Continental Automotive FLEXCM User Manual
Installation Instruction
Designed b
Date
Department
Released by
Date Department
Designation
Document
Version Pages
1/ 19
Autor:
Anton Kolar, I CVAM RD TTS SY1
Continental Automotive GmbH
Heinrich-Hertz-Straße 45
D-78052 Villingen-Schwenningen
Postfach1640
D-78006 Villingen-Schwenningen
Tel: +49 7721 / 67 – 3128
Fax: +49 7721 / 67 - 793128
E-Mail: Anton.Kolar@continental-corporation.com
Revision
Release
1.2
Installation Instruction
Anton Kolar
29.06.2017
I CVAM TTS LRH
Continental Automotive G mbH
Installation Instruction
Installation Instructions
Designed b
Date
Department
Released by
Date Department
Designation
Document
Version Pages
2/ 19
Rev.
Date
Status
Author
Remarks
1.0
29.06.2017
Final
Anton Kolar
1.1
26.07.2017
Final
Dr. Marion Grüner
Update after review from the test lab
“Seimic”
1.2
03.08.2017
Final
Dr. Marion Grüner
Update after review from the test lab
“Seimic” about the usage of the antennas
1
History
Anton Kolar
Continental Automotive G mbH
29.06.2017
Installation Instruction
I CVAM RD TTS SY1
Dr. M.Grüner
ICVAMTTSLRH
Installation Instructions
Designed b
Date
Department
Released by
Date Department
Designation
Document
Version Pages
3/ 19
1 History ............................................................................................................................................. 2
2 Delivery content and general note .................................................................................................. 4
3 Connection Overview and DIP Switches .......................................................................................... 6
4 Location of LEDs .............................................................................................................................. 7
5 Connection diagram ........................................................................................................................ 8
5.1 Main connector ....................................................................................................................................... 8
5.2 8-pin and 6-pin interface connectors ...................................................................................................... 9
5.3 External GNSS antenna connector ...................................................................................................... 10
5.4 External WLAN antenna connector ...................................................................................................... 10
5.5 External GSM antenna connector ........................................................................................................ 10
5.6 USB 2.0 OTG connector ....................................................................................................................... 10
6 General Safety Notes ..................................................................................................................... 11
7 Installation Requirements ............................................................................................................. 13
8 Required FLEX CM Telematics Unit connections ........................................................................... 14
9 FLEX CM Telematics Unit installation locations ............................................................................ 14
10 Installation Position ................................................................................................................... 15
11 Installing the FLEX CM Telematics Unit ..................................................................................... 16
12 Setting the termination resistance ............................................................................................ 17
13 GNSS recording .......................................................................................................................... 18
14 Technical data and requirements .............................................................................................. 19
Anton Kolar
Continental Automotive G mbH
29.06.2017
I CVAM RD TTS SY1
Installation Instruction
Dr. M.Grüner
ICVAMTTSLRH
Installation Instructions
Designed b
Date
Department
Released by
Date Department
Designation
Document
Version Pages
4/ 19
Delivery Content
FLEX CM Telematicss Unit
Connection cable (optional)
GNSS antenna (optional)
Installation Instruction
Delivery content and general note
2
_________________________________________________________
Note: Please be aware, the installation location of the device has to be in
a minimum distance of 20cm of the head of a human.
_________________________________________________________
_________________________________________________________
Note:
FCC compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
_________________________________________________________
_________________________________________________________
Note:
Non-modification warning statement
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
_________________________________________________________
Anton Kolar
Continental Automotive G mbH
29.06.2017
I CVAM RD TTS SY1
Installation Instruction
Dr. M.Grüner
ICVAMTTSLRH
Installation Instructions
Designed b
Date
Department
Released by
Date Department
Designation
Document
Version Pages
5/ 19
Note:
Usage of antennas
Do NOT substitute any antenna for the one supplied by or recommended
by the manufacturer. Substituting an antenna may expose a person or
persons to harmful radio frequency radiation. Contact the manufacturer
for further instructions.
_______________________________________________________
Anton Kolar
Continental Automotive G mbH
29.06.2017
I CVAM RD TTS SY1
Installation Instruction
Dr. M.Grüner
ICVAMTTSLRH
Installation Instructions
Designed b
Date
Department
Released by
Date Department
Designation
Document
Version Pages
6/ 19
Item
Designation
1
DIP switches for CAN3 high / low termination setting (OFF / ON)
2
WLAN antenna connect or
3
Mini USB connector
4
Main connector (i.e. to connect a DTCO® 1381)
5
GPS antenna connector
6
GSM antenna connector
7
8-pin interface connector
8
Micro SIM card
9
6-pin interface connector
3 Connection Overview and DIP Switches
Anton Kolar
Continental Automotive G mbH
29.06.2017
I CVAM RD TTS SY1
Installation Instruction
Dr. M.Grüner
ICVAMTTSLRH
Loading...