Th ank you for pur chasi ng this prod uct,
ple ase read the manu al carefu lly before
operating, and reserve it for future reference.
Precaution
USE only in a 12-volt negativ e- ground
electrical system according to the right radio
variant. (Refer to variants table)
Disconnect the vehicle's negative battery
terminal while mounting and connecting
the unit.
When replacing the fuse, be sure to use one
with an identical amperage rating.
Usin g a fuse with a higher amperage rating
may cause serious damage to the unit.
Make su re that p ins or obst acles do not get
inside the unit, they may cause malfunctions,
or create safety hazards such as electrical
shock.
If you have parked the v ehicle for a lon g
time in hot or cold weather, wait until the
temperature in the vehicle becomes normal
before operating the unit.
Before operation
Do not raise the volume level too high. Keep
the volume at a level at which you can hear
outside warning sounds (horns sirens, etc.).
Stop the vehicle before performing any
complicated operations.
Caution
Do not open the cover and do not repair by
yourself. Ask your authorised dealer for help.
Note:
1 According to models with different wiring
ha rness to conn ec t the de finit io n of the
specific content, please refer to the model
label.
2 Specifications and the design are subject to
change without notice due to improvements in
technology.
Safety Information .................... .................... 2
Panel Controls
General Operation
Volume and Sound ........................................ 4
AM/FM Radio …............................................. 5
Continental Trading AG declares the radio has
been so constructed that it complies with basic
requirements and other relevant regulations of
the European Union directives 2014/53/EU.
You can find the declaration of conformity on our
website www.continental-automotive,com
(11) MP3 folder back
Phone: Contact mode/Dial/Private
mode
(12) MP3 Random play
(13) MP3 repeat play
(14) Program intro Play (Scan)
(15) MP3/Bluetooth Play/Pause
(16) Front auxiliary input
4
General Operation
Power ON/OFF , Mute
To Switch on the Radio push the Power ON/OFF
button.
To switch off the Radio push the Power ON/OFF
button for more than 2 sec.
The Radio will be muted by pushing the Power
ON/OFF button for less that 2 sec.
Ignition Logic
With ignition logic activated (Default setting) the
Radio can be switched on and off manually even if
the vehicles ignition pin is not connected. To avoid
battery discharge the radio is switched off after 1h
without user operation.
System Settings
The system settings menu is entered by long
pressing the [DISP] button. To access the available
menu entries push the search buttons [ << />> ]. To
select the available options of each menu entry
rotate the [VOL] knob.
For details see chapter system settings of this
manual.
Select Source
Press the [SRC] button to switch between and
select available sources: TUNER->USB->AUX>Bluetooth->DAB. USB and Bluetooth is only
visible in the menu when connected.
Reception Area
This Radio is designed to work in different regions
with different frequency ranges.
The Reception area can be adjusted via the System
Settings menu. The default setting is “EUROPE”.
The following Areas are available:
EUROPE/ASIA/JAPAN/NORTH AFRICA/USA
Clock Setting
The clock time can be adjust manually by long
pressing the [DISP] button to set the time.
Select [CLOCK] with the search buttons [ << />> ].
Press [SEL] button and rotate [VOL] knob to adjust
the minutes.
Press search buttons [ << />> ] to select adjust
hours. Rotate [VOL] knob to adjust the hours.
Press the [SEL] button to exit the clock setting.
Volume and Sound
Volume
To adjust the Volume rotate the [VOL] knob
Predefined sound effects
The Radio provides different predefined sound
effects .
Press the [SEL] button to enter the Sound settings
menu. Rotate the [VOL] knob to select one of the
following options: EQ OFF -> POP
-> ROCK -> CLASSIC -> JAZZ -> CUSTOM.
BALANCE, FADE/SUB and Loudness
To adjust Balance, Fader and Loudness press the
[SEL] button and then push [ << / >> ] button to
select BALANCE -> FADER/SUB GAIN -> LOUDNESS.
Rotate the [VOL] knob to adjust Balance, Fade and
Loudness according your needs.
Fader is replaced by SUB Gain to adjust the
subwoofer gain when the Subwoofer is activated.
Manual Sound Adjustment
For manual sound adjustment first select CUSTOM.
Push the [SEL] button again and then select BASS or
TREBLE with the [ << / >> ] button. Rotate the [VOL]
knob to adjust BASS and TREBLE according your
needs.
AM/FM Radio
AM/FM Radio Selection
To access AM/FM Radio press the [SRC] button
and select Tuner
Select Band
Press the [ BAND ] Button to select one of the
available Radio Bands. The Radio bands will be
changed in the following order:
FM1 -> FM2 -> FM3 -> MW1 -> MW2 -> LW (for
Europe region)
FM1 -> FM2 -> FM3 -> AM1 -> AM2 ( for US region)
The MW(AM) and LW Bands can be deactivated by
the user via the system settings menu.
Automatic Tuning
For Automatic tuning press the [ << / >> ] button.
The Radio will search and select the next receivable
station.
When Traffic Announcement is activated (“TA =
ON”) only stations that broadcast Traffic
announcements will be tuned.
Manual Tuning
For manual station selection press the [ << / >> ]
button for longer than 2 sec. “MANUAL” is shown in
the display. Pressing the [ << / >> ] button again the
frequency will be incrementally
increased/decreased.
Manual Storing Favourites
There are 18 FM , 12 MW and 6 LW Favourite
presets available.
Select the favourite bank where to store the station
and tune the station that shall be stored.
