Continental Automotive 5WK49167 Users manual

SIEMENS VDO Automotive SV C BC P2 RF
IC:267T-5WK49167 FCC ID:KR55WK49167
User Manual / Functional Description
of the
Siemens VDO
Keyless Vehicle Module
Type
5WK4 9167
Page 1 of 5
SIEMENS VDO Automotive SV C BC P2 RF
IC:267T-5WK49167 FCC ID:KR55WK49167
1. SYSTEM OVERVIEW
This short system description gives an overview about the functionality of the Keyless Vehicle (KV) system and from the Keyless Vehicle Module (KVM).
The vehicle and the Passive Key (PK) will communicate via challenge / response. By any request the KVM sends a challenge via the respective LF-antennas with 125 KHz to the Passive Key. The PK’s within the detection range answer via Radio Frequency (RF) transmission. The external RF-Receiver sends the data from the received signal via serial link to the KVM. The system will provide a specific PK detection function for inside and outside detection range.
Different failure modes and diagnostic data will be displayed to the driver from KVM via the Mid Speed CAN-Bus to display at the cluster.
For back up reasons, the Passive Key will provide a metal key blade for locking / unlocking the vehicle and for starting the engine after key is inserted in ignition switch (ignition key cylinder) and turned to crank position.
Page 2 of 5
Loading...
+ 3 hidden pages