Continental Conair FRS216 User Manual

by

FRS316

UHF FM TRANSCEIVER (Family Radio Service)

L
L

A

SC

C

C

AN

N

U

F

CH

22

MIC

IMPORTANT SERVICE INFORMATION

Read this manual before attempting to set up or use this instrument.
It contains important information regarding safe installation and use.
Keep this manual for future reference. Also save the carton, packing
and proof of purchase to simplify and accelerate any needed action.

SAVE THESE INSTRUCTIONS

FRS316

BLISTER PACK CONTENTS

FRS316-Two (2) Two-Way Radios

User-Removable Belt Clips*

Two (2) Rechargeable Battery Packs

FRS Charger with AC/DC Adaptor

BATT 1 BATT 2

FRS1 FRS 2

FRS310HT IB-4833 Printed in China

FCC NOTICE

The FCC requires that you be advised of certain requirements involving the use of
this device. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
residential installation. This device uses and can generate radio frequency energy.
If not installed and used in accordance with the instructions, it may cause harmful
interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception (which can be determined by
turning the unit off and on), the user is encouraged to correct the interference by
one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

User's Manual

FCC Licensing Information Insert

* Attached to the units at the time of packing

1

FRS PRODUCT DESCRIPTION

The FRS/GMRS is the newest generation in personal two-way communications.
The FRS/GMRS operates in a licensed radio band (FCC license is needed for its
operation), on any of the GMRS channels.

The FRS316 is a lightweight, compact two-way radio that can be used up to
about two miles with family or friends at parks, shopping malls, sporting events,
concerts--any indoor or outdoor activity!

The FRS316 is compatible with other brands utilizing the same frequency
band (operating in the frequency range from 462.5625MHz to 462.7250MHz).

The FRS316 is a 22-channel UHF two-way radio, featuring a multi-functional
LCD panel (which indicates the current channel and various radio status icons).
Other features also include electronic volume control and battery save circuitry.

Please read this user's manual thoroughly to get the most out of your FRS316
two-way radio.

FCC INFORMATION: This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:(1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Privacy of communications
may not be ensured when using this equipment.

FCC WARNING: This equipment generates or uses radio frequency energy.

Adjustment to this unit or replacement of any transmitter component (crystal,
semiconductor, etc.) to this unit that could result in violation of the rules.

SAFETY INFORMATION: Your wireless hand-held portable transceiver

contains a low power transmitter. When the PUSH TO TALK (PTT) button is pushed it
sends out radio frequency (RF) signals. The device is authorized to operate at a duty
factor not to exceed 50%. In August 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for hand-held wireless
devices.

2

CAUTION: To maintain compliance with the FCC's RF exposure guidelines hold

the transmitter and ANTENNA at least 1 inch (2.5 cm) from your face and speak
in a normal voice, with the ANTENNA pointed up and away from the face. If you
wear the handset on your body while using the headset accessory, use only the
supplied belt clip for this product and when transmitting, take it out of the belt to
ensure that the ANTENNA is at least 1 inch (2.5 cm) from your body.

Use only the supplied ANTENNA. Unauthorized antennas, modifications, or
attachments could damage the transmitter and may violate FCC regulations.

NOTE: The maximum transmission range will vary depending on terrain and

environment. Range will be greater in open fields, while the range is shorter within
and around buildings or large structures.

3

SAFETY INSTRUCTIONS FOR BATTERIES

CAUTION: To reduce the risk of fire or personal injury, read and follow these
instructions.:

CONTAINS NICKEL-CADMIUM BATTERY.
BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY.

1. Use only a CONAIR approved battery pack in FRS316.
a. GP35AAAK4BX 4.8V 350mA GPI International Ltd. or
b. JB35AAANC4BC 4.8V 350mA JB Energy (HK) Ltd.

2. Do not dispose of the battery in a fire, as it may explode. Check with local
codes for possible special disposal instructions.

3. Do not open or mutilate the battery. Released electrolyte is corrosive and
may cause damage to the eyes and skin. It may be toxic if swallowed.

4. Exercise care in handling batteries in order not to short the battery with
conducting materials such as rings, bracelets and keys. The battery or
conduction material may overheat and cause burns.

5. Charge the battery (ies) provided with or identified for use with this product
only in accordance with the instructions and limitations specified in this
manual.

6. Observe proper polarity orientation between the Battery Pack and battery
charger.

CONTROLS DIAGRAM

EAR/MIC JACK

BELT CLIP
(Located on the rear side)

TX LED

PTT (Push
To Talk)

MON(MONITOR)

S

C

SCAN

MIC

SPEAKER

BATTERY COVER LATCH
(located on the rear side)

A

N

MIC

FRS Cavity

BATTERY Cavity

POWER-IN CONNECTION Jack

(Located on the rear side)

BATT 1BATT 1 BATT 2BATT 2

FRS1FRS1 FRS 2FRS 2

MAXIMUM RANGE PERFORMANCEMAXIMUM RANGE PERFORMANCE

ANTENNA

LCD

UP / DOWN

L
L

A

C

C

N

U

F

CH

22

FUNC (FUNCTION)

CALL

POWER

BATTERY
COMPARTMENT
(on the rear side)

natural resources.

4

DESCRIPTION

FRS316 UNIT

Ear/Mic Jack - This jack is used for optional accessories with Ø2.5mm stereo plug (not
included).

Belt Clip - For your convenience, a removable belt clip is included to secure the radio to

a belt, pocket, or any other convenient location.

Transmit (TX) LED - Illuminates in red when transmitting (TX).
PTT (Push To Talk) Button / Switch - Used for transmitting (making a call).
Mon (Monitor) Button - Lets you listen in on a channel for weak signals.
Scan Button - Used to activate/deactivate the channel scan.
Battery Cover Latch - Secures the battery cover in place.

alkaline batteries (not included).

Power Button - Press and hold the power button to turn your unit ON/OFF.
Func (Function) Button - Allows you to change channels. Press and hold for 5 seconds

to LOCK the buttons.

Call Button - Send call tones for alert or identification purposes.
Up ( ) and Down ( ) Buttons - Used for adjusting the volume level and changing

the channel.

LCD (Liquid Crystal Display) Panel - A multi-functional display which shows channels

and other radio status/icons.

Antenna - This is a fixed antenna.

DESKTOP CHARGER

FRS Cavity - Used to charge the FRS unit. The FRS unit should be in upright position.
BATTERY Cavity - Used to charge the NI-Cd rechargeable battery pack (included).
POWER-IN CONNECTION Jack
CHARGE LED Indicators - Illuminates in red when the Ni-Cd rechargeable battery or

the FRS unit is being charged.

CHARGE LED Indicators

5

INSTALLATION

Removing the Belt Clip

1.) BELT CLIP LATCH

2.) BELT CLIP

BELT CLIP SLOT

FIGURE 1

(REAR VIEW)

1. Pull the BELT CLIP LATCH (1) away from the unit.

2. While pulling the BELT CLIP LATCH (1), push up on the BELT CLIP (2)
to remove it from the unit, as shown in Figure 1.

Installing the Belt Clip

1. Slide the BELT CLIP into the BELT CLIP SLOT as shown in Figure 2.

FIGURE 2

(REAR VIEW)

6

7