How it Works
Contec
Loading...
SPI-8451-LVA
User Manual
10 pgs1.23 Mb0
Table of contents
Loading...

Contec SPI-8452-LLVA, SPI-8451-LVA, SPI-8451-LLVA User Manual

Download
SBC Series
Single Board Computer Full Size PICMG with LANx2, VGA, Audio
SPI-8451-LLVA SPI-8452-LLVA
SPI-8451-LVA
User’s Manual
CONTEC CO.,LTD.

Check Your Package

Thank you for purchasing the CONTEC product.
The product consists of the items listed below. Check, with the following list, that your package is complete. If you discover damaged or missing items,
contact your retailer. Product Configuration List
- Board (One of the following) [SPI-8451-LLVA/-LVA or SPI-8452-LLVA] …1
- Product Guide …1
- IPC Precaution List …1
- CD-ROM (Driver disk utilities) …1 * 1
- IDE 80 pin Ribbon Cable …1
- IDE 40 pin Ribbon Cable …1
- FDD Ribbon Cable … 1
- 2 serial Ports (9 pin D-SUB male x 2) ribbon cable (with bracket) …1
- Parallel port (25 pin D-SUB female x 1) ribbon cable (with bracket) …1
- Audio jack cable (with bracket) …1
- 6 pin mini-DIN cable (2 in 1 for PS2 Mouse & Keyboard functions) …1
- DVI - Analog RGB conversion adapter (SPI-8451-LLVA, SPI-8452-LLVA only) …1
- +12V power supply cable …1
- Jumper short pin (2 mm) …5
* 1 The CD-ROM contains the driver software and User’s Manual (this Manual)
Board
Driver disk utility
[CD-ROM]
Product Guide
Product
Guide
2 serial ports (9pin D-SUB
male x 2)
ribbon cable
(with bracket)
IPC Precaution
List
IPC Precaution List
Parallel port
(25pin D-SUB
female x 1)
ribbon cable
(with bracket)
Audio jack
ribbon cable
(with bracket)
Floppy
Ribbon Cable
IDE 80 pin
Ribbon Cable
IDE 40 pin
Ribbon Cable
6 pin mini-DIN cable (2 in 1 for PS2 Mouse
& Keyboard functions)
Jumper
short pin
(2mm)
x 5
DVI-Analog RGB
Convertion Adapter
(SPI-8451-LLVA,
SPI-8452-LLVA only)
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
i

Copyright

Copyright 2007 CONTEC CO., LTD. ALL RIGHTS RESERVED. No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD. CONTEC CO., LTD. makes been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO. LTD. All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD. Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may appear
in this document nor for results obtained by the user as a result of using this product.

Trademarks

Intel, Celeron and Pentium are registered trademarks of Intel Corporation. MS, Microsoft, Windows and Windows NT are trademarks of Microsoft Corporation. Other brand and
product names are trademarks of their respective holder. All Other product names or trademarks are properties of their respective owners.

Caution about Battery

Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the local ordinances or regulations.
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
ii

