Continental Automotive 5WY8201 2 3 User Manual

Siemens VDO Automotive AG SV C ER

FCC ID:KR55WY8201-2-3

User Manual / Functional Description

of the

Siemens VDO

TX Transmitter

type 5WY 8201-2-3-4-5-6

File: S:\Postzula\Dwmc\Func_TX_Dwmc.doc Page 1 of 4

Siemens VDO Automotive AG SV C ER

FCC ID:KR55WY8201-2-3

General description of the RF transmitter

The RF remote control system consists of a RF transmitter and a RF receiver
mounted within the control unit. The RF transmitter is mechanically integrated
in the head of the key. This transmitter is used to transmit an information for
locking or unlocking the vehicle by an unidirectional RF transmission line for
normal remote operation by pressing a button.

In general the following functions are provided:

- Lock the car

- Unlock the car

- Unlock trunk

Power supply

The transmitter is provided with 1 Lithium battery (CR 1616) that gives a
tension of feeding of +3V.
The battery inversion is protected mechanically .

Buttons

There are two buttons which enable to lock, unlock the doors and unlock the
trunk. During activation, the button is forced to the ground via a “pull-up”
within the microcontroller.

LED

The LED is turned on between transmission blocks.

Variants

Siemens type designation frequency difference

5WY 8201 315 MHz without transponder
5WY 8202 315 MHz with transponder-master

5WY 8203 315 MHz with transponder-non master
5WY 8204 433 MHz without transponder
5WY 8205 433 MHz without transponder
5WY 8206 433 MHz with transponder-non master

All variants have the same schematic, pcb and layout. The
only difference is the transponder usage.

File: S:\Postzula\Dwmc\Func_TX_Dwmc.doc Page 2 of 4