawer over the condensing unit is not available on Undercounter Freezer models.

Front breathers are a unique, field assembled, bottom mounted ventilation system designed to allow cabinets to be flush against a wall or built into a counter to conserve space.

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

(25 mm)

DIMENSIONAL DATA

Net Capacity (cu. ft.) 12 (340 cu l) Width, Overall (in.) 43 3/16 (1097 mm) Depth, Overall (in.)

(incl. handles & bumpers)

Height, Overall (in.) (incl. 3 5/8” casters) 31 13/16 (808 mm) No. of Drawers 2 No. of Half Doors 1 Interior Depth (in.) (above condenser) 30 (762 mm) Interior Height (in.) (above condenser) 12 1/2 (318 mm) Interior Width (in.) (above condenser) 17 (432 mm)

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/3 Capacity (BTU/Hr)* 1340

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1) Fans 2 Total Amps (int’l) 6.1 (3.7) 10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 340 (154 kg) Height - Crated (in.) 43 3/4 (1111 mm) Width - Crated (in.) 45 (1143 mm) Depth - Crated (in.) 47 (1194 mm)

DRAWER PAN CONFIGURATIONS

Two Tier: (2) 12 x 20 x 4 pans (top)

and (2) 12 x 20 x 6 pans (bottom) Three Tier: (1) 12 x 20 x 4 pan (top)

and (2) 12 x 20 x 4 pans per drawer (center & bottom)

* Rating @ -15°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest whole unit.

36 1/16 (916 mm)

FRONT VIEW

Model Plan Views

43 3/16”

(1097 mm)

36 1/16”

(916 mm)

32”

812 mm)

12 1/2”

(318 mm)

17”

(432 mm)

1”

31 13/16”

(808 mm)

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative products, specifications subject to change without notice.

MADE IN THE U.S.A.

3 5/8”(92 mm)

SIDE VIEW

CUFA43-D (4/5/16)