Table of Contents

Check Your Package ................................................................................................................................i
Copyright.................................................................................................................................................ii
Trademarks ..............................................................................................................................................ii
Caution about Battery..............................................................................................................................ii
Table of Contents....................................................................................................................................iii
1. INTRODUCTION 1
Features............................................................................................................................................. 1
Option List........................................................................................................................................2
Customer Support....................................................................................................................................3
Web Site ...........................................................................................................................................3
Limited One Year warranty.....................................................................................................................3
How to Obtain Service ............................................................................................................................3
Liability....................................................................................................................................................3
Safety Precautions ...................................................................................................................................3
Safety Information............................................................................................................................4
Handling Precautions........................................................................................................................4
Environments....................................................................................................................................5
Inspection..........................................................................................................................................5
Storage.............................................................................................................................................. 5
Disposal ............................................................................................................................................5
2. SYSTEM REFERENCE 7
Specification ............................................................................................................................................7
Power Requirements..............................................................................................................................11
Power Consumption .......................................................................................................................11
Connector & Jumper Location ..............................................................................................................12
Block Diagram.......................................................................................................................................13
3. HARDWARE INSTALLATIONS 15
Installation procedure ............................................................................................................................15
CPU Installation: ...................................................................................................................................16
Main Memory Installation: DIMM1, DIMM2...................................................................................... 17
ATX Power Control Connector: CN1................................................................................................... 18
Front Panel Connector: CN2 .................................................................................................................19
Floppy Disk Connector: CN3................................................................................................................20
Primary / Secondary IDE Connector: CN13/CN4 ................................................................................21
Parallel Port Connector: CN5................................................................................................................22
Serial Port connector: CN6, CN7.......................................................................................................... 23
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
iii
RS-422 / RS-485 specifications.............................................................................................................24
IDE RAID Connector: CN14, CN8 (SPI-8451-LLVA only)................................................................25
Audio Connector: CN9 ..........................................................................................................................26
CD-IN Connector: JCDIN .....................................................................................................................26
DVI-I Connector: CN15 ........................................................................................................................27
VGA Connector: CN24 (SPI-8451-LVA only).....................................................................................28
LVDS LCD panel Connector: CN11 / CN12 (SPI-8451-LLVA, SPI-8452-LLVA only) ...................29
LCD Backlight Connector: CN10 (SPI-8451-LLVA, SPI-8452-LLVA only)..................................30
GIGA LAN Connector: CN16 (SPI-8451-LLVA, SPI-8452-LLVA only) ..........................................31
10/100 BASE-TX LAN Connector: CN17............................................................................................31
USB Connector: CN18, CN19, CN20 ...................................................................................................32
External Battery Connector: CN21 (SPI-8451-LVA only)...................................................................32
Keyboard / Mouse Connector: CN22 ....................................................................................................33
EXT. Keyboard Connector: CN23.........................................................................................................33
+12V Power supply Connector: PW1....................................................................................................34
CPU FAN Connector: FAN1.................................................................................................................34
System FAN Connector: FAN2.............................................................................................................34
4. JUMPER SETTING 35
RS-232/422/485 Selector: JP1, JP3.......................................................................................................35
RS-422 Setting.......................................................................................................................................36
RS-485 Setting.......................................................................................................................................37
I/O addresses and instructions ........................................................................................................37
RS-422/485 Terminator: JP2 .................................................................................................................38
Clear CMOS Content: JBAT1 ...............................................................................................................38
5. BOARD RESOURCES 39
System address map...............................................................................................................................39
PCI Routing Information .......................................................................................................................40
6. RAID CONTROLLER 41
Creating Your Disk Array......................................................................................................................43
Creating an Array for Performance ................................................................................................44
Creating a Security Array with new drives ....................................................................................44
Creating a Security Array with An Existing Data Drive................................................................45
Using FastBuild™ Configuration Utility ..............................................................................................46
Viewing the BIOS Screen...............................................................................................................46
Using the Main Menu .....................................................................................................................47
Creating Arrays Automatically.......................................................................................................48
Viewing Drive Assignments...........................................................................................................49
Viewing Array.................................................................................................................................49
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
iv
Deleting an array ............................................................................................................................50
Rebuilding a mirrored Array ..........................................................................................................51
Viewing Controller Settings...........................................................................................................52
Installing the drivers Windows 2000/XP.............................................................................................. 53
Using the FastCheck Monitoring Utility...............................................................................................55
Installing FastCheck....................................................................................................................... 55
Running FastCheck ........................................................................................................................55
Closing FastCheck.......................................................................................................................... 56
Using FastCheck Array Windows.................................................................................................. 57
Viewing Arrayed Drive Information..............................................................................................58
Rebuilding An Array...................................................................................................................... 61
Using Controller Windows.............................................................................................................63
Using Options Windows ................................................................................................................65
7. WATCH-DOG-TIMER (WDT) SETTING 71
8. BIOS SETUP 75
Introduction............................................................................................................................................75
Starting Setup .................................................................................................................................75
Using Setup.....................................................................................................................................76
Getting Help ...................................................................................................................................76
In Case of Problems........................................................................................................................76
A Final Note About Setup..............................................................................................................76
Main Menu.............................................................................................................................................77
Standard CMOS Setup .......................................................................................................................... 79
IDE Adapters.................................................................................................................................. 80
Advanced BIOS Features Setup............................................................................................................ 81
Virus Warning ................................................................................................................................81
Advanced Chipset Features Setup.........................................................................................................85
Integrated Peripherals............................................................................................................................ 89
Power Management Setup.....................................................................................................................95
PnP/PCI Configuration Setup..............................................................................................................100
IRQ n Resources..................................................................................................................................102
PC Health Status..................................................................................................................................103
Frequency / Voltage Control ...............................................................................................................104
Defaults Menu .....................................................................................................................................105
Supervisor/User Password Setting ......................................................................................................105
Exit Selecting....................................................................................................................................... 106
POST Messages...................................................................................................................................106
POST Beep ..........................................................................................................................................106
Error Messages ....................................................................................................................................106
POST Codes.........................................................................................................................................111
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
v
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
vi

