Continental KEYFOB User Manual

The device under test is manufactured by the grantee (Continental Corporation) and sold as an
OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure
the end-user has all applicable / appropriate operating instructions. When end-user instructions
are required, as in the case of this product, the grantee must notify the OEM to notify the end­user.

Continental Corporation will supply this document to the reseller/distributor dictating what
must be included in the end user's manual for the commercial product.

INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL

The following information (in blue) must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must
be included in the manual if the device label is not readily accessible to the end user. The
compliance paragraphs below must be included in the user's manual.

******************************************************************************

MODEL/FCC ID: M3NKEYFOB
IC: 7812A-KEYFOB

This device complies with Part 15 of the FCC Rules and with Industry Canada’s licence­exempt RSSs. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.

Cet appareil est conforme aux CNR d’Industrie Canada a applicables aux appareils radio
exempts de licence. L’exploitation est autorisée à condition que l'appareil ne
produise pas de brouillage préjudiciable et qu'il accepte tout brouillage, même celui
susceptible d'en compromettre le fonctionnement.

Note: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.