Continental Automotive TR7412UB User Manual

OWNER'S MANUAL

TR7412UB-OR

Safety Information

Specifications

Contents

Thank you for purchasing this product, please
read the manual carefully before operating,
and reserve it for future reference.

PRECAUTIONS

• Only in a 12-volt DC negative-ground
electrical system.

• Disconnect the vehicle's negative battery
terminal while mounting and connecting
the unit.

• When replacing the fuse, be sure to use
one with an identical amperage rating.

Using a fuse with a higher amperage

rating may cause serious damage to the
unit.

• Make sure that pins or other foreign
objects do not get inside the unit, they
may cause malfunctions, or create safety
hazards such as electrical shock.

• If you have parked the car for a long
time in hot or cold weather, wait until the
temperature in the car becomes normal
before operating the unit.

• Keep the volume at a level at which you
can hear outside warning sounds (horns
sirens, etc.).

CAUTION

• DO NOT open covers and do not
repair by yourself. Ask the dealer or an
experienced technician for help.

General

Power supply: 12V DC (10.8V-16V)

Maximum power output: 4X41W

Suitable speaker impedance: 4ohm

Fuse spec: 10A

Weight: 0.7kg

Dimensions (WxDxH): 188x116.3x58.5mm

Frequency Table

Safety Information .......................................1

Specifications

Panel Controls

Button Tips

Bluetooth Functions.......................................4

USB function Summarization

Electrical connectons.................................5

Troubleshooting

............................................... 1

..............................................2

....................................................3

.........................4

............................................6

BEFORE OPERATION

• Do not raise the volume level too much,
as this will block outside sounds, making
driving dangerous.

• Stop the car before performing any
complicated operation.

Note:
1 According to models with different wiring
harness to connect the definition of the
specific content, please refer to the model
label.
2 Specifications and the design are subject to
change without notice due to improvements
in technology.

1

Panel Controls

(1). - Microphone
(2). - Power on/off,

- Mute,
when on,hold it more than 2 seconds to
power off.

- Rotate the VOL knob to adjust volume.
(3). - Source
Radio,
USB (when USB inserted),
AUX IN,
A2DP,
Hold it more than 2 seconds to select PTY
mode.
(4). - Band switch:
FM1 -> FM2 -> FM3 -> MW1 -> MW2-> LW

- Hold it Automatically search station and
store the signal strongly station to 1-6
Preset.
(5). - Press SEL and rotate VOL knob to
select EQ preset mode:

EQ OFF-POP-CLASSIC-ROCK-JAZZ

- Press to enter,when selecting the PTY
mode,

- Press SEL and rotate VOL knob to

ajust the time,when on the CLOCK
mode.
(6). - Display system clock

- Hold it to setting clock

- Radio mode:

display PTY info/system clock/
current channel ,

- MP3 mode:

Turn and turn about folder name/file name/
ID3 TAG/Clock .
(7). - Radio mode

- Auto search the station from high to low

- MP3 mode

Select the previous track

2

(8). - Radio mode
Auto search the station from low to
high

- MP3 mode
Select the next track
(9). - USB slot
(10). - MP3 folder ahead/Hang up
(11). - MP3 folder back/Contact mode/
Dial/Call transfer
(12). - MP3 random play
(13). - MP3 repeat play
(14). - Program intro play(10 sec.)
(15). - Play/pause
(10-15).

-1-6 radio preset
Press to tune in a preset station.
Hold for more than 2 seconds to
store current station.