Contec RT-U49C User Manual

To program your TV / VCR combination unit...

1. First, program your remote as a TV Following the steps in this section, find a TV Setup

Code that operates the TV functions of your TV / VCR (power, vol +/ – , mute, ch +/ –

0 – 9).

2. Then, program your remote as a VCR Following the steps in Section 6 for code number

programming, enter, lock and test each 3-digit VCR Setup Code until a code is found that operates the VCR functions of your TV / VCR (play, stop, fast-forward, rewind, pause, record).

Note: You can not

use the Point and Press

Programming method to program the VCR functions of the TV / VCR.

If you have a TV that’s operated by remote control, it is recommended that you plug it directly into a wall outlet instead of the cable set-top terminal.

To program your TV...

1. Turn on your TV.

2. Press [TV], then [SELECT]together - hold both buttons down until [TV]illuminates.

3. a. Press and hold [CH+]until your TV turns off.

As soon as your TV turns off, release [CH+]. OR

b. From the TV Setup Code list, locate and enter

a 3-digit code for your brand. If multiple codes are listed, you may have to enter several codes until your TV turns off.

4. Press [MUTE]. If your TV turns back on, press [TV]

to lock in the code. The [TV]button will blink

and go out. If your TV does not turn back on, repeat steps 3

and 4 until you can turn your TV off and on

❶

Write your TV brand & setup code

Refer to section 16 for code number readback.

❶

Note When using the Point and Press

Programming method (step 3a). If you find a code that turns your TV off but not back on (step 4),you may have gone past the correct matching code. Try pressing [CH–]one

press at a time until you find a

code that turns your TV back on.

1. Introduction

Your CheckMate™ IV (Model RT-U49C) universal remote control is simple to program, easy to use, and can operate up to four

(4) devices, which include:

2. Before Getting Started

Some of the special features and buttons on your remote control are as follows:

Point and Press

Programming

Let’s you program your TV, VCR Audio devices without codes. For more information, see sections 5, 6 and 7.

[

ALL

]

Turns all of your devices on / off with one

button press. [ALL]can even be programmed to automatically tune your TV to its correct output channel. For more information, see section 8.

[

Movies], [Sports], [News

]

Program your favorite channels on the “Movies”, “Sports” and “News” buttons. For more information see section 9.

[

VCR / VOD]Toggle

“Toggles” the VCR buttons between cable VideoOn-Demand (VOD) and VCR / DVD functions. For more information, see section 10.

SmartKeys

Program multiple button presses on the [CBL], [TV

]

and [BYPASS]buttons. For more information, see section 15.

[

DEVICE

]

Tells which device you are currently operating by illuminating the device’s power button. While the current device is illuminated, press a nonilluminated power button to operate a different device.

Memory Guard

Eliminates reprogramming after battery changes.

Time Out

Shuts remote off if any button is pressed and held for 45 seconds. This extends battery life in the event the remote becomes lodges under or between heavy objects.

Before you can use your remote control, it must be programmed (set-up) to operate the above devices.

CABLE TV VIDEO AUDIO

Cable set-top terminals Televisions VCR, DVD Cassette deck, CD, receivers, amplifiers, 2

TV, 2ndVCR.

5. Programming Your TV

Reset

Lets you reset your remote to its original default settings. For more information, see section 17.

3. Installing / Replacing Batteries

Install two (2) new “AA” batteries as indicated by the diagram in the battery compartment.

When the illuminated buttons become dim or do not illuminate during use, install two (2) new “AA” size batteries.

Your remote control has Memory Guard

, which

eliminates reprogramming after battery changes.

4. Programming Your Cable Set-Top Terminal

Model RT-U49C is pre-programmed to operate the Scientific-Atlanta Explorer

, Pioneer Voyager

and Pace 510 digital set-top terminals.

To operate a different cable set-top terminal, look up the brand and model in the Cable Setup Code list. If you are not sure of your brand and model, contact your cable company.

To program your cable set-top terminal...

1. Turn on your cable set-top terminal.

2. Press [CBL], then [SELECT]together - hold both buttons down until [CBL]illuminates.

3. From the Cable Setup Code list, locate and enter

the 3-digit code for your brand and model.

4. Press [CBL]to lock in the code. The [CBL

]

button will blink and go out.

Write your cable set-top terminal brand & setup code__________

Refer to section 16 for code number readback.

