PC-HELPER
Expansion Adaptar
for Express Card Slot
EAD-CE-EC
User’s Manual
CONTEC CO.,LTD.
Table of Contents
Check Your Package ...............................................................................................................................ii
Copyright .................................................................................................................................................ii
Trademarks ..............................................................................................................................................ii
Table of Contents ...................................................................................................................................iii
1 BEFORE USING THE PRODUCT 1
About the Board ......................................................................................................................................1
Features............................................................................................................................................. 1
Expansion chassis (Option) .............................................................................................................1
Restrictions....................................................................................................................................... 2
Customer Support.................................................................................................................................... 3
Web Site ........................................................................................................................................... 3
Limited Three-Years Warranty............................................................................................................... 3
How to Obtain Service ............................................................................................................................ 3
Liability ...................................................................................................................................................3
Safety Precautions................................................................................................................................... 4
Safety Information ........................................................................................................................... 4
Handling Precautions .......................................................................................................................5
Environment ..................................................................................................................................... 6
Inspection ......................................................................................................................................... 6
Storage .............................................................................................................................................. 6
2SETUP 7
What is Setup?......................................................................................................................................... 7
Step 1 Preparation ...................................................................................................................................8
Items to be prepared ......................................................................................................................... 8
Names of major parts .......................................................................................................................9
Step 2 Installing the Expansion Board ................................................................................................... 9
Step 3 Connecting the Cable................................................................................................................. 10
Connecting the connection cable to the PC Card.......................................................................... 10
Connecting the connection cable to the Expansion Chassis......................................................... 10
Plugging the Power Cable.............................................................................................................. 10
Step 4 Plugging the PC Card ................................................................................................................11
Step 5 Setup and Check ........................................................................................................................ 12
Starting the system .........................................................................................................................12
Setting up the hardware in Windows ............................................................................................ 13
Checking the hardware in Windows..............................................................................................13
Setup Troubleshooting .......................................................................................................................... 14
Symptoms and Actions ..................................................................................................................14
EAD-CE-EC
iii
3 ABOUT HARDWARE 15
Hardware specification..........................................................................................................................15
BUS-PC-EC ....................................................................................................................................15
iv
EAD-CE-EC
1. Before Using the Product
1 Before Using the Product
This chapter provides information you should know before using the product.
About the Board
This product is an expansion adapter (bundled with a 1m connection cable) that connects an
ExpressCard slot on a notebook computer to a PCI bus expansion chassis.
The adapter operates on Windows Vista or XP.
Features
- PCI bus (5V/32bit 33MHz) slots can be added to a notebook computer via its ExpressCard.
When an optional expansion chassis is connected, PCI bus (5V/32bit 33MHz) expansion slots can be
added to the notebook’s ExpressCard. The product comes with a connection cable (1m), which can be
used to connect ExpressCard with the expansion chassis.
- Expansion chassis can be selected according to your use.
An expansion chassis can be selected according to the number of slots needed for the PCI bus as well as
the board size.
- Power-ON/OFF control of the expansion chassis can be linked to that of your PC.
As your PC is turned ON or OFF, the expansion chassis can also be turned ON or OFF, accordingly.
Expansion chassis (Option)
PCI Bus Expansion Chassis
Short size, 2-Slots, BLACK
（
Check the CONTEC’s Web site for more information on these expansion chassis.
EAD-CE-EC
）
: ECH-PCI-CE-H2B
1
1. Before Using the Product
Restrictions
This product is used in a combination with the optional expansion adapter. The following restrictions
apply to the situation when the expansion adapter is connected to the expansion chassis.
EAD-CE-EC has restrictions on the types of PCs and boards that can be used.
Be sure to check the following restrictions before use.
< Restrictions of PC>
EAD-CE-EC uses the PCI-to-PCI Bridge to extend the bus by using the expansion chassis
ECH-PCI-CE-H2B.
The PCI boards plugged in PCI slots in the EAD-CE-EC are recognized if the PCI-to-PCI bridge is
recognized by the BIOS in the PC used. Ask the PC vendor for whether the BIOS recognizes the PCIto-PCI bridge.
< Restrictions on transfer rate >
When the expansion chassis accommodates a board that performs high-speed transfer such as bus
mastering, the overall transfer rate may be lower than that of PCI bus slots in the main unit of a desktop
PC.
This is caused by bus extension by the PCI-to-PCI Bridge.
The transfer rate may vary with the system configuration and the type of the PC.
< Restrictions of PCI board>
None of the following types of boards can be used in any expansion slot in the expansion chassis
connected to the EAD-CE-EC.
- Video display board (VGA board)
- Board to connect a PCI bus expansion chassis
- Board explicitly stated not to be used with the PCI-to-PCI Bridge
Some boards, even PCI-compliant ones, may not work depending on their specifications
2
EAD-CE-EC
1. Before Using the Product
Customer Support
CONTEC provides the following support services for you to use CONTEC products more efficiently
and comfortably.
