Continental Refrigerator CRA60-10-D User Manual
BASE MODEL SANDWICH UNIT
Project Name:
Model: CRA60-10-D
60” Standard Top Sandwich Unit
Refrigerator with Drawers - 10 Pans
Heavy gauge #300 Series stainless steel top, stainless steel front
and end panels, galvanized steel rear and grill and aluminum interior.
Certified under NSF-7 to maintain temperatures in 86°F ambient
and designed to maintain NSF-7 temperatures in 100°F ambient.
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Performance-rated refrigeration system
Environmentally-safe R-134a refrigerant
Unique air flow distribution allows
pan product to maintain 33° - 41°F
Automatic, energy saving, non-electric
condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, slide-out condensing unit
Options and Accessories
(upcharge and lead times may apply)
Door in lieu of drawers (larger width section) Expansion valve system
Drawer section above the condensing unit* Stainless steel shelves
Overshelves (single or double) Flat insulated night cover
Condensing unit left or right Remote models
Additional epoxy-coated steel shelves Door/drawers locks
Automatic, electric condensate evaporator Adjustable legs
Exterior dial or digital thermometer Crumb catcher
Rear-mounted cutting board Front breathing
Stainless steel pan slides (larger width section only)
*Drawer section above condensing unit holds (1) 12 x 20 x 6 pan
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
CABINET ARCHITECTURE
2” non-CFC polyurethane foam insulation
Spring loaded, self closing doors
Magnetic snap-in door/drawer gaskets
Heavy-duty, epoxy-coated steel shelves
Stainless steel roll-out drawers
12” deep, full length nylon cutting board
Insulated lid
5” casters
Completely enclosed, vented
and removable rear and side grills
Refrigerated door section above the condensing unit
MODEL FEATURES
(10) 1/6 size non-recessed pans, 4” deep
Interior hanging thermometer
Field rehingeable doors
NOTE: CRA60-D models come standard with a door over the condensing
unit, a smaller width solid door on the left section and two tier drawers
in the center section. A drawer over the condensing unit is an option. The
option of having the door/drawers located in the opposite sections MUST
be indicated at the time of ordering.
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 19 (538 cu l)
1/6 Size Pans (4” deep) 10
Width, Overall (in.) 60 (1524 mm)
Depth, Overall (in.)
(incl. handles & bumpers)
Depth, Cutting Board (in.) 12 (305 mm)
Height, Overall (in.) (incl. 5” casters) 42 (1067 mm)
Shelf Area (sq. ft.) 5.6 (.5 sq m)
No. of Shelves 2
No. of Full Doors / Drawers 1 / 2
No. of Half Doors 1
Interior Depth (in.) 30 (762 mm)
Interior Height (in.) (smaller section) 26 (660 mm)
Interior Height (in.) (above condenser) 12 1/2 (318 mm)
Interior Width (in.) (smaller section) 17 (1422 mm)
Interior Width (in.) (above condenser) 17 (1422 mm)
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/3
Capacity (BTU/Hr)* 2300
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Fans 3
Total Amps (int’l) 6.7 (3.2)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Weight (lbs.) 420 (191 kg)
Height - Crated (in.) 43 3/4 (1111 mm)
Width - Crated (in.) 62 (1575 mm)
Depth - Crated (in.) 47 (1194 mm)
DRAWER PAN CONFIGURATIONS
Two Tier: (1) 12 x 20 x 6 pan & (3) 1/6 x 6 pans (top)
(2) 12 x 20 x 6 pans (bottom). Three tier not available.
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
36 1/16 (916 mm)
1 1/8”
(29 mm)
FRONT VIEW
45 41/64”
(1159 mm)
35”
(889 mm)
(432 mm)
26”
(660 mm)
5”
(127mm)
Model Plan Views
17”
60”
(1524 mm)
36 1/16”
(916 mm)
34”
(864 mm)
12 1/2”
(318 mm)
24 9/16”
(624 mm)
(432 mm)
17”
(25 mm)
1”
42”
(1067 mm)
Equipped with one NEMA-5-15P Plug
(varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2014. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
SIDE VIEW
34”
(864 mm)
PAN TOP CONFIGURATION
60”
(1524 mm)
24 9/16”
(624 mm)
12”
(305 mm)
CRA60-10-D (9/8/14)
Loading...