Push the preset button longer than 2 sec .to store
the station
Recall Stored Favourites
To recall a stored favourite push the according
preset button
Auto Memory Store
To search for the best receivable stations and store
them as favourite press the (BAND/AST] button for
2 sec. The Radio searches the best receivable station
and stores them.
5
RDS
Many FM Stations in Europe transmit RDS data
(Radio Data System) in addition to their audio
program. With RDS the user has the following
benefits:
The best audible frequency (AF) of a selected
station is tuned automatically for best reception
quality.
To enable automatic selection of best audible
frequency select “AF=ON” in the Settings menu
The Radio recognizes Traffic Announcements
and can switch to Radio even if an other Audio
source is selected.
To enable automatic Traffic announcement select
“TA=ON” in the Settings menu
Some Stations provide regional specific programs.
With the regional (REG) function only those
frequencies are followed that broadcast the
selected regional program. To follow regional
programs select “REG=ON” in the Settings menu
The stations name can be displayed
For further settings see System Menu
PTY
Via the RDS System FM stations in many countries
transmit the type of program (Program Type , PTY)
that is broadcasted.
To search for a desired Program type push [SRC] for
about 2 sec. and select the Program type by rotating
the[VOL] knob.
The Radio will search for a Radio-Program with the
selected Program type when the [SEL] button is
pushed. “PTY SEEK” is shown in the Display.
If no station with the selected Program Type can be
found the last tuned station will be selected and
“NO PTY” is shown in the Display.
The following program types are available:
NEWS, AFFAIRS, I NFO, SPOR T, EDUCATE ,
DRAMA, CULTURE, SCIENCE, VARIED, POP-M,
ROCK-M, EA SY-M, LIGHT-M, CLASSICS- M ,
O TH E R-M , W E A T H E R, FI N AN C E , CHILDREN,
SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE,
JAZZ, COUNTRY, NATIONAL-M, OLDI ES, F OLK- M ,
DOC UME NT, T EST, ALARM
DAB Radio
*
DAB Radio Selection
DAB/DAB+ Provides radio programs in digital
sound quality.
To access Digital Audio Broadcast (DAB) press the
[SRC] button and select DAB.
DAB Service SCAN
To search for receivable DAB Services the DAB
service SCAN has to be started by pushing
*BAND/AST+ for 2 sec. “SCAN” is shown in the
display.
Tuning a DAB Service
To tune a DAB service push [<< / >> ] to select the
next/previous DAB service. “Tuning” is shown on
the Display.
Storing DAB Favourites
There are 3 DAB favourite bands available.
Press the [ BAND ] Button to select one of
the available DAB Bands. The DAB bands
will be changed in the following order:
DAB1 -> DAB2 -> DAB3
Push the preset button longer than 2 sec
.to store the station
6
Recall Stored Favourites
To recall a stored favourite push the according
preset button
DAB Service List
To get an overview of receivable DAB services a
DAB Service List can be displayed.
Push [SEL] for 2 sec. to open the DAB Service List.
Rotate the [VOL] Button to scroll through the list
of receivable stations.
To tune a DAB service push *SEL+. “Tuning” is
shown on the display.
In the case that a Service is temporary not
receivable “No Service” will be shown on the
display.
Switching between DAB and FM
When the DAB signal quality drops significant
it is reasonable to switch and listen to the
service via FM.
Switching between DAB and FM (DABFMLNK)
can be disabled via the system settings menu
(applicable to DAB feature)
USB/MP3/WMA
Note on MP3
•MP3 is short for MPEG Audio Layer 3 and refers
to an audio compression technology standard.
•This product allows playback of MP3 files.
•The unit can not read an MP3 file that has a file
extension other than ".mp3".
•If you play a non-MP3 file that has the “.mp3"
extension, you may hear some noise.
•In this manual, we refer to what are called "MP3
file" and "folder " in PC terminology as "track" and
"Album," respectively.
•Maximum number of directory and files is 65535,
including the root directory. Maximum number of
files per folder is 1000.
•The unit may not play tracks in the order of Track
numbers.
•Supports bit rate from 8 to 320 kbps and VBR
(Variable Bit Rate).
Note on WMA
Supports bit rate from 5 to 384 kbps and VBR
(Variable Bit Rate).
Supports WMA-TAG
USB Notes
USB functions (flash memory type) MP3 musicplay.
• USB flash memory 2 in 1 support
• FAT 12/FAT 16/FAT 32 format supported.
• Supports MPEG audio 1, 2, 2.5
• Supports Layer 1, 2, 3.
• Supports ID3 Tag (V1.0, V1.1, V2.2, V2.3, V2.4)
- title/artist/album
• USB 1.1 support, USB 2.0 support
(For 2.0, speed performance is as USB 1.1)
• Not all USB devices are compatible with the unit.
• USB connector is support maximum work power
with 2100 mA.
Loading/ Removal of USB Device
Insert a USB device into the USB-slot “Reading” is
shown on the Display. MP3 Playback will start
immediate afterwards.
Before removing the USB Device switch to an
other Source by pushing the [SRC] button.
7
MP3 Playback/Pause
To pause and resume MP3 Playback push button
[1>].
Next/Previous MP3 Track.
To select the next/previous track push the [<</>>]
button.
Fast forward/fast rewind.
To fast forward/fast rewind the current track push
the [<</>>] button longer than 2 sec.
Random Play
To activate random play push the button [4 RND].
Repeat
Push the [3 RPT] button to activate repeat
Track/repeat directory/repeat all.
SCAN
To activate/stop the scan function push the button
[2 SCN]. In scan mode all titles are played for 10
sec.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.