Web Site
Japanese http://www.contec.co.jp/
English http://www.contec.com/
Chinese http://www.contec.com.cn/
Latest product information
CONTEC provides up-to-date information on products.
CONTEC also provides product manuals and various technical documents in the PDF.
Free download
You can download updated driver software and differential files as well as sample programs available in
several languages.
Note! For product information
Contact your retailer if you have any technical question about a CONTEC product or need its price,
delivery time, or estimate information.
Limited Three-Years Warranty
CONTEC products are warranted by CONTEC CO., LTD. to be free from defects in material and
workmanship for up to three years from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the
original invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office,
from which it was purchased.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and
original products. The warranty is not applicable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in
which case repairs will be considered beyond the warranty policy.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you
purchased before returning any product.
* No product will be accepted by CONTEC group without the RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor
be liable for any incidental or consequential damages due to such defect or consequences that arise from
Safety Precautions.
Understand the following definitions and precautions to use the product safely.
EAD-CE-EC
3
1. Before Using the Product
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these
labels to operate the equipment safely.
DANGER
WARNING
CAUTION
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
4
EAD-CE-EC
1. Before Using the Product
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.
CAUTION
- ExpressCard [BUS-PC-EC] must be connected to the ExpressCard slot on the PC.
- Do not touch any externally connected connector as long as this product is turned on. Otherwise,
it may malfunction due to static electricity or other factor.
- Do not apply impact loads to or bend the ExpressCard [BUS-PC-EC].
Doing so may result in a malfunction, overheating, fault, or damage.
- Do not plug or unplug any ExpressCard [BUS-PC-EC] into or from the Card slot with the PC or
expansion chassis powered.
- Do not plug or unplug the cable interconnecting the ExpressCard [BUS-PC-EC] and the expansion
chassis with the PC or expansion chassis powered.
- When plugging or unplugging the power cable, be sure to hold it by the plug itself.
- Do not use or store this product where it is exposed to any chemical either directly or as vapor in the
air.
- The specifications of this product are subject to change without notice for enhancement or quality
improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
- Do not modify this product.
CONTEC will bear no responsibility for any problems, etc., resulting from modifying the product.
- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use of or inability to use this
CONTEC product or the information contained herein.
- Do not use or store the product near equipment generating a strong magnetic field or radio waves.
It may cause malfunction.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
EAD-CE-EC
5
1. Before Using the Product
Environment
Use this product in the following environment. If used in an unauthorized environment, the board may
overheat, malfunction, or cause a failure.
Operating temperature
0 - 50°C
Humidity
10 - 90%RH (No condensation)
Corrosive gases
None
Floating dust particles
Not to be excessive
Inspection
Inspect the product periodically as follows to use it safely.
- The gold-plated leads of the bus connector
have no stain or corrosion.
～
～
- Check that the bus connector
and its cable have been
plugged correctly.
Storage
When storing this product, keep it in its original packing form.
(1) Put the ExpressCard in the storage bag.
(2) Wrap it in the packing material, then put it in the box.
(3) Store the package at room temperature at a place free from direct sunlight, moisture, shock,
vibration, magnetism, and static electricity.
6
EAD-CE-EC
2 Setup
This chapter explains how to set up the board.
Refer to the user’s manual for the expansion chassis ECH-PCI-CE-H2B as required.
What is Setup?
Setup means a series of steps to take before the product can be used.
Taking the following steps in this chapter sets up the EAD(CB)BE.
Step 1 Preparation
Step 2 Installing the Expansion Board
Step 3 Connecting the Cable
Step 4 Plugging the PC Card
Step 5 Setup and Check
If setup fails to be performed correctly, refer to “Setup Troubleshooting”.
2. Setup
EAD-CE-EC
7
2. Setup
Step 1 Preparation
Configuration image
Figure 2.1. Configuration image
Items to be prepared
-PC
- Expansion adapter
ExpressCard [BUS-PC-EC] …(a),
Connection Cable [CB-CE1] …(b)
- Expansion chassis
Chassis [ECH-PCI-CE-H2B] …(c)
AC adapter, Power cable (Bundled)
- PCI board to be installed
(c)
CAUTION
Be careful not to let screws off the PC Card when unplugging the connection cable.
8
(b)
(a)
EAD-CE-EC
Getting ready with your PC
Make sure that you have a card slot that supports ExpressCard.
Names of major parts
ExpressCard [BUS-PC-EC]
- Interface connector
(CN1)
Figure 2.2. Names of major parts < BUS-AD1C-LPE >
Step 2 Installing the Expansion Board
Refer to the user’s manual for the expansion chassis to install the expansion board on the expansion
chassis.
2. Setup
EAD-CE-EC
9
2. Setup
Step 3 Connecting the Cable
Connecting the connection cable to the PC Card
Connect the connection cable [CB-CE1] to BUS-PC-EC. Connect them together with the connector’s
flat side and PC Card’s front surface face up as shown in Figure 2.3 below.
CAUTION
Do not plug or unplug them with the PC powered.