Cable Setup Codes

Pace

510 digital 004

Philips

digital 017

Pioneer

Voyager 004 BC-4600, BA-6000 008 BA-9000 009 BA-V1000, BA-V2000 010

Tocom

5503VIP, 5507, 5508 011

Zenith

Z-Tac 012 MM2500 013

Oak

Sigma One, P1, P2, P3 014 Sigma 2000

TV Setup Codes

Admiral 058 061 062 067 Adventura 004 Akai 065 Aiwa 135 Amark 007 086 Ampro 112 Amstrad 006 Anam 088 089 093 111 120 125 134 AOC 065 Audio Vox 111 Belcor 041 Bell & Howell 062 Broksonic 011 054 Brokwood 041 Candle 027 052 Centurion 044 051 Citizen 027 052 059 062 Concerto 041 051 Contec 020 Coronado 007 Craig 134 Crown 007 Curtis Mathes 044 061 062 Daewoo 027 039 040 041 042 051 090 091

092 094 101 102 108 114 118 121

123 130 Daytron 041 044 051 Dumont 041 Electro Home 041 051 Elektra 002 Emerson 007 008 011 012 017 054 065 079

108 110 131 Envision 041 051 Fisher 010 028 Funai 004

GE 005 019 027 031 037 041 046 051

053 055 061 070 131

Gibralta 007 025 027 031 041 044 051 059

060 065

Goldstar(LG) 007 027 031 041 044 059 060 065

124 Grundig 059 Hall Mark 041 051 Hitachi 007 027 049 051 083 085 098 100 Inkel 075 JC Penney 005 010 027 037 041 051 065 069

070 JVC 048 077 080 132 Kawasho 041 051 KMC 007 KTV 007 030 059 065 Kurazai 062 Lodgenet 062 Logik 062 Luxman 027 041 051 LXI 006 035 067 Magnavox(Philips)

001 005 007 014 026 027 041 052

068 081 Majestic 062 Marantz 003 065 076 Megatron 086 Memorex 010 031 062 MGA/Mitsubishi 003 027 031 041 044 051 065 076

084 Montgomery Ward

007 037 044 057 058 062 065 067

081 NEC 023 027 031 044 101 Orion 013 017 033 045 047 078 Panasonic 018 019 021 024 053 063 Philco 001 007 027 052 065 081 Philips(Magnavox)

001 005 007 014 026 027 041 052

068 081 Pilot 041 059 097 Pioneer 056 103 Portland 007 027 ProScan 055 061 073 082 112 Proton 031 126 128 Pulsar 041 Quasar 019 Radio Shack 041 Realistic 012 057 079 RCA 022 027 046 053 055 061 065 072

073 082 Sampo 031 044 Samsung 007 016 020 031 044 119 129 Sanyo 002 010 028 104 133 Scott 031 044 079

Motorola (General Instrument)

DCT, CFT 2200 001 CFT2100, CFT2000 002

Jerrold 003

DL4, DP(V), DQN(V), DPBB

Scientific Atlanta

Explorer 004 Explorer(#, *) 015 Explorer(Blue Ridge) 016 Explorer(WorldGate™) 018 8600X 005 8600 006 8540, 70, 90 007

Hitachi 106 Jensen 126 JVC 053 145 Kenwood 045 luxman 110 Marantz 080 114 124 131 NAD 108 120 Onkyo 052 105 118 147 Optimus 040 115 158 Panasonic 104 109 Parasound 155 Philips 089 Pioneer 058 090 081 135 Quasar 104 Radio Shack 012 040 Realistic 079 137 138 Rotel 140 Sansui 114 Sanyo 044 Scientific Atlanta 116 Scott 055 Sharp 082 Sherwood 012 040 Sony 008 020 059 091 Soundesign 048 092 093 094 SSI 134 Taekwang 158 Teac 054 064 Technics 095 104 Victor 053 145 Yamaha 030 133 171 Zenith 048 088 092 093 094

Adcom 139 Aiwa 163 165 Akai 158 Bose 136 163 Carver 073 167 Citation 162 Denon 034 068 102 Everquest 107 Fisher 073 Fosgate Audionics

169 Goldstar(LG) 088 Harman/Kardon 043 169 170 172

Aiwa 153 Akai 157 Audio Access 161 B&K 141 142 Denon 039 Dynamic Bass 087 Fisher 129 Fosgate Audionics 168 Haitai 164 Harman/Kardon 051 168 Inkel 164 JCPenny 143 JVC 056 098 Kenwood 042 129 160 164 Kloss 143 Lexicon 154 Luxman 111 159 Marantz 125 130 NAD 121 Nakamichi 150 Onkyo 066 119 146 Optimus 122 123 157 Philips DCC 026 Pioneer 010 032 099 113 117 Sansui 149 152 166 Sherwood 112 Sony 022 096 Taekwang 157 Teac 127 150 Technics 037 144 148 Technics DCC 026 Toshiba 151 Wards 129 Yamaha 067 100 101 132

2. Compact Disc

7. Programming Your Audio Device

To program your laser disc, compact disc, receiver / amplifier or cassette tape...

