Continental DL2WI-SS-E, DL1WI-SS-E, DL3WI-SS-E User Manual
ROLL-IN WARMERS
90° TO 180° RANGE
EXTENDED HEIGHT
(72" CART CAPACITY)
WARMERS
Models Available
•Consult Factory
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
DDLL11WWII--SSSS--EE
DDLL22WWII--SSSS--EE
DDLL33WWII--SSSS--EE
Heating System-(Range 90°F to 180°F)
Electrically operated heating system is controlled by means of a highly sensitive calibrated thermostat mounted on the cabinet front.
Fin strip heating elements are located at the
base of the interior. Air circulating blower
located in a top mounted, concealed “plug”
housing distributes heat throughout product
zone, assuring uniform cabinet temperatures.
Cabinet top has a built-in humidity relief vent.
The entire “plug” system is mounted on a sturdy steel, rail-type base which can be easily
removed if refrigerator or freezer conversion is
desired. A strict quality assurance team
inspects all material and components to certify that each model conforms to the most
exacting standards. All models are factory
performance tested for a minimum of 16 hours
prior to crating.
Cabinet Construction
All materials are of top quality, assembled to
conform with strict quality-assurance requirements. The cabinet front and doors are constructed of heavy-gauge polished stainless
steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all
metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminates overlapping panels
with raw edges. Cabinet body and doors are
insulated with non-CFC, foamed-in-place
polyurethane foam with an average thickness
of 3 inches to ensure increased energy efficiency. Automatic interior lighting is controlled
by door openings. Cabinets are equipped with
an easily removable, stainless steel ramp and
interior rack guides.
Door Construction
Door shells are constructed of heavy-gauge
stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners are of welded construction and polished.
Door gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are
provided with built-in cylinder locks which are
keyed alike. Hinges are cam action, lift-off
type featuring positive safety stop at 120
degrees.
Standard Features
• Modern, State-of-the-Art Styling
• Top Mounted Heating Plenum “Plug” Design with
Circulating Fans for Uniform Temperature
Distribution
• Humidity Relief Vent
•27
3
/8" Wide, 721/2" High Door Openings
• 3" Non-CFC Polyurethane Foam Insulation
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Automatic Interior Lighting
• Cylinder Lock In Each Door
• Exterior Thermostat Control with master
On/Off Control Switch
• Removable Stainless Steel Ramps
• Magnetic Snap-In Door Gasket
• Exterior Digital Thermometer
• Removable Stainless Steel Rack Guides
DLWIE1106
WARMERS
A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
(800) 523-7138 Fax: (215) 244-9579
www.continentalrefrigerator.com
DL1WI-SS-E DL2WI-SS-E DL3WI-SS-E
CHARACTERISTICS
Roll-In Roll-In Roll-In
DIMENSIONAL DATA
Net Capacity (cu. ft.) 34 68 102
Width, Overall (in.) 35
1
/
4
681/
2
1013/
4
Depth, Overall (Incl. Hdls.) (in.) 351/2 351/2 351/
2
Depth (Less Door(s)) (in.) 32 32 32
Depth (Doors(s) Open 90°) (in.) 65 65 65
Clear Door Width (in.) 27
3
/
8
273/
8
273/
8
Clear Full-Door Height (in.) 721/
2
721/
2
721/
2
Height, Overall (in.) 92 92 92
No. of Full Door(s) 1 2 3
Rack Capacity* 1 2 3
ELECTRICAL DATA
Cabinet Specifications
115/208-230/60/1 115/208-230/60/1 115/208-230/60/1
Feed Wires (Incl. Ground) 4 4 4
Total Amperes 7.8 14.5 22.4
Total Wattage @ 208-230 Volts 1500 3000 4500
Power Supply Cord no no no
SHIPPING DATA
Height – crated (in.) 94 94 94
Width – crated (in.) 43 77 109
Depth – crated (in.) 42 42 42
Volume – crated (cu.ft.) 98 176 249
Weight Std – crated (lbs.) 415 680 840
Weight SS – crated (lbs.) 505 720 925
Weight Std – uncrated (lbs.) 330 540 670
Weight SS – uncrated (lbs.) 405 575 740
*Maximum Rack Size including wheels - 27"W x 29"D x 72"H
Note: All Specifications subject to change without notice
SIDE VIEW
DL2WI-E
DL3WI-E
DL1WI-E
687/8"
273/8"
28"
273/8
"
28"
273/8"
1013/4"
273/
8"
273/8"
273/8''
28''
351/4
''
291/
4''
323/8''
761/2''
92''
6''
Loading...