Continental Automotive GmbH
User Manual
of the
Continental
Tire Pressure Generation 1C wheel unit
Type
TIS-07
(FSK 433.92MHz)
Josef Lohr
I BS PG3 CFRF WM 1 of 4
Continental Automotive GmbH
1. SYSTEM OVERVIEW
The tire pressure monitoring system (referred as TG for Tire Guard) consists of the following
units:
- Tire guard wheel unit type TIS-07 which includes an integrated pressure, temperature and
acceleration sensor and a RF transmitter.
- RF receiver unit which includes a RF receiver (not described in this document)
The TG monitors a vehicle's tire pressure whilst driving or stationary. An electronic unit (wheel
unit) inside each tire, mounted to the valve stem, periodically measures the actual tire pressure.
By means of RF communication, this pressure information is transmitted to the RF transmitter.
2. TECHNICAL DESCRIPTION
Carrier frequency: 433,92 MHz
Number of channels: 1
Type of modulation: Frequency Shift Keying (FSK)
FSK deviation ±20kHz (min) to ±40kHz (max)
Baud rate: 19200 bps
Rated Output Power: < 10mW
Antenna: Internal (PCB)
Voltage supply: 1 Lithium battery 3V (CR2050)
Voltage supply range: 2.1 up to 3.2V
Size: L (76,21mm) x W (51,8mm) x H (15,7mm)
Weight: 31,6g
Temperature range: -40°C - 120°C
Josef Lohr
I BS PG3 CFRF WM 2 of 4