Tire Pressure Monitoring System
User manual
Type
TIS-15N
ASK/FSK 433.92 MHz
4800/9600bps
1 of 5
1. SYSTEM OVERVIEW
The tire pressure monitoring system (referred as TG for Tire Guard) consists of the following
units:
- Tire guard wheel unit type TIS-15N which includes an integrated pressure, temperature and
acceleration sensor and a RF transmitter.
- LF receiver unit which includes a LF receiver (not described in this document)
The TG monitors a vehicle's tire pressure whilst driving or stationary. An electronic unit (wheel
unit) inside each tire, mounted to the valve stem, periodically measures the actual tire pressure.
By means of RF communication, this pressure information is transmitted to the RF transmitter.
2. TECHNICAL DESCRIPTION
Carrier frequency: 433.92 MHz
Number of channels: 1
Type of modulation: Frequency Shift Keying (FSK), Amplitude Shift Keying (ASK)
Baud rate: 4096/9600bps
Rated Output Power: < 10mW
Antenna: Internal
Voltage supply range: 2.1 up to 3.2V
Temperature Range: -40°C to +120°C
Frame length = 12 bytes = 96 bits
2.1. USA LABEL AND OWNER MANUAL ENTRY
Continental
TIS-15N
FCC ID: KR5TIS-15N
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
2 of 5