Continental CP49518 User Manual

INSTRUCTION MANUAL



18” HIGH VELOCITY FLOOR FAN

MODEL:

CP49518

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

18” High VELOCITY FLOOR FAN

OPERATING INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

CAUTION: Read and follow all instructions before Operating Fan. Do not use fan

if any part is damaged or missing.

WARNING: To reduce the risk of re or electrical shock, do not expose to water

or rain.

To reduce the risk of re or electrical shock, do not use this fan with any solid state

speed control device.

RULES FOR SAFE OPERATION:

1. Never insert ngers or any other objects through the grille guard when fan is

operation.

2. Disconnect the fan when moving from one location to another.

3. Disconnect the fan when removing guards for cleaning.

4. Be sure fan is on a stable, at surface when in operation.

5. DO NOT use fan in windows. Rain and moisture may create electrical hazard.

6. If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualied persons in order to avoid a hazard.

7. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.

8. Children should be supervised to ensure that they do not play with the
appliance.

CLEANING
WARNING: Unplug from electrical supply source before cleaning.

- Use soft damp cloth to clean. Then wipe with dry cloth.

- Do not use a cleaning solution that is harmful to paints or plastics.

- Do not bend the blades.

- The motor bearings are permanently sealed and do not require additional
lubrication.

ASSEMBLY THE FAN

BEFORE ASSEMBLING UNIT:
Read these instructions carefully and familiarize your self with the procedure before
assembling the unit.
Check that you have all the component parts following the content list and familiarize
yourself with each part before proceeding.
Ensure you have enough space to lay out all the parts before assembly.