1. Turn on your Audio device - cassette deck, CD, receiver, amplifier.

2. Press [AUDIO], then [SELECT]together - hold both

buttons down until [AUDIO]illuminates.

3 a. Press and hold [CH+]until your Audio device

turns off. As soon as your Audio device turns off, release [CH+].

b. From the Audio Setup Code list, locate and

enter a 3-digit code for your brand. If multiple codes are listed, you may have to enter several codes until your Audio device turns off.

4. Press [MUTE

]

If your Audio device turns back on,

press [AUDIO]to lock in the code. The [AUDIO

]

button will blink and go out. If your Audio device dose not turn back on, repeat

steps 3 and 4 until you can turn your Audio device off and on

❶

Write your Audio brand & setup code

To program your 2

TV, 2

VCR, or 2

DVD...

1. Turn on your 2

TV, 2

VCR, or 2ndDVD.

2. Press [AUDIO], then [SELECT]together - hold both

buttons down until [AUDIO] illuminates.

3. Press [TV]to program a 2

TV (or[VIDEO]for 2

VCR). The [AUDIO]and[TV] buttons will blink.

4. a. Press and hold[CH+]until your 2

TV turns

off. As soon as your 2

TV turns off, release

[CH+] OR

b. From the TV Setup Code list, locate and enter

a 3-digit code for your brand. If multiple codes are listed, you may have to enter several codes until your 2

TV turns off.

5. Press [MUTE

]

If your 2ndturns back on, press

[

AUDIO]to lock in the code. The [AUDIO]button

will blink and go out. If your 2

TV does not turn back on, repeat steps

3 and 4 until you can turn your 2

TV off and on❶.

Write your 2

TV brand & setup code .

Refer to section 16 for code number readback.

❶

Note when using the Point and Press™

Programming method (step 4a). If you find a code that turns your Audio device off but not back on (step

4), you may have gone past the correct matching

code. Try pressing [CH–]one

press at a time until

you find a code that turns your Audio device back on.

Audio Setup Codes

1. Laser Disc

3. Receiver / Amplifier

4. Cassette Tape

6. Programming Your Video (VCR / DVD)Device

❶

Note When using the Point and Press™

Programming method (step 3a). If you find a code that turns yourVCR /DVD off but not back on (step 4), you may have gone past the correct matching code. Try pressing [CH–]one

press at a time until you find

a code that turns your VCR / DVD back on.

VCR Setup Codes

To program your VCR or DVD...

1. Turn on your VCR or DVD.

2. Press [VIDEO], then [SELECT]together - hold both

buttons down until [VIDEO]illuminates.

3 a. Press and hold [CH+]until your VCR or DVD

turns off. As soon as your VCR or DVD turns off, release [CH+].

b.From the VCR - DVD Setup Code list, locate

and enter a 3-digit code for your brand. If multiple codes are listed, you may have to enter several codes until your VCR or DVD turns off.

4. Press [MUTE

]

If your VCR or DVD turns back on,

press [VIDEO]to lock in the code. The [VIDEO

]

button will blink and go out. If your VCR or DVD does not turn back on, repeat

steps 3 and 4 until you can turn your VCR or DVD off and on

❶

Write your VCR / DVD brand & setup code

Refer to section 16 for code number readback.

Sears 002 007 010 016 027

028 043 069 Sharp 007 009 023 035 057 064 067 096 Signature 2000 007 044 058 062 067 Sony 032 038 050 066 Soundesign 052 Squareview 006 Supre-Macy 071 Sylvania 001 005 006 026 027 031 044 052

081 108 Symphonic 004 006 Tatung 019 Techwood 027 Teknika 001 007 027 052 062 079 Telerent 007 062 TMK 027 031 Tera 127 Toshiba 016 029 043 069 Totevision 059 Universal 027 070 Vidtech 027 Wards 027 031 White Westinghouse

058 XR-1000 062 Yamaha 027 York 031 044 Zenith 004 015 025 034 036

Admiral 014 056 Adventura 025 Aiwa 025 106 Akai 011 021 051 092 098 103 Audio Dynamics 007 044 Bell & Howell 005 024 Broksonic 009 048 053 064 Canon 008 034 105 Citizen 002 006 028 060 Colortyme 044 Craig 028 030 Curtis Mathes 008 013 034 044 060 Daewoo 006 010 012 057 058 112 114 116 Daytron 055 058 DBX 007 044 Dynatech 025 106 Emerson 002 003 006 008 009 022 033 040

