Contec Medical Systems CONTEC08A BT Users manual

Foreword

Please read the User Manual carefully before using this product. The User Manual which describes the operating procedures should be followed strictly. This manual detailed

introduce the steps must be noted when using the product, operation which may result in

abnormal, the risk may cause personal injury and product damage and other contents, refer to the

chapters for details. Any anomalies or personal injury and device damage arising from use,

maintain, store do not follow requirements of the User Manual, Our company is not responsible

for the safety, reliability and performance guarantees! The manufacturer’s warranty service does

not cover such faults!

Note: Please read the User Manual carefully before using this product.

Described in this User Manual is in accordance with practical situation of the product. In case of

modifications and software upgrades, the information contained in this document is subject to

change without notice.

The warning items

Before using this product, you should consider the safety and efficacy of the following described:

 The safety classification of this product is class Ⅱ equipment, type BF.  Described each measurement results combined with clinical symptoms by qualified doctors.  The reliability and operation of using this product whether meets the operation of this

manual relate to the maintenance instructions.

Warning: Replace accessories which not provided by our company may lead to the

occurrence of errors.Without our company or other approved maintenance organizations trained service personnel should not try to maintain the product.

Responsibility of operator

 The operator must carefully read the User Manual before use this product, and strictly

follow the operating procedure of the User Manual

 Fully consider the security requirements during product design, but the operator should not

ignore the observation for the patient and the state of machine.

 The operator has the responsibility to provide the use condition of the product to our

company.

Responsibility for our company

 Our company have the responsibility to provide qualified product which conform to

company standard of this product.

 Our company have the responsibility to complete product installation, debugging and

technical training according to the contract.

 Our company have the responsibility to complete product maintenance according to the

contract.

 Our company have the responsibility to respond the requirements of user in time.

Contents

Chapter1 Functions and Purpose ............................................................................................. 1

Chapter2 Safety Precautions ................................................................................................... 2

2.1 Operation about AC Adapter ..................................................................................... 3

2.2 Operation about Batteries .......................................................................................... 4

Chapter3 Main Unit ................................................................................................................ 5

Chapter4 External Interfaces ................................................................................................... 7

Chapter5 Dry Battery/AC Adapter Installation ....................................................................... 8

5.1 Dry Battery Installation ............................................................................................. 8

5.2 Using the AC adapter ................................................................................................ 8

Chapter6 Button Functions ................................................................................................... 10

Chapter7 Set Date and Time ................................................................................................. 11

Chapter8 Unit and Language ................................................................................................ 13

8.1 Measurement Unit ................................................................................................... 13

8.2 Language ................................................................................................................. 13

Chapter9 Alarm Function ........................................................................................................ 1

9.1 Physiological Alarm .................................................................................................. 1

9.2 Technical Alarm ........................................................................................................ 1

Chapter10 Measurement Mode ............................................................................................... 2

Chapter11 Application of the Sphygmomanometer ................................................................ 3

11.1 Accurate Measurement Way .................................................................................... 3

11.2 Applying the Cuff .................................................................................................... 3

11.3 BP Measurement ..................................................................................................... 4

Chapter12 Memory Fuction .................................................................................................... 6

12.1 Read Memory Values .............................................................................................. 6

12.2 Delete Memory Values ............................................................................................ 7

Chapter13 Bluetooth Data Sending ......................................................................................... 8

Chapter14 SpO Chapter15 SpO

Chapter16 Maintenance, Cleaning and Keeping ................................................................... 12

Chapter17 Error Message ...................................................................................................... 14

Chapter18 Troubleshooting ................................................................................................... 15

Chapter19 Meanings of Symbols .......................................................................................... 16

Chapter20 Specification ........................................................................................................ 17

Measurement Function ................................................................................. 9

Measurement Method ................................................................................. 11

Chapter1 Functions and Purpose

Description of functions: The Sphygmomanometer apply to measure the non-invasive blood pressure of human (adult,

pediatrics, neonate), each user can store 100 items records of measurement results at most. Each

record includes detailed measuring time, systolic pressure, diastolic pressure, average pressure,

pulse rate and record number, etc. With 2.8 inch color LCD screen, clear interface, the function

of data review is complete. User can implement ON/OFF, manual measuring, system setup,

parameters change and other operations with seven buttons which are located on the front panel

of the device. The device uses audible and visual alarm, when the battery power is low, the

buzzer will intermittent buzzing and LCD screen displays "Low Power" to prompt user replace

batteries. When the measurement data exceeds the set alarm limit, the font color of measurement

results will change to red and the audible alarm will occur, user can open and close the alarm

sound according to needs. Users can send measurement results which be automatically saved by

device to mobile phone with bluetooth transmission function. Refer to the help or explication of

the related software for specific operation.

Purpose:

The device apply to measure the non-invasive blood pressure and SpO

(optional) of human.

Record parameter value of blood pressure to provide the reference for the health care

professional

Chapter2 Safety Precautions

●Before use, carefully read the "Safety Precautions" for a correct use.

●To prevent users suffered hurt or damnification due to improper use,see "Safety

Precautions",and use this product properly.

For safety reasons, be sure to comply with safety precautions.

