Continental Refrigerator CPA60 User Manual

PIZZA PREPARATION TABLE

Project Name:

Model: CPA60

60” Pizza Preparation Refrigerator with Solid Doors

Heavy gauge #300 Series stainless steel top, stainless steel front and end panels, galvanized steel rear and grill and aluminum interior.

Certified under NSF-7 to maintain temperatures in 86°F ambient and designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system Environmentally-safe R-134a refrigerant Unique forced air design utilizes fans (approx. every 12”)

across the entire back of unit for even distribution of cold Automatic, energy saving, non-electric

condensate evaporator Non-corrosive, plasticized fin evaporator coil Easily serviceable, slide-out condensing unit

Options and Accessories

(upcharge and lead times may apply)

Drawers in lieu of door (larger section only) Condensing unit left or right Drawer section above the condensing unit* Overshelves (single or double) Stainless steel pan slides (larger section only) Wire rod garnish rack Additional epoxy-coated steel shelves Remote models Automatic, electric condensate evaporator Door locks Exterior dial or digital thermometer Adjustable legs Stainless steel back and interior Front breathing

*Drawer section above condensing unit holds (1) 12 x 20 x 6 pan

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation Spring loaded, self closing doors Magnetic snap-in door gaskets Heavy-duty, epoxy-coated steel shelves 19” deep, full length nylon cutting board Insulated lid 5” casters Refrigerated door section above the condensing unit

MODEL FEATURES

“Ergonomically-friendly” raised angle rail Expansion valve for quick recovery Built-in, off cycle defrost timer Interior hanging thermometer Field rehingeable doors

NOTE: CPA60 models come standard with a door over the condensing unit, a smaller width door (left section) and larger width door (center section). A drawer over the condensing unit is an option. The option of having the door/drawers located in the opposite sections MUST be indicated at the time of ordering.

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

Model Plan Views

DIMENSIONAL DATA

Net Capacity (cu. ft.) 19 (538 cu l) Width, Overall (in.) 60 (1524 mm) Depth, Overall (in.)

(incl. handles & bumpers)

36 7/8 (937 mm)

Height, Overall (in.) (incl. 5” casters) 39 7/16 (1002 mm) Depth, Cutting Board (in.) 19 (483 mm) Pan Capacity (pans supplied by others) (8) 1/3 Shelf Area (sq. ft.) 7.1 (.7 sq m) No. of Shelves 2 No. of Full Doors 2 No. of Half Doors 1 Interior Depth (in.) 27 3/8 (695 mm) Interior Height (in.) 26 (660 mm) Interior Height (in.) (above condenser) 12 1/2 (318 mm) Interior Width (in.) 56 (1422 mm)

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/2 Capacity (BTU/Hr)* 3100

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1) Fans 4 Total Amps (int’l) 13.0 (8.4) 10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 425 (1111 kg) Height - Crated (in.) 43 3/4 (1111 mm) Width - Crated (in.) 62 (1575 mm) Depth - Crated (in.) 47 (1194 mm)

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest whole unit.

(660 mm)

FRONT VIEW

35”

(889 mm)

26”

39”

(559 mm)

17”

(432 mm)

26”

(661 mm)

60”

(1524 mm)

36 7/8”

(937 mm)

(432 mm)

30”

(762 mm)

13 1/2”

(343 mm)

17”

(432 mm)

39 7/16”

(1002 mm)

49 3/4”

(1264 mm)

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative products, specifications subject to change without notice.

MADE IN THE U.S.A.

5”

(127mm)

SIDE VIEW

CPA60 (3/17/15)