049 051 064 091 101 106 107 109 Fisher 005 015 024 030 052 Funai 025 106 GE 008 027 028 034 041 Go Video 019 043 063 Goldstar(LG) 002 060 Harman/Kardon 044 Hitachi 025 046 059 106 113 Instant Replay 008 017 034 JC Penney 005 008 017 028 034 044 046 JVC 004 005 007 038 026 060 095 102 JCL 008 Kenwood 004 005 007 060 106 Logik 042 Lloyd 025 106 LXI 002 025 106 Magnavox 008 025 034 036 106 Marantz 005 008 036 044 060 Marta 002 Matsui 094 Memorex 002 005 025 030 034 104 106 110 Mitsubishi 023 029 031 047 106 MTC 025 028 106 Montgomery Ward

014 025 027 034 037 062 Multi Tech 025 028 042 106 NEC 004 005 007 044 070 071 Orion 022 049 065 066 067 068 Panasonic 008 013 034 099 Pentax 046 Philco 008 034 036 106 Philips 008 017 034 036 106 Pioneer 004 045 046

Portland 058 ProScan 027 041 Quasar 013 034 Quartz 005 009 RCA 001 008 016 017 027 028 037 041

046 106 Realistic 005 014 025 030 034 106 Samsung 021 028 039 098 108 111 Sansai 042 Sansui 004 093 Sanyo 005 024 114 Sayyo 030 Scott 003 006 031 042 Sears 002 005 015 030 046 Sharp 014 056 Shintom 042 Signature 2000 014 025 027 037 062 Sony 032 035 050 Soundesign 106 Sylvania 008 016 017 025 034 036 047 054

065 073 074 106 Symphonic 025 106 Tandy 005 025 106 Tashiko 002 Tatung 007 Teac 007 025 106 Technics 008 Teknika 002 053 106 Thomas 106 TMK 091 Toshiba 006 015 046 052 096 Totevision 002 028 Unitech 028 Vector Research 031 044 Video Concepts 044 106 Wards 002 014 025 028 060 106 XR-1000 042 Yamaha 005 007 044 106 Zenith 004 018 035 038 061 106

DVD Setup Codes

Denon 076 GE 077 078 Hitachi 117 JVC 079 KLH 118 LG 079 Magnavox 081 082 Mitsubishi 083 Panasonic 084 Pioneer 085 Samsung 086 Sharp 119 Sony 087 Thomson 120 Toshiba 088 Yamaha 089 Zenith 089

Pioneer 013 014 Proscan 029 RCA 029 Sanyo 006 Sony 025 Zenith 006

ADC 085 Akai 017 031 Aiwa 086 Carver 086 Crown 033 Denon 036 Fisher 001 003 Goldstar(LG) 016 Harman/Kardon 041 JVC 063 Kenwood 001 015 028 065 086 Krol 086 Magnavox 002 007 019 038 Mission 086 Mitsubishi 017 070 NAD 024 046 072 Nakamichi 075 077 NEC 018 NSM 086 Onkyo 076 Panasonic 009 035 Philips 007 019 038

Pioneer 009 047 097 Quasar 035 Radio Shack 009 023 028 049 062 RCA 019 038 057 Sanyo 003 032 SAE 086 Scott 023 Sharp 021 028 Sony 050 061 071 Soundesign 004 005 027 060 STS 085 Sylvania 007 Teac 023 Technics 035 042 103 Toshiba 024 Yamaha 074

Once you have programmed each of your devices, press [ALL]to turn all of them on / off with a single button press.

If you would like the[ALL]button to also tune your TV to its correct output channel (typically 3) follow these steps:

1. Press [DEVICE], then [CBL]to select the remote’s cable mode.

2. Press [SETTINGS], then [ALL]together - hold

both

buttons down until the [TV]illuminates.

3. Press [0], then [3

]

❶, ❷

4. Press [CH+]to store the TV channel. The [TV

]

button will blink and go out.

❶

Your TV output channel may also be 2 or 4. If you are not sure, contact your cable operator.

❷

Depending on your TV brand, the channel may have to be entered as “3”, “03” or “003”.

Note : When pressing the [ALL]button, be sure to keep the remote control aimed at the devices to ensure all functions are received in their entirety.

Each of these buttons can be programmed to store a favorite cable channel.