Note

If not to use correctly, it exists that a potentially hazardous situation which may result in

injury to the user or patient or damage to the equipment or other property.

Note

Human and the surrounding environment are in the range of electromagnetic radiation

which generated by this device,there is no energy hazard to human or the surrounding

environment, also not affected by the electromagnetic interference of the external device.

This device has slight energy radiation,should be avoided too close to the high precision

uirements equi

ment.

Note

Self-diagnosis and treatment using measured results may be dangerous.Follow

the instructions of your physician.

Please hand measurement results to the doctor who know your health to accept

diagnosis.

For severe blood circulation disorder or arrhythmia patients, please use the

device under the guidance of a doctor.

Otherwise it may lead to acute hemorrhage, or measurement error as a result of squeezed

arm.

Infant and the person who can't express oneself can't use the device

Otherwise it may cause accident or dissension

Please do not use for any other purpose.

Otherwise it may cause accident or holdback.

Please use special cuff.

Otherwise it is possible that measurement result is incorrect.

Please do not keep the cuff in the over-inflated state for a long time

Otherwise it may cause risk

Do not disassemble,repair and change the device

Otherwise it can not measure correctly

2.1 Operation about AC Adapter

Note Please use the dedicated AC adapter of this device. Otherwise it may cause trouble.

Dedicated AC adapter must use AC 100V~220V.

Otherwise it may cause fire or electric shock.

When there is breakage of dedicated AC adapter plug or wire,please do not use it.

Otherwise it may cause fire or electric shock.

Please do not plug or unplug the adapter on the socket with wet hands

Otherwise it may cause electric shock or injury.

2.2 Operation about Batteries

Note

Please use 4 "AA" manganese or alkaline batteries, do not use batteries of other

types.

Otherwise it may cause fire.

New and old batteries, different kinds batteries can not be confusion.

Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic

Sphygmomanometer.

Please don't put wrong the positive and negative of battery. When the batteries

power exhausts, replace with four new batteries at the same time.

Please take out the dry batteries when you do not use the device for a long time.

Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic

Sphygmomanometer.

If electrolyte of the batteries immodestly get in your eyes, immediately rinse with

plenty of clean water.

It will cause blindness or other hazards,Should immediately go to the nearest hospital

for treatment

If electrolyte of the batteries immodestly glues on the skin or the clothes,

immediately rinse with plenty of clean water.

Otherwise it ma

hurt the skin.

Advice

Do not subject the device to strong shocks, such as dropping the unit on the floor;

Do not inflate before the cuff wrapps around the arm;

Do not inflect the cuff and the air tube forcibly.

Cuff Plug

Cuff Air Plu

Chapter3 Main Unit

Displa

Up/Down button

Memory button

AC adapter socket

Menu button

On /Off button

Start /stop button

USB socket

Accessories:

Adult Cuff Dry Battery

(Cuff specification: limb circumference 22-32cm (middle part of upper arm))

User Manual

Optional Accessories:

AC adapter

Input: voltage: AC 100V~220V

frequency: 50Hz/60Hz

Rated current:AC 150mA

Output: DC 6.0V±0.2V 1.0A

or DC5.0V±0.2V 1.0A

SpO2 Probe: Y10UCH150

A. SpO2 measurement

Range:0%~100%

Error: 70~100%:±2%;Below 70%:unspecified

B. Pulse rate measurement

Range:30bpm~250bpm

Error: ±2bpm or ±2%(select the larger)

C. Optical sensor: red light(wavelength: 660nm,

6.65mW) infrared light(wavelength: 880nm, 6.75mW)

Chapter4 External Interfaces

Note

Please hold the air plug to remove the NIBP cuff.

①Cuff Socket

Left side

The right side of the device is USB socket and AC adapter socket

USB socket

AC adapter socket

Right side

Note

The cuff socket and AC adapter socket of the sphygmomanometer only connect to the stated equipment which accord with the requirements of IEC 60601-1: 1988 “Medical electrical equipment-Part 1: General requirements for safety”.

①③②

Chapter5 Dry Battery/AC Adapter Installation

This product can use dry batteries as well as AC adapter.

5.1 Dry Battery Installation

① Demount the battery cover in the direction of the arrow.

② Install "AA" dry batteries according to

③ Slide to close the battery cover.

“ ” : the batteries power will exhaust. Replace with four new batteries (the same

Icon

sort) at the same time. Test while low power may cause data deviation and other problems.

Turn the unit off before replacing the batteries.

polarities.

Note

Dispose of the batteries according to applicable local regulations about environmental.

5.2 Using the AC adapter

① Connect sphygmomanometer and the AC adapter. Insert the AC Adapter Plug into the

AC Adapter socket on the right side of the device.

② Please insert the power plug of AC adapter into the AC 100V～240V socket.

Note

When cut off the power, first cut off the connection of power socket and the regulated power supply, then cut off the connection of regulated power supply and the sphygmomanometer. Please be sure to use dedicated AC adapter.

Note

When regulated power supply and dry batteries are both used at the same time, the dry

+ 23 hidden pages

Contec Medical Systems CONTEC08A BT Users manual

Specifications and Main Features

Frequently Asked Questions

User Manual