Continental Industries I.D. SEAL User Manual

GRIPPER

HUB

SHELL

INTERNAL SEAL

P.E. OVERSHOOT

STIFFENER

Continental Industries, Inc.

4102 South 74th East Avenue

Tulsa, Oklahoma 74145

p(800) 558-1373 / f [phone]

www.conind.com

I.D. SEAL® CON-STAB FITTINGS

Continental Industries, Inc.

The Con-Stab I.D. Seal® ttings provide the user
with the following advantages:

• Cost effective joining method

• Simple assembly

• No additional assembly equipment required
for installation (just chamfer pipe and push)

• Expanded product line with various
congurations and material options
(PE 2406 or PE 3408/4710)

• Uni-body design eliminating all external parts

• Pressure rating that meets or exceeds the
maximum design pressure of the piping
system

• Meets or exceeds all D.O.T., ASTM and
NFPA 58 requirements

1-800-558-1373

visit www.conind.com

Each Con-Stab I.D. Seal®

tting provides the following
unique features:

• Two internal seals

• Fixed stiffener

• Self-locking gripper

• Moisture lip

• Uni-body construction

Continental Industries is an
ISO 9001 Certied Company.
Continental’s Con-Stab I.D.

Seal® product line is

manufactured and tested to the
following industry standards.

• ASTM D 2513 “Standard
Specication for
Thermoplastic Gas
Pressure Pipe, Tubing
and Fittings”

• ASME B31.8-1995 “Gas
Transmission and
Distribution Piping
Systems”

• D.O.T., Title 49 of the
Code of Federal
Regulations, Part

192.283 (b)

• NFPA 58, LP-Gas Code

0000-99-1031-01 ECN 2184 REV “C” 11/07