For example, to program the [MOVIES]button to cable

channel 53, follow these steps:

1. Press [DEVICE], then [CBL]to select the remote’s cable mode.

2. Press [CBL], then [MOVIES]together - hold both

down until [CBL]illuminates.

3. Press [0], [5], [3]. (enter ch. # in 3-digit format)

❶

4. Press [MOVIES]to store this channel. The [CBL

]

button will blink and go out.

Programming the [SPORTS]or [NEWS]buttons is the same general procedure as above.

❶

May also be 4-digit (or 5-digit) format. The exact # of digits you need to enter depends on how your cable operator has setup your cable set-top terminal.

Your remote control is designed to operate all the features and functions of your digital cable set-top terminal.

To operate your cable set-top terminal, press [

DEVICE], then [CBL]. In your remote’s cable

mode, you can then press...

[

ALL

]

ALL devices on / off.

[

CBL

]

Cable set-top terminal on / off.

[TV]

TV on /off.

[

VIDEO

]

VCR / DVD on / off.

[

AUDIO

]

Audio on / off.

[

]/ [

–

]

Increases / decreases cable channel.

[

VOL

]/ [

VOL

–

]

Increases / decreases cable volume.

[

MUTE

]

Mute cable volume.

[

EXIT

]

Exits on-screen menus, view guide, interactive screens.

[

SETTINGS

]

Displays program settings.

[

GUIDE

]

Displays interactive program guide.

[

INFO

]

Displays channel, time information.

[

FAV

]

View favorite channels.

[

LAST

]

Last channel viewed.

[A], [B], [C]

On-screen decision buttons.

[0]

[9]

Numeric entry buttons.

[

PAGE

+ –

]

Page up / down through menus, program guide.

[

], [ ], [ ], [ ]

Navigate on-screen menus, program guide, PPV events and interactive services.

[

SELECT

]

Select menu, interactive screen item.

[

BYPASS

]

Switch between cable set-top terminal and TV.

[

TV / VCR

]

Changes VCR video inputs.

[

VCR / VOD

]

“Toggles” the VCR buttons between cable Video-On-Demand (VOD) and VCR / DVD functions.

Press [VCR / VOD]. If... a.[CBL]illuminates, the VCR buttons

are operating your cable Video-On

-Demond(VOD) functions. OR

b.[VIDEO]illuminates, the VCR

buttons are operating your VCR or DVD functions.

While [CBL]or [VIDEO]is illuminated, press [VCR / VOD]to switch from Video-On-Demond to VCR or VCR to Video-On-Demand.

[]

VCR / DVD or VOD rewind.

[]

VCR / DVD or VOD play.

[]

VCR / DVD or VOD fast-forward.

[]

VCR / DVD or VOD pause.

[]

VCR / DVD or VOD stop.

[]

VCR / DVD or VOD record.

[

MOVIES

]

Programmable favorite channel.

[

SPORTS

]

Programmable favorite channel.

[

NEWS

]

Programmable favorite channel.

When you first program your remote, volume / mute are controlled through your TV(except AUDIO which defaults to the AUDIO device).

The volume control options in each mode of the remote are:

CBL TV (default), Cable or Audio. TV TV (default), Cable or Audio. VIDEO TV (default), Cable or Audio. AUDIO

Audio device (default), Cable or TV.

To control volume / mute through your cable set-top terminal in the remote’s cable

mode...

1. Press [CBL

]

, then [SELECT]together - hold both

buttons down until [CBL]illuminates.

2.Press [VOL

]

, then [CBL]for cable volume. The

[

CBL

]

button will blink and go out.

To return volume control to your TV, repeat step 1, then press [VOL

]

, then [TV]in step 2.

To control volume / mute through your cable set-top terminal in the remote’s Video

mode...

1. Press [VIDEO], then [SELECT]together - hold both

bottons down until [VIDEO]illuminates.

2. Press

[

VOL

]

, then

[

CBL]for Cable volume. The

[

VIDEO]button will blink and go out.

To return volume control to your TV, repeat step 1, then press

[

VOL

]

, then[TV]in step 2.

Your remote has three SmartKeys

([

CBL], [TV],

[

BYPASS])that operate in its cable

mode.

Each Smartkey

can be programmed so whenever it’s pressed, it can transmit up to 12 individual button presses in sequence.

Programming and using the [CBL]SmartKey

The [CBL]button normally turns on / off your cable set-top terminal.

You can program the [CBL]Smartkey

to turn on your cable set-top terminal and TV, and tune your TV to its correct output channel (typically 3) with one button press.

1. Press [DEVICE], then [CBL]to select the remote’s

cable mode.

