Continental Refrigerator CRA60-BS-D User Manual

BASE MODEL REFRIGERATOR

Project Name:

Model: CRA60-BS-D

60” Worktop Refrigerator with Drawers (Door on Smaller Width Section) and 6” Backsplash

Heavy gauge #300 Series stainless steel top, stainless steel front and end panels, galvanized steel rear and grill and aluminum interior.

Designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system Environmentally-safe R-134a refrigerant Unique forced air design utilizes fans (approx. every 12”)

across the entire back of unit for even distribution of cold Automatic, energy saving, non-electric

condensate evaporator Non-corrosive, plasticized fin evaporator coil Easily serviceable, slide-out condensing unit

Options and Accessories

(upcharge and lead times may apply)

Door in lieu of drawers (larger section) Stainless steel back and interior Drawer section above the condensing unit* Condensing unit left or right Overshelves (single or double) Remote models Automatic, electric condensate evaporator Door/drawer locks Exterior dial or digital thermometer Adjustable legs Additional epoxy-coated steel shelves Front breathing Stainless steel shelves

*Drawer section above condensing unit holds (1) 12 x 20 x 6 pan

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation Spring loaded, self closing doors

(smaller section and over condensing unit) Magnetic snap-in door/drawer gaskets Stainless steel roll-out drawers (larger section) 5” casters Completely enclosed, vented

and removable rear and side grills Refrigerated door section above the condensing unit

MODEL FEATURES

Expansion valve for quick recovery Built-in, off cycle defrost timer Interior hanging thermometer Field rehingeable door (over condensing unit)

NOTE: CRA60-D drawer models come standard with a door over the condensing unit, a solid door (left section) and two tier drawers (center section). A drawer over the condensing unit is an option. The option of having the door/drawers located in the opposite sections MUST be indicated at the time of ordering.

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

Model Plan Views

DIMENSIONAL DATA

Net Capacity (cu. ft.) 19 (538 cu l) Width, Overall (in.) 60 (1524 mm) Depth, Overall (in.)

(incl. handles & bumpers)

36 1/16 (916 mm)

Height, Overall (in.) (incl. 5” casters) 40 1/2 (1029 mm) Shelf Area (sq. ft.) 5.6 (.5 sq m) No. of Shelves 2 No. of Drawers 2 No. of Full Doors 1 No. of Half Doors 1 Interior Depth (in.) (above condenser) 30 (762 mm) Interior Height (in.) (smaller section) 26 (660 mm) Interior Height (in.) (above condenser) 12 1/2 (318 mm) Interior Width (in.) (smaller section) 17 (1422 mm) Interior Width (in.) (above condenser) 17 (1422 mm)

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/3 Capacity (BTU/Hr)* 3100

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1) Fans 3 Total Amps (int’l) 12.3 (8.1) 10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 415 (188 kg) Height - Crated (in.) 43 3/4 (1111 mm) Width - Crated (in.) 62 (1575 mm) Depth - Crated (in.) 47 (1194 mm)

DRAWER PAN CONFIGURATIONS

Two Tier: (2) 12 x 20 x 6 pans per drawer Three Tier: (1) 12 x 20 x 4 pan per drawer (top)

and (2) 12 x 20 x 4 pans per drawer (center & bottom)

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest whole unit.

26”

(661 mm)

FRONT VIEW

(127mm)

17”

(432 mm)

5”

60”

(1524 mm)

36 1/16”

(916 mm)

34”

(864 mm)

12 1/2”

(318 mm)

17”

(432 mm)

1”

(25 mm)

40 1/2”

(1029 mm)

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative products, specifications subject to change without notice.

MADE IN THE U.S.A.

SIDE VIEW

Equipped with one NEMA-5-15P Plug

(varies by country)

CRA60-BS-D (8/10/15)