1. Introduction

1. Introduction
This product is a full-size PICMG single-board computer that uses the Intel(R) 845GV chipset and can mount a 1.7G - 2.8GHz (FSB400/533MHz) Intel(R) Pentium(R) 4 processor. The board supports a maximum of 2GB DDR SDRAM and features an all-in-one design that incorporates a range of different interfaces.
The SPI-8451-LLVA supports Dual View with two LAN ports (one of which provides GigaBit support) and an LVDS interface. The board also incorporates a RAID controller (PDC2065R from Promise Technology Inc.) for RAID 0 and RAID 1 support.
The SPI-8452-LLVA supports Dual View with two LAN ports (one of which provides GigaBit support) and an LVDS interface.
The SPI-8451-LVA is provided with one LAN port. When connecting external devices or building the system, please read this manual carefully.

Features

[Common]
- The corresponding CPU is as follows : Intel(R) Pentium(R) 4 processor 1.7G - 2.8GHz(FSB400/533MHz), Intel(R) Celeron(R) processor 1.7G - 2.6GHz (FSB400MHz), Intel(R) Celeron(R) D processor 2.26G - 2.8GHz (FSB533MHz)
- Full size CPU board that complies with the PICMG specification and is equipped with a range of
standard interfaces including EIDE, 6 x USB 2.0 ports, audio, serial, parallel, and PS/2.
- Intel(R) 845GV chipset
- Max. 2GB DDR SDRAM
[SPI-8451-LLVA]
- Equipped with DVI-I and LDVS, supports Dual View.
- Incorporates an LVDS interface that can connect directly to an LCD display.
- Incorporates a RAID controller (Promise PDC2065R) that supports both data striping (RAID 0) and data mirroring (RAID 1).
- GIGA bit LAN using Intel 82541 controller
[SPI-8452-LLVA]
- Equipped with DVI-I and LDVS, supports Dual View.
- Incorporates an LVDS interface that can connect directly to an LCD display.
- GIGA bit LAN using Intel 82541 controller
[SPI-8451-LVA]
- Equipped with analog RGB interface
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
1
1. Introduction

Option List

CPU PCP4-28S Pentium 4 2.8GHz CPU with HeatSink-FAN *1 PCP4-28 Pentium 4 2.8 GHz CPU with HeatSink-FAN *2 PCP4-24 Pentium 4 2.4GHz CPU with HeatSink-FAN *2 PCP4C-20S Celeron 2. 0GHz CPU with HeatSink-FAN *1 PCP4C-20 Celeron 2.0GHz CPU with HeatSink-FAN *2
*1 This board requires the width for 2 slots (except CPU heatsink-fan hight). Furthermore, since a heatsink-fan
interferes to board, the next 3 slots can not use full size board (length of 200mm max.).
*2 This board requires the width for 2 slots (except CPU heatsink-fan hight). Furthermore, since a heatsink-fan
interferes to board, the next 2 slots can not use full size board (length of 200mm max.).
Memory PC-MDD256-184A 184-Pin DDR-Memory (PC2700 , 256MB) PC-MDD512-184A 184-Pin DDR-Memory (PC2700 , 512MB)
Cable USB Connector Cable USB Connector shielded cable IDE-66 Cable IDE Ultra ATA 100/66 ribbon cable
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
2
1. Introduction

Customer Support

CONTEC provides the following support services for you to use CONTC products more efficiently and comfortably.

Web Site

Japanese http://www.contec.co.jp/ English http://www.contec.com/ Chinese http://www.contec.com.cn/
atest product information
L CONTEC provides up-to-date information on products. CONTEC also provides product manuals and various technical documents in the PDF. Free download You can download updated driver software and differential files as well as sample programs available in
several languages. Note! For product information Contact your retailer if you have any technical question about a CONTEC product or need its price,
delivery time, or estimate information.

Limited One Year warranty

CONTEC products are warranted by CONTEC CO. LTD. To be free from defects in material and workmanship for up to one year from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the original invoice boards. The warranty is not applicable if the device has been tampered with or damaged through abuse, mistreatment, neglect, or unreasonable use, or original invoice is not included, in which case repairs will be considered beyond the warranty policy.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please obtain a Return Merchandise Authorization Number (RMA) from our Sales Administration Department before returning any product.
* No product will be accepted by CONTEC group without a RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be liable for any incidental or consequential damages due to such defect or consequences that arise from inexperienced usage, misuse, or malfunction of this device.

Safety Precautions

Understand the following definitions and precautions to use the product safely.
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
3
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use