2. Press [CBL], then [SETTINGS]together - hold

both

button down until

[

CBL]illuminates.

3.In

this order, press [CBL], [TV], [0], [3

]

❶, ❷

The [CBL]button will blink and remain illuminated.

4.Press [CH

]

to lock in this setting. The [CBL

]

button will blink and go out.

To return the [CBL]button to its normal function, repeat steps 1 & 2, then press [CH

–

]

Programming and using the [TV]SmartKey

The [TV]button normally turns on / off your TV. You can program the [TV]SmartKey

to turn on your TV and tune your TV to its correct output channel (typically 3) with one

button press.

1. Press [DEVICE], then [CBL]to select the remote’s

cable mode.

2.Press [TV], then [SETTINGS]together - hold both

buttons down until [TV]illuminates.

3. In

this order, press [TV], [0], [3

]

❶, ❷

The [TV]button will blink and remain illuminated.

4. Press [CH

]

to lock in this setting. The [TV]button

will blink and go out.

To return the [TV]button to its normal function, repeat setps 1 and 2 above, then press [CH

–

]

Programming and using the [BYPASS

]

SmartKey

The [BYPASS]button (cable mode) normally places your Cable set-top terminal in a BYPASS mode. While the cable set-top terminal is in its BYPASS mode, you can record one program on your VCR and watch a different program through your TV. When exiting the cable set-top terminal’s BYPASS mode, your TV must be re-tuned to its correct output channel (typically 3) for proper cable reception.

You can program the [BYPASS]SmartKey

so automatically tune your TV to its correct output channel.

1. Press [DEVICE], then [CBL]to select the remote’s

cable mode.

2.Press [BYPASS], then [SETTINGS]together -

hold both

buttons down until [CBL]illuminates.

3. In

this order, press [BYPASS], [DEVICE], [TV], [0],

[3]

❶, ❷

. The [CBL]button will blink and remain

illuminated.

4. Press [CH

]

to store the setting. The [CBL

]

button will blink and go out.

To return the [BYPASS]button to its normal function, repeat steps 1 and 2 above, then press [CH

–

]

❶

Your TV output channel may also be 2 or 4. If you are not sure, contact your cable operator.

❷

Depending on your TV brand, the channel may have to be entered as “3”, “03” or “003”

Note : When using any SmartKeyTMto transmit a series of functions, be sure to keep your remote aimed at the devices to ensure all functions are received in their entirety.

To identify a 3-digit setup code stored under the Point and Press

method, follow these steps:

To identify the TV

setup code...

1.Press [TV], then [SELECT]together - hold both

buttons down until [TV]illuminates.

2. Press [INFO

]

The [TV]button will blink back the code numbers, with a 1-second interval between each digit of the code.

Example : For code “035”, the remote will blink 10 times, then 3 times, then 5 times.

To identify the 3-digit Video code, press [VIDEO], then [SELECT]in step 1, then press [INFO].

11. Operating Your TV

To operate your TV, press [DEVICE], then [TV]. In your remote’s TV

mode , you can then press...

[

ALL

]

ALL devices on / off.

[

CBL

]

Cable set-top terminal on / off.

[TV]

TV on /off.

[

VIDEO

]

VCR / DVD on / off.

[

AUDIO

]

Audio on / off.

[

]

/ [CH

–

]

Increases / decreases TV channel.

[0] [9]

Numeric entry buttons.

[

VOL

]

/ [VOL

–

]

Increases / decreases TV volume.

[

MUTE

]

Mute TV volume.

[

TV / VCR

]

Change TV’s video inputs.

[]

VCR / DVD rewind.

[]

VCR / DVD play.

[]

VCR / DVD fast-forward.

[]

VCR / DVD pause.

[]

VCR / DVD stop.

[]

VCR / DVD record.

13. Operating Your Audio Device

[

ALL

]

ALL devices on / off.

[

CBL

]

Cable set-top terminal on / off.

[TV]

TV on /off.

[

VIDEO

]

VCR / DVD on / off.

[

AUDIO

]

Audio on / off.

[CH+]/ [CH–]

Increases / decreases channel.

[0] [9]

Enter channels.

[

VOL+]/ [VOL

–]

Increases / decreases volume.

[

MUTE

]

Mute volume.

[

TV / VCR

]

Change VCR / DVD video inputs.

[ ]

Rewind.

[ ]

Play.

[ ]

Fast-forward.

[ ]

Pause.

[ ]

Stop.

[ ]

Record.

Your remote control can operate many functions of your VCR or DVD.

To operate your VCR or DVD, press [DEVICE

]

then [VIDEO]. In your remote’s Video

, you can

then press...

