Continental 284074 User Manual

The device under test is manufactured by the grantee (Continental Automotive Systems US Inc.), and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user.
Continental Automotive Systems US Inc. will supply this document to the reseller/distributor dictating what must be included in the end user’s manual for the co mmercial product.
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual.
******************************************************************************
FCC ID: M3N284074 IC: 7812A-284074
This device complies with Part 15 of the FCC Rules and with Industry Canada’s licence-exempt RSSs. Operation is subject to the follow ing two condi tions:
1. This device may not cause har mful in terference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation es t auto risée aux deux c onditions suivan tes :
1. L’appareil ne doit pas p rodui re de b rouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonc tionnement.
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to ope rate the equip ment.
******************************************************************************
Loading...