Thumb screw
Connection Cable
ExpressCard
ExpressCard slot side
Figure 2.3. Connecting the connection cable to the PC Card
Connecting the connection cable to the Expansion Chassis
Refer to the user’s manual for the expansion chassis to connect its connection cable to the expansion
chassis.
Plugging the Power Cable
(1) Connect the power cable to the expansion chassis.
10
EAD-CE-EC
2. Setup
Step 4 Plugging the PC Card
Make sure that the PC is off and that the AC adapter is already connected, then plug the ExpressCard
[BUS-PC-EC] into the ExpressCard slot in the PC.
Check the direction of the arrow mark ▼ on the PC Card and fit it well into the PC Card slot as shown in
Figure 2.4.
For notes on unplugging the ExpressCard, refer to the manual for your PC.
Figure 2.4. Plugging the PC Card
CAUTION
Take the following precautions not to break the ExpressCard or not to cause its connector to break or
come loose.
- Do not insert the ExpressCard in reserve or by a procedure other than specified.
- Do not insert the ExpressCard while holding the connection cable or its connector.
- Do not move the PC with the connection cable connector plugged.
- Do not apply excessive force to the connector of the ExpressCard, for example, by forcing the
connection cable connector off the ExpressCard.
- Do not place anything on the connection cable connector.
EAD-CE-EC
11
2. Setup
Step 5 Setup and Check
Starting the system
The expansion chassis is turned on and off in sync with the PC’s power supply.
Turning on the system
(1) Plug the power code of the expansion chassis into a wall outlet.
You do not need to press the POWER switch on the front panel (*1).
(2) The power supply of a PC is turned ON.
(3) As the PC is turned ON, the power of the expansion chassis also comes ON.
(4) Make sure that the POWER LED on the expansion chassis is on.
Turning off the system
(1) The power supply of a PC is turned OFF.
(2) The expansion chassis is turned off in synchronization with the PC’s power supply.
*1 Pressing the POWER switch on the front panel of the expansion chassis turns on the
expansion chassis or puts it to sleep.
Use the switch, for example, to turn on only the expansion chassis.
CAUTION
- Do not turn on or off the expansion chassis with the PC main unit powered.
Doing so cancels the detection of the bus adapter. When turning the expansion chassis on back,
restart the PC main unit.
12
EAD-CE-EC
2. Setup
Setting up the hardware in Windows
At startup of Windows, the PCI-to-PCI Bridge used by the Expansion Chassis are detected in sequence
and identified automatically by the Windows standard driver.
After that, the PCI boards installed on the Expansion Chassis are detected in sequence.
For setting up and checking the boards used on the expansion chassis, refer to their respective manuals.
Checking the hardware in Windows
You can use Device Manager to check whether the Expansion Chassis has been identified in Windows.
Device Manager shows “PCI standard PCI-to-PCI bridge” under “System devices”.
Figure 2.5. Sample screen shot of Device Manager
EAD-CE-EC
13
2. Setup
Setup Troubleshooting
Please confirm followings when EAD-CE-EC does not work.
Symptoms and Actions
The chassis won’t be turned on.
a. Make sure that the power cable has been connected correctly.
b. Make sure that the power supplies of the PC and expansion chassis are on.
c. Make sure that you have followed the procedure in Chapter 2.
d. Even though the chassis is still not turned on, check whether it is turned on with no board installed.
If the chassis is turned on with no board installed, check the total current consumption by the
installed boards. The total current consumption must not exceed the power capacity of the
expansion chassis.
No PCI board on the expansion chassis is detected.
e. Make sure that the ExpressCard [BUS-PC-EC] has been connected correctly.
f. Make sure that the connection cable [CB-CE1] has been installed correctly. When connecting the
connection cable to the main chassis, insert the connector until it clicks into place.
g. Make sure that the POWER LED on the expansion chassis is turned on.
g
b
a
The photo is of the
14
EAD-CE-EC + ECH-PCI-CE-H2B.
e
EAD-CE-EC
3 About Hardware
Hardware specification
BUS-PC-EC
Table 3.1. Specification of BUS-PC-EC
Item Specification
Compatible PC card slot ExpressCard Standard Release 1.1
Outside dimensions (mm)
Power consumption (Max.) 3.3VDC 50mA (Max.)
Usable condition 0 - 50°C, 10 - 90%RH (No condensation)
Weight
*1: Power is supplied from the PC’s main unit.
Table 3.2. Specification of CB-CE1
Item Specification
Bundled connection cable CB-CE1 (Cable length 1m)
Outside dimensions of acceptable card (Max.)
100(L) x 34(H)
40g
100(L)
3. About Hardware
EAD-CE-EC
24.13
34(H)
[mm]
15
EAD-CE-EC
User’s Manual
CONTEC CO., LTD. August 2007 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/
Chinese http://www.contec.com.cn/
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD. [08232007]
[08232007] Management No. A-51-497
Parts No. LYHT681
Loading...