[

ALL

]

ALL devices on / off.

[

CBL

]

Cable set-top terminal on / off.

[

]

TV on /off.

[

VIDEO

]

VCR / DVD on / off.

[

AUDIO

]

Audio on / off.

[

]

/ [CH

–

]

Increases / decreases VCR channel.

[0]- [9]

Enter VCR channels.

[

VOL

]

/ [VOL

–

]

Increases / decreases TV volume.

[

MUTE

]

Mute TV volume.

[

TV / VCR

]

Change VCR video inputs.

[

]

VCR / DVD rewind.

[

]

VCR / DVD play.

[

]

VCR / DVD fast-forward.

[

]

VCR / DVD pause.

[

]

VCR / DVD stop.

[

]

VCR / DVD record.

Your remote control can operate many functions of your TV.

Your remote control can be setup to operate a tape deck, CD, receiver, amplifier, 2ndTV, 2ndVCR as an Audio device.

To operate your Audio device, press [DEVICE], then [AUDIO]. In your remote’s Audio

mode, you

can press...

8. Programming the [

ALL

] Button

10. Operating Your Cable Set-Top Terminal

9. Programming [

MOVIES

], [

SPORTS

] [

NEWS

]

12. Operating Your Video(VCR or DVD) Device

14. Programming Volume Control

15. Your Remote’s SmartKeys

16. Code Number Readback

To identify the 3-digit Audio code, press [AUDIO], then [SELECT]in step 1, then press [INFO].

To reset your remote control to its factory default settings...

1. Press [CBL], then [SELECT]together-hold both down until the [CBL]illuminates.

2. Press [SETTINGS], then [SETTINGS]again. The [

CBL]button will blink and go out.

18. Helpful Tips and Troubleshooting

1. Your remote is equipped with a Point and Press

Programming label on the back of its case. This will help you quickly program the remote without using codes.

2. An illuminated mode (power) button will remain on while the remote is in a programming mode. In the absence of an entry, the illuminated button will go out after 45 seconds.

When locking in your devices, the illuminated button will blink and go out,

3. When using the Point and Press

programming method, you may find a code that turns your device off but not back on. If this happens...

a.the correct code has not been found. Continue

pressing [CH

]

until your devices turn on and

off. OR

b.you may have gone past the correct matching

code. Try pressing [CH

–

]

one

press at a time until you find a code that turns your devices turn back on.

4.If the same button is pressed and held for 45 seconds, your remote control will turn itself off. This extends the battery life by should the remote become lodged under or between heavy objects.

5. For diagnostic functions on Motorola (GI) DCT and CFT2200 cable set-top terminal, press

[

SELECT

]

[

INFO]together.

6. If you have any questions concerning the operation of your cable set-top terminal, contact your cable operator.

17. Resetting Your Remote control

Model

Mfg Scientific Atlanta

8600

8540,70,90

Explorer

8600x

004

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Guide

Info

Settings

Select

< >

Page +

Page -

Mute

Exit

Vol +

Vol -

Ch +

Ch -

A B C

0, 1 - 9

Last

Fav

REW - Cable or Video PLAY - Cable or Video

FF - Cable or Video

PAUSE - Cable or Video

STOP - Cable or Video

REC - Cable or Video

Bypass

TV / VCR (VCR)

VCR / VOD

Movies Sports

News

005

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

View Guide

Info

Sel

< >

Day > < Day

Mute

Vol +

Vol Ch +

Ch -

PPV

0, 1 - 9

Last

Fav

Back

Fwd

Pause

Bypass

TV / VCR (VCR)

VCR / VOD

Movies

Sports

News

006

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Display

Sel

Sleep

Mute

Vol +

Vol Ch +

Ch -

Buy

0, 1 - 9

Last

Fav

TV / VCR (VCR)

VCR / VOD

Movies

Sports

News

007

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Sel

AU Prg

Mute

Vol +

Vol Ch +, Power on Ch -, Power on

Buy

0, 1 - 9

Lch Rcl

TV / VCR (VCR)

VCR / VOD

Movies

Sports News

Explorer

(#, *)

015

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Guide

Info

Settings

Select

< >

Page + Page -

Mute

Exit

Vol +

Vol Ch +

Ch -

A B C

0, 1 - 9

Last

Fav

REW - Cable or Video

PLAY - Cable or Video

FF - Cable or Video

PAUSE - Cable or Video

STOP - Cable or Video

REC - Cable or Video

Bypass

TV / VCR (VCR)

VCR / VOD

Channel Memory

Explorer

(Blue Ridge)

