Tire Pressure Monitoring System
-Wheel Unit-
Type
TIS-15
- 2 -
1. SYSTEM OVERVIEW
The tire pressure monitoring system (referred as TG for Tire Guard = TG1C_G3) consists of
the following units:
- Tire guard wheel unit type TIS-15 which includes an integrated pressure, temperature and
acceleration sensor and a RF transmitter.
- LF receiver unit which includes a LF receiver (not described in this document)
The TG monitors a vehicle's tire pressure whilst driving or stationary. An electronic unit
(wheel unit) inside each tire, mounted to the valve stem, periodically measures the actual tire
pressure.
By means of RF communication, this pressure information is transmitted to the RF
transmitter.
2. TECHNICAL DESCRIPTION
Carrier frequency: 433.92 MHz
Number of channels: 1
Type of modulation: Frequency Shift Keying (FSK)
Amplitude Shift Keying (ASK)
Baud rate: 9600bps
Rated Output Power: < 10mW
Antenna: Internal
Voltage supply range: 2.1 up to 3.2V
Temperature Range: -40°C to +100°C