Siemens AG
Siemens VDO Automotive SV I IC PE RF Design
IC: 267T-5WK49308 FCC ID:KR55WK49308
User Manual
of the
Siemens VDO
Radio Frequency Transmitter
Type
5wk4 9308
5wk4 9309
5wk4 9348
5wk4 9349
5wk4 9542
I:\POSTZULA\Honda\Tx\Technische_Doku_doc\Func_Description_Honda-Tx-Transmitter_v1.doc Page 1 of 6
Siemens AG
Siemens VDO Automotive SV I IC PE RF Design
IC: 267T-5WK49308 FCC ID:KR55WK49308
1. GENERAL DESCRIPTION OF THE RF TRANSMITTER
The RF remote control system consists of a RF transmitter and a RF receiver
mounted within the control unit. The RF transmitter is mechanically integrated
in the head of the key. This transmitter is used to transmit information for
locking or unlocking the vehicle by a unidirectional RF transmission line for
normal remote operation by pressing a button.
In general the following functions are provided:
- Lock the car
- Unlock the car
- Unlock the trunk of the car
- Panic Alarm
Immobilizer Transponder
When the key is operating as an immobilizer transponder, communication is
done over a "contact less interface" depending on strong magnetic coupling.
The transponder is the passive side of the link and there is no RF
transmission from it involved in any aspect.
SW1
SW2
SW3
SW4
I:\POSTZULA\Honda\Tx\Technische_Doku_doc\Func_Description_Honda-Tx-Transmitter_v1.doc Page 2 of 6