016

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Guide

Info

Settings

Sel

< >

Day >

< Day

Mute

Exit

Vol +

Vol Ch + Ch -

A B C

0, 1 - 9

Last

Fav

REW - Cable or Video PLAY - Cable or Video

FF - Cable or Video

PAUSE - Cable or Video

STOP - Cable or Video

REC - Cable or Video

Bypass

TV / VCR (VCR)

VCR / VOD

CH Link

WEB MALL

Explorer

(WorldGate™)

018

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Guide

Info

Settings

Sel

< >

Day > < Day

Mute

Exit

Vol +

Vol -

Ch +

Ch -

A B C

0, 1 - 9

Last

Fav

REW - Cable or Video PLAY - Cable or Video

FF - Cable or Video

PAUSE - Cable or Video

STOP - Cable or Video

REC - Cable or Video

Bypass

TV / VCR (VCR)

VCR / VOD

CH Link

WorldGate

Channel Memory

Setup Code

Device

ALL

CABLE

TV VIDEO AUDIO

GUIDE

INFO

SETTINGS

SELECT

< >

PAGE PAGE

MUTE

EXIT

VOL +

VOL -

CH + CH -

A B C

0, 1 - 9

LAST

FAV

REW

PLAY

FF PAUSE

STOP

REC

BYPASS TV / VCR

VCR / VOD

Movies Sports

News

Model

Mfg

Pioneer

Philips

BA-9000

Digital

BA-V1000 BA-V2000

Voyager

BC-4600,

BA-5000, BA-6000

004

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Guide

Info

Settings

Select

< >

Page +

Page -

Mute

Exit

Vol +

Vol Ch + Ch -

A B C

0, 1 - 9

Last

Fav

REW - Cable or Video PLAY - Cable or Video

FF - Cable or Video

PAUSE - Cable or Video

STOP - Cable or Video

REC - Cable or Video

Bypass

TV / VCR (VCR)

VCR / VOD

Movies

Sports News

008

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Clock

Timer

Mute

Clr

Vol +

Vol Ch + Ch -

Str

Auth

0, 1 - 9

Rcl

C / R

TV / VCR (VCR)

VCR / VOD

Movies Sports

News

009

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Cursor

Mute

Vol +

Vol -

Ch +

Ch -

Enter Order

0, 1 - 9

Last Ch

Fav Ch

A / B

TV / VCR (VCR)

VCR / VOD

Movies

Sports

News

010

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Guide

Info

Sel

< >

Page Page

Mute

Exit

Vol +

Vol Ch + Ch -

Clear Order

Help

0, 1 - 9

Last

Fav

A / B

TV / VCR (VCR)

VCR / VOD

Movies

Sports

News

017

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Guide

info

< >

Page +

Page -

Mute

Exit

Vol +

Vol -

Ch +

Ch -

A B C

0, 1 - 9

Last

Fav

TV / VCR (VCR)

VCR / VOD

PPV

Setup Code

Device

ALL

CABLE

TV VIDEO AUDIO

GUIDE

INFO

SETTINGS

SELECT

< >

PAGE PAGE

MUTE

EXIT

VOL + VOL -

CH +

CH -

A B C

0, 1 - 9

LAST

FAV

REW

PLAY

PAUSE

STOP

REC

BYPASS TV / VCR

VCR / VOD

Movies Sports

News

Motorola (General Instrument)

DCT, CFT2200

CFT2200,2100

DL4, DP(V),

DQN(V), DPBB

001

CBL

All on

CBL on / off

TV on / off

Video on / off

Audio on / off

Guide

Info

Select/OK

< >

Page +

Page -

Mute

Exit

Vol + Vol Ch +

Ch -

A B C

0, 1 - 9

Last

Fav

REW - Cable or Video

PLAY - Cable or Video

FF - Cable or Video

PAUSE - Cable or Video

STOP - Cable or Video

REC - Cable or Video

Bypass

TV / VCR (VCR)

VCR / VOD

PPV/Lock

Help

Music/Enter

002

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Display

Sel

Mute

Del

Vol +

Vol Ch + Ch -

Enter

Prog

0, 1 - 9

Fav

A / B

TV / VCR (VCR)

VCR / VOD

Movies

Sports

News

003

CBL

All on

CBL on / off

TV on / off Video on / off Audio on / off

Learn

Sel (Event)

PC / PM

TCP

Mute

Del

Vol + Vol Ch +

Ch -

Enter

Prog

0, 1 - 9 <

Fav

A / B

TV / VCR (VCR)

VCR / VOD

Movies

Sports

News

Contec RT-U49C User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual