Contec Combi 08A pulse User Manual

User

UserManual

ElectronicSphygmomanometer

M anual

Manual

■Toassurethecorrectuseoftheproductsafetymeasures,pleasecarefullyreadusermanual

beforeusing.

■Afterreading,pleasevalidlykeepingtoreferandconsultatanymoment.

Contents

Chapter1 Safety Precautions: ....................................................................................................... 1

Chapter2 Main Unit ...................................................................................................................... 3

Chapter3 Button Functions ........................................................................................................... 4

Chapter4 External Interfaces ........................................................................................................ 4

Chapter5 Dry Battery/AC Adapter Installation ............................................................................ 5

5.1 Dry Battery Installation ..................................................................................................... 5

5.2 Using The AC Adapter ...................................................................................................... 5

Chapter6 Setting The Date And Time ........................................................................................... 6

Chapter7 Unit ............................................................................................................................... 7

Chapter8 User Switch ................................................................................................................... 7

Chapter9 Applying the Arm Cuff ................................................................................................. 7

Chapter10 BP Measurement ......................................................................................................... 8

10.1 Accurate Measurement Way ............................................................................................ 8

10.2 BP Measurement .............................................................................................................. 9

Chapter11 Memory Function ...................................................................................................... 10

11.1 Review The Memory Value ........................................................................................... 10

11.2 Delete Memory Values ................................................................................................... 11

Chapter12 Alarm Function ......................................................................................................... 11

Chapter13 SpO2 Measurement Function(Separate Sale) ........................................................... 12

Chapter14 Monitoring Procedure ............................................................................................... 13

Chapter15 Maintenance and Cleaning ........................................................................................ 14

Chapter16 Installation Of The Software ..................................................................................... 15

16.1 Demand Of Editor ......................................................................................................... 15

16.2 Installation Of Software ................................................................................................ 15

Chapter17 Keys And Symbols .................................................................................................... 16

Chapter18 Error Message ........................................................................................................... 16

Chapter19 TROUBLESHOOTING ............................................................................................ 18

Chapter20 Clean And Maintenance ............................................................................................ 19

Chapter21 NIBP Specification ................................................................................................... 21

Chapter22 SpO2 Specification ................................................................................................... 23

I

C

hapter1

C

hapter1

C

C hapter1

hapter1 Safety

Before use, carefully read "Safety Precautions" for a correct use.



To prevent users suffered hurt or damnification due to improper use, see "Safety



Precautions", and use this product properly.

For safety reasons, be sure to comply with safety precautions.

If not to use correctly, it exists that a potentially hazardous situation which may result in injury to

Please hand measurement results to the doctor who know your health to accept diagnosis.

For severe blood circulation disorder or arrhythmia patients, please use the device under the

Otherwise it may lead to acute hemorrhage, or measurement error as a result of squeezed arm.

This device is intended for using in measuring blood pressure and pulse rate.

Do not disassemble or attempt to repair the unit or components without permission.

Safety

Safety Precautions:

the user or patient or damage to the equipment or other property .

Self-diagnosis and treatment using measured results may be dangerous.

Contact your physician for specific information about your blood pressure.

Otherwise it is possible that measurement result is incorrect.

Precautions:

Note

Follow the instructions of your physician.

guidance of a doctor.

Do not use for any other purpose.

Otherwise it may cause accident or holdback.

Please use special cuff.

Otherwise it can not measure correctly.

Operation for AC Adapter (Separate Sale)

Please use sold separately dedicated AC adapter.

Otherwise it may cause trouble.

Sold separately dedicated AC adapter be sure to use a separate socket.

Otherwise it may cause electric shock or injury.

When there is breakage of sold separately dedicated AC adapter plug or wire ,

please immediately pulled the plug from the socket.

Otherwise it may cause electric shock or injury.

Do not plug or unplug the adapter power cord with wet hands.

Otherwise it may cause electric shock or injury.

Note

1

Operation for battery

Note

Please use 4 "AA" size manganese or alkaline batteries, do not use batteries of other types.

Otherwise it may cause fire.

New and old batteries, different kinds batteries can not be confusion.

Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic

Sphygmomanometer .

+ and - polarities of the batteries must match the polarities of the battery compartment as

indicated. When the batteries power exhausts , replace with four new batteries at the same time.

Please take out the batteries when you do no t use the device for a long time .

Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic

Sphygmomanometer .

If battery fluid should get in your eyes, immediately rinse with plenty of clean water.

Contact a physician immediately.

Otherwise it will cause blindness or other hazards.

If electrolyte of the batteries immodestly glues on the skin or the clothes,

immediately rinse with plenty of clean water.

Otherwise it may hurt the skin.

Advice

Do not subject the device to strong shocks, such as dropping the unit on the floor.

Do not inflate before the cuff wrapps around the arm

Do not inflect the cuff and the air tube forcibly

This device is intended for using in measuring blood pressure and pulse rate in the adult ,

pediatric and neonatal population.

Warning

Please

Please use

message

message shown

actions

actions according

neonatal

neonatal population

please

please make

use

the

use

the

use the

the device

shown

shown on

according

according to

population

population ,

make

sure

make

sure

make sure

sure to

device

device on

on

on the

on

on the

the

screen.

the

screen.

the screen.

screen. Read

to

the

manual

to

the

manual

to the

the manual

manual when

,

measurement

,

measurement

, measurement

measurement should

to

select

to

select

to select

select the

the

adult

the

adult

the adult

adult object

Read

Read the

the

right

the

right

the right

right user

object

object who

the

the user

when

when something

should

should be

user

user mode

who

who can

user

user manual

something

something wrong

be

be only

mode

mode and

can

read

can

read

can read

read the

manual

manual before

only

only performed

and

and cuff

before

before use

wrong

wrong with

performed

performed by

cuff

before

cuff

before

cuff before

before use

the

the user

use

use the

with

with the

user

manual

user

manual

user manual

manual and

the

device

the

device

the device

device in

the

device.

the

device.

the device.

device. For

by

qualified

by

qualified

by qualified

qualified personnel.

use

.

use

.

use .

.

For

For pediatric

and

the

and

the

and the

the error

in

order

in

in order

personnel.

personnel. And

to

order

to

order to

to take

pediatric

pediatric and

error

take

And

and

2

Chapter2

Chapter2 Main

The production is in the package. Open the package and confirm whether the production is

whole.

Cuff Plug

Cuff Air Plug

Main

Main Unit

Unit

Display

UP/DOWN Button

MEMORY Button

AC Adapter Jack

MENU Button

USER SWITCH Button

ON/OFF Button

START/STOP Button

Accessories

Accessories ：

Adult

Cuff

Adult

Cuff

Adult

Adult Cuff

Cuff Dry

(Specification: limb circumference 22-32cm (middle part of upper arm), please choose suited

cuff when measuring pediatric or other).

USB Data Line Software CD User Manual

Separate Sale :

AC Adapter

InputAC 100-240V 50 - 60Hz AC 500 mA

Output DC 6.0V 1.0A

Dry

Battery

Dry

Battery

Dry Battery

Battery

USB Plug Jack

S p O

Probe Y10UCH150

2

S p O

Measurement Range 35%~100 %

2

Measurement Accuracy 70%~100% ± 2%

Pulse Measurement Range 30~250bpm

3

Chapter3

Chapter3 Button

All the operations to the Electronic Sphygmomanometer are through the buttons. The names of

the buttons are above them. They are:

ON/OFF

【 ON/OFF

ON/OFF 】 Hold the button to start or close the device.

【 START/STOP

When measuring, press to cancel the measurement and deflate the cuff.

pressing any button will carry on corresponding function, eg: 【 MENU 】【 ENTER 】【 LIST 】 etc.

Up and down buttons respectively carry on the functions of moving the cursor up and

down, changing the parameters and switching the status.

Button

Button Functions

START/STOP

START/STOP 】 Press to inflate the cuff and start a blood pressure measurement.

The three buttons correspond with the hint in the LCD screen downside,

Functions

Chapter4

Chapter4 External

Note

Please

Please hold

The right side of the instrument is USB socket and AC adapter socket.

hold

hold the

External

External Interfaces

the

air

plug

to

the

the air

air

air plug

plug

plug to

① USB socket

remove

to

remove

to remove

remove the

Interfaces

the

NIBP

the

NIBP

the NIBP

NIBP cuff.

① Cuff Socket

cuff.

left side

② AC adapter socket

right side

4

Chapter5

Chapter5 Dry

The production can use dry battery or AC adapter as power source.

5.1

Dry

5.1

Dry

5.1

5.1 Dry

Dry Battery

1 Press the ▲ indicator on the battery cover and slide the cover off in the direction of the

arrow.

2 Install 4 "AA" size dry batteries so the +(positive) and 一 (negative) polarities match the

polarities of the battery compartment as indicated.

3 Replace the battery cover.

Dry

Battery/AC

Dry

Battery/AC

Dry Battery/AC

Battery/AC Adapter

Battery

Battery Installation

Installation



Adapter

Adapter Installation

Installation





Icon “ ” : the batteries power will exhaust.

Replace with four new batteries (the same sort) at the same time.

Turn the unit off before replacing the batteries.

Note

Dispose

Dispose of

5.2

5.2 Using

1 Connect device and the AC Adapter. Insert the AC Adapter Plug into the AC Adapter Jack

on the right side of the device.

2 Plug the AC Adapter into a AC outlet.

① Hold

remove

remove by ② Remove

Please

Please be

of

of the

Using

Using The

Note

Hold

and

Hold

and

Hold and

and pull

by

by pulling

Remove

Remove the

be

be sure

the

batteries

the

batteries

the batteries

batteries according

The

AC

The

AC

The AC

AC Adapter

pull

the

pull

the

pull the

the Housing

pulling

pulling on

the

the AC

sure

sure to

on

on the

AC

Adapter

AC

Adapter

AC Adapter

Adapter plug

to

use

to

use

to use

use dedicated

according

according to

Adapter

Housing

Housing to

the

cord.

the

cord.

the cord.

cord.

plug

plug from

dedicated

dedicated AC

to

applicable

to

applicable

to applicable

applicable local

to

remove

to

remove

to remove

remove the

from

the

from

the

from the

the unit.

AC

adapter.

AC

adapter.

AC adapter.

adapter.

local

local regulations

the

AC

the

AC

the AC

AC Adapter

unit.

regulations

regulations about

Adapter

Adapter from

from

from the

about

environmental.

about

environmental.

about environmental.

environmental.

the

electrical

the

electrical

the electrical

electrical outlet.

outlet.

outlet. Do

Do

Do not

not

Note

You'd

You'd better

damage

damage to

better

better take

to

to the

take

take off

the

AC

the

AC

the AC

AC adapter,

off

batteries

off

batteries

off batteries

batteries when

adapter,

adapter, you

when

when use

you

should

you

should

you should

should use

use

the

use

use the

use

use batteries

AC

the

AC

the AC

AC adapter

batteries

batteries to

5

adapter

adapter as

to

run

to

run

to run

run the

as

power

as

power

as power

power source.

the

device.

the

device.

the device.

device.

source.

source. If

If

there

If

there

If there

there is

is

is any

any

When

When adapter

consumed.

consumed. Switch

the

the device

adapter

adapter and

device

device may

may

may shutdown

Switch

Switch adapter

and

batteries

and

batteries

and batteries

batteries are

adapter

adapter and

shutdown

shutdown due

are

are both

and

and battery

due

to

due

to

due to

to power

both

used

both

used

both used

used at

battery

battery as

power

power failure.

as

as power

failure.

at

the

same

at

the

same

at the

the same

same time,

power

power supply

supply

supply when

time,

time, the

when

when the

the

battery

the

battery

the battery

battery power

the

device

the

device

the device

device is

power

power will

will

will not

is

off,

otherwise,

is

off,

otherwise,

is off,

off, otherwise,

otherwise,

not

not be

be

Chapter6

Chapter6 Setting



It is necessary to set date and time after turning on the device.



The Electronic Sphygmomanometer automatically stores measurement results with date and



time.



If dry battery power exhausts or removed, then, after the device turned on, the date resumes



from the last setting value and the time from 00:00:00, set the date and time again.

The Electronic Sphygmomanometer stores the measure results of three users automatically, and

up to 100 items for every user. The results can be uploaded to PC via USB and processed with

the PC software. If the date and time are set correctly, the date and time when measuring will be

correct in the memory, otherwise it may not be correct.

Note

Correctly

Correctly use

1. Turn on the device to enter the main interface shown as the follow:

use

data

use

data

use data

data upload

Setting

Setting The

upload

upload function:

The

The Date

function:

Date

Date And

And

And Time

Time

2. Press 【 MENU 】 button to enter 【 SYSTEM MENU 】 and select 【 SYSTEM TIME 】 item

in system menu. The current time will be displayed:

3.Press 【 UP 】 or 【 DOWN 】 buttons to set date and time.

4. After setting, select 【 CONFIRM 】 item and press 【 ENTER 】 button to confirm the setting value. If you do not want to change the time, select 【 EXIT 】 item and press 【 ENTER 】 button

to return the previous menu.

Note

Please

Please choose

IEC60950,

IEC60950, or

choose

choose the

or

or else

the

computer

the

computer

the computer

computer which

else

it

may

else

it

may

else it

it may

may damage

which

which should

damage

damage the

should

should be

the

device.

the

device.

the device.

device.

be

ensured

be

ensured

be ensured

ensured compliance

6

compliance

compliance with

with

the

with

the

with the

the requirements

requirements

requirements of

of

Chapter7

Chapter7 Unit

There are two units: "mmHg" and "kPa".

The default is: "mmHg". To switch "mmHg" and "kPa" units, enter the 【 SYSTEM SETUP 】 submenu in 【 SYSTEM MENU 】 , and complete switching in 【 UNIT 】 item.

Unit

Chapter8

Chapter8 User

The Electronic Sphygmomanometer stores the measure results of three users automatically, and

up to 100 items for every user. Press 【 USER 】 button in main interface to switch users. Or press 【 USER PURVIEW 】 item in 【 SYSTEM SETUP 】 menu to switch users.

Note

When

the

When

the

When

When the

the 【 USER

main

interface;

main

interface;

main

main interface;

interface; when

User

User Switch

USER

USER PURVIEW

when

when set

Switch

PURVIEW

PURVIEW 】 is

set

set to

to

a

certain

to

a

certain

to a

a certain

certain user,

is

is set

set

set to

user,

user, it

to

be

to

be

to be

be 【 ALL

it

it will

ALL

ALL 】 ,

will

will not

not

not be

,

current

,

current

, current

current user

be

able

be

able

be able

able to

user

user can

to

switch.

to

switch.

to switch.

switch.

can

can be

be

switched

be

switched

be switched

switched under

under

Chapter9

Chapter9 A

When measuring, take the thick clothes off instead of rolling up the sleeves.

In order to measure accurately, pay attention to applying the cuff properly (left arm).

A

pplying

A

pplying

A pplying

pplying the

The measurement can be carried out by applying the cuff on left or right arm.

Remove tight-fitting clothing from your upper arms.

Carry out the operation in a room with comfortable temperature.

the

the A

A

rm

C

A

rm

A rm

rm C

C

C uff

7

uff

1 Make sure the air plug is securely inserted in the main unit.

2 Stretch cuff into a barrel for the arm can conformable enter into the barrel.

3 Arm penetrate throught the cuff, the air tube of the cuff will pass the top of your palm.

4 Apply the cuff to your upper arm. The color marker is on the inside center of your arm and

make the air tube aligned with your middle forger.

5 The bottom of the cuff should be approximately 2cm~3cm above your elbow.

6 Be fixed with cloths, and wrapped tight cuff, the arm and the cuff should not have gaps.

Chapter10

Chapter10 BP

10.1

Accurate

10.1

Accurate

10.1

10.1 Accurate

Accurate Measurement

BP

Measurement

BP

Measurement

BP Measurement

Measurement

Measurement Way

Way

Measurement in quiet and relaxing state.

1.Place your arm on a table.

2.The cuff is level with your heart.

3.The palm of the hand is up, and the body relax.

8

Try

to

Try

Try to

measurement.

10.2

10.2 BP

 Press 【 START/STOP 】 button to take a measurement.

measure

to

measure

to measure

measure your

The high and low location of cuff will cause changes in measurement results.

Do not touch Electronic Sphygmomanometer , cuff and windpipe during

Measurements

Measurements should

Remain still 4~5 minutes before measurement.

Relax the body, do not let the muscle activity.

Do not talk and movement during the measurement.

Wait 4~5 minutes between measurements .

Do not use a cellular phone near the device .

BP

Measurement

BP

Measurement

BP Measurement

Measurement

your

blood

your

blood

your blood

blood pressure

pressure

pressure at

and

the

and

the

and

and the

the same

should

should be

same

same pose

be

taken

be

taken

be taken

taken in

at

the

same

at

the

same

at the

the same

same time

pose

for

pose

for

pose for

for consistency.

in

a

in

a

in a

a quiet

consistency.

quiet

quiet place

time

time each

place

place and

each

each day

and

and the

day

day with

the

the body

with

the

with

the

with the

the same

body

relax.

body

relax.

body relax.

relax.

same

same arm

arm

Start measurement measurement result

During measurement, please keep correct pose and quiet state, do not move.

Stop

Measurement

Stop

Measurement

Stop

Stop Measurement

Measurement

D uring measurement, if you wish to stop measuring, p ress 【 START/STOP 】 button to stop and

deflate .

 Confirm Measurement Value

Measurement value can be automatically stored.([using memory function] refer to 10 page)

* Self-diagnosis and treatment using measured results may be dangerous. Follow the instructions

of your physician.

Note

Wait

4-5

Wait

Wait 4-5



When repeated measurements, because, the arm appears congestion, it may not get correct blood

pressure measurement. After the blood flow, take a measurement once again.



When some factors affect the measurement results in measurement process, error messages



hints will appear on the screen, you can obviate the malfunction and re start a measurement.

minutes

4-5

minutes

4-5 minutes

minutes between

between

between measurements.

measurements.

 In no physiological alarm state, press any button to carry on the corresponding button function;

9

in audio alarm state, press any button (excep t 【 ON/OFF 】 button ) to clear up the audio alarm. ④ Take off the cuff, hold 【 ON/OFF 】 button to turn the device off.

*The device will automatically turn off after two minutes in which there is no operation to the

device , even if you forget to turn the power off.

Chapter11

Chapter11 Memory

The device r is designed to store and display the blood pressure, pulse rate values and the dat e and

time when measure d , which are up to 100 items . I f there have been 100 items store d, when the

101 measurement have been taken, the earliest results are deleted.

11.1

Review

11.1

Review

11.1

11.1 Review

Review The

1.In the main interface (interface when boot-strap), press 【 MEMORY 】 button to review the

most recent measurement values in large-print with the serial number from 1 to 100.

2. Press 【 UP 】 / 【 DOWN 】 button to circularly switch the former measurement values.

Memory

Memory Function

The

Memory

The

Memory

The Memory

Memory Value

Function

Value

*The right figure shows that there is no Measurement result.

3.Press 【 LIST 】 button to switch to data table interface.

4.Press 【 TREND 】 button to display trend interface.

10

5. Finish display ing the measurement values Press 【 EXIT 】 to return the main interface or hold 【 ON/OFF 】 button to turn the power off.

* The device will automatically turn off after two minutes in which there is no operation to the

device , even if you forget to turn the power off.

11.2

Delete

11.2

Delete

11.2

11.2 Delete

Delete Memory

User s can delete a ll values stored in the memory of each user separately instead of deleting a

special item .

1.Press 【 MENU 】 button to enter 【 SYSTEM MENU 】 , select 【 DELETE

enter its interface , in which select the user whose data will be deleted . A ll measurement results of

selected user will be deleted after confirm

Memory

Memory V alues

Values

DATA

】 item and

2.Finish Operation Select 【 CONFIRM 】 or 【 EXIT 】 to return the previous menu, or hold 【 ON/OFF 】 button

to turn the power off.

* The device will automatically turn off after two minutes in which there is no operation to the

device , even if you forget to turn the power off.

Chapter12

Chapter12 Alarm

Alarms are classified into two categories : technical alarm and physiological alarm.

P

hysiological

P

hysiological

P

P hysiological

hysiological A

User can press 【 MENU 】 button to enter system menu, select 【 ALARM SETUP 】 item to enter

its interface, and then set alarm on-off and the high and low alarm limits, when blood pressure is

higher than the high limit or lower than the low limit, the physiological alarm will occur.

Alarm

Alarm Function

A

larm

A

larm

A larm

larm

Function

11

Press any button to cancel the alarm in physiological alarm state and this method brings no

affection to the next alarm .To c lose alarm in 【 ALARM SETUP 】 will disable the alarm

function until switch alarm on .

T

echnical

T

echnical

T

echnical

echnical A

When power is about to exhaust and alarm is o n , the n the alarm will occur . Th is alarm can not

be cancelled unless being close d or the power replace d .

A

A larm

larm

Chapter13

Chapter13 SpO

Please

Please pay

◎ Pulse

◎ ES (Electrosurgery) equipment wire and S p O ◎ Do not put the sensor on extremities with arterial catheter or venous syringe. ◎ Do not perform S p O

reading of S p O

pay

attention

pay

attention

pay attention

attention to:

Pulse

oximeter

Pulse

oximeter

Pulse oximeter

oximeter can

Met-Hb

Met-Hb or

because obstruction of blood flow during NIBP measuring may adversely affect the

or

or dye

SpO

can

can overestimate

dye

dilution

dye

dilution

dye dilution

dilution chemicals.

value.

2

◎ Make sure the nail covers the light window. ◎ the wire s hould be on the backside of the hand. ◎ S p O

Measurement

Measurement Function(

2

to:

Warning

overestimate

overestimate the

chemicals.

measuring and NIBP measuring on the s ame arm at one time,

2

value is always displayed in the fixed place.

2

the

the S

S

p

S

p

S p

p O

Function(

Function( Separate

O

value

in

O

value

O

value

value in

2

cable must not be tangled up.

2

Note

the

in

the

in the

the presence

Separate

Separate Sale

presence

presence of

of

of Hb-CO,

Hb-CO,

Sale

Sale )

)

12

Warning

Check

◎ Check

Check if

S

p

O

S

p

O

S

S p

p O

O

Do

◎ Do

Do not

you

you shall

◎ Prolonged and continuous monitoring may increase jeopardy of unexpected change of dermal

condition such as abnormal sensitivity, erubescence, vesicle, repressive putrescence, Particularly

in newborns or in a Perfusion disorders and changes or immature skin form of the patient.

According to skin quality change, correct optical path alignment and attachment methods to

regularly check the place of S p O

skin decline. More frequent examinations may be required for different patients.

Chapter14

Chapter14 Monitoring

1. Attach the sensor to the appropriate site of the patient finger as following figure.

if

the

if

if the

probe

probe cable

2

not

use

not

use

not use

use the

shall

return

shall

return

shall return

return it

sensor

the

sensor

the sensor

sensor cable

cable

cable from

the

the S

it

it to

cable

is

in

cable

cable is

from

the

from

the

from the

the socket,

S

p

O

probe

S

p

O

probe

S p

p O

O

probe

probe once

2

to

the

vendor.

to

the

vendor.

to the

the vendor.

vendor.

Monitoring

Monitoring Procedure

normal

is

in

normal

is in

in normal

normal condition

socket,

socket, the

the

the interface

once

once the

probe, and change the attachment position when the quality of

2

condition

condition before

interface

interface will

the

package

the

package

the package

package or

Procedure

before

before monitoring.

will

will return.

or

or the

monitoring.

monitoring. After

return.

the

sensor

the

sensor

the sensor

sensor is

After

After unplugging

is

found

is

is found

damaged.

found

damaged.

found damaged.

damaged. Instead,

unplugging

unplugging the

Instead,

the

place S p O

2. Plug the connector of the S p O

The main interface will switch to S p O

which is changeable according to different individual pulse rate. This operation brings no

affection to other functions.

Warning

U

ncomfortable

U

ncomfortable

U

U ncomfortable

ncomfortable or

the

m

icrocirculat

the

m

icrocirculat

the

the m

m icrocirculat

icrocirculat ion

applied

applied to

Measurement

Measurement Limitations

During

During operation,

 High-frequency electrical noise, including noise created by the host system, or noise from

 Intravascular dye injections.

 Excessive patient movement.

to

to the

operation,

operation, the

external sources, such as electrosurgical apparatus connected to the system.

the

same

the

same

the same

same finger

Limitations

or

painful

or

painful

or painful

painful feeling

ion

barrier

ion

barrier

ion barrier

barrier patients.

finger

finger for

the

accuracy

the

accuracy

the accuracy

accuracy of

probe cable into the USB socket in the lower right of the device.

2

interface. The update period of data is less than 5 seconds,

2

feeling

feeling may

for

for over

may

appear

may

appear

may appear

appear if

patients.

patients. It

over

2

over

hours.

2

hours.

over 2

2 hours.

hours.

of

oximeter

of

oximeter

of oximeter

oximeter readings

It

is

It

is

It is

is recommended

2

if

using

using the

can

can be

the

the device

be

be affected

if

if using

recommended

recommended that

readings

readings can

13

device

ceaselessly,

device ceaselessly,

ceaselessly,

ceaselessly, especially

that

the

that

that the

affected

affected by:

sensor

the

sensor

the sensor

sensor should

by:

especially

especially ,

should

should not

not

,

, for

not

not be

for

be

 External light radiation.

 Improper sensor installation or incorrect contact position of the patient.

 S p O

 Placement of the S p O

 Significant concentrations of dysfunctional hemoglobin, such as carboxyhemoglobin and

 S p O

 Bad circular injection of the part being measured.

 It is required to use S p O

probe temperature (optimal temperature between 28 ° C and 40 ° C).

2

probe on an extremity that has a blood pressure cuff, arterial catheter,

2

or intravascular line.

methemoglobin.

too low.

2

probe which is provided by our company, contact with our sale

2

department when changes S p O

probe.

2

Chapter15

Chapter15 Maintenance

Warning

Take

cuff

Take

Take cuff



Cleaning:



the S p O

luminotron and receiving unit.



reagent. However, connector of the S p O

and

cuff

and

cuff and

and the

Caution

Do not subject the sensor to autoclaving.

Do not immerse the S p O

Do not use any S p O

Use a cotton ball or a soft mull moistened with hospital-grade ethanol to wipe the surface of

probe , and then dry it with a cloth. This cleaning method can also be applied to the

2

The cable can be cleaned with 3% hydrogen dioxide, 70% isopropanol, or other active

Maintenance

Maintenance and

the

power

the

power

the power

power source

source

source off

2

probe or cable that may be damaged or deteriorated.

2

and

Cleaning

and

Cleaning

and Cleaning

Cleaning

off

before

off

before

off before

before cleaning

probe into any liquid.

cleaning

cleaning the

probe shall not be subjected to such solution.

2

the

unit

the

unit

the unit

unit or

or

or the

the

the S

S

p

O

probe.

S

p

O

probe.

S p

p O

O

probe.

2

14

Chapter16

Chapter16 Installation

16.1

Demand

16.1

Demand

16.1

16.1 Demand

Demand Of

Pentium IV 1.8G or more

Operation System:Windows XP

EMS memory: 256 M or more

Hard Disk: 40G or more

Display: 17 inch or more

CD-ROM

USB: 2 or more

Resolution of printer: 600 DPI

16.2

Installation

16.2

Installation

16.2

16.2 Installation

Installation Of

1.Place the CD-ROM in the CD-ROM compartment located on your computer.

2.If Auto Play for CDs is enabled, place CD in reader and follow instructions when they appear

in the screen; otherwise follow install instructions below:

1.Open Windows Explorer.

2.Click on the root CD-ROM directory.

3 .Follow the instructions in the screen.

Installation

Installation Of

Of

Editor

Of

Editor

Of Editor

Editor

Of

Software

Of

Software

Of Software

Software

Of

The

Of

The

Of The

The Software

Software

Refer to "Software Help"for details about the operation method of the PC software.

15

Chapter17

Chapter17 Key

Signal Description

SYS Systolic pressure

MAP MAP pressure

DIA Diastolic pressure

PR Pulse rate (bpm)

ADU Adult

PED Pediatric

NEO Neonatal

INFO Information

Key

Key s

s

And

s

And

s And

And Symbols

Warning – See User Manual

Open the alarm sound indication

Symbols

Close the alarm sound indication

Low-power

Full-power

1.no NIBP data to review

2.no finger inserted to SpO

3.An indicator of signal inadequacy

Class Ⅱ equipment

WEEE (2002/96/EC)

BF Applied Part

SN

SN Serial number

USB or connect S p O

probe

2

probe

2

Chapter18

Chapter18 Error

Error message will be displayed in the screen if there is something wrong when measuring. The

causes and solutions are shown as follows:

Error Message Causes Solutions

Error

Error Message

Message

16

Self-test failure

System failure

Function abnormal Please contact us

Loose cuff

Correctly connect cuff (refer to 8 page)

correctly.

Make sure the cuff plug is securely

Air leakage Cuff plug fall off

inserted in the windpipe (refer to 8 page)

Air pressure error Air pressure error Refer to the troubleshooting

The pulse signal is too weak

Cuff is not connected

Weak signal

Correctly connect cuff (refer to 8 page)

or the cuff is loose.

overpressure Cuff is blocked or squeezed Correctly connect cuff (refer to 8 page)

The signal extent is too big

Excessive movement

owing to the arm or body

Over range

moving or other reasons when

Saturated signal

measuring

Keep arm, body still, measure again

Time out It takes too much time

17

Chapter19

Chapter19 TROUBLESHOOTING

TROUBLESHOOTING

Abnormal

Phenomenons

Cuff is not connected correctly.

BP measurement

values too high or

too low.

No pressure

Cuff deflates in

short time

It can not carry on measurement when press the

measurement button

Power off suddenly

when inflating

Hold the on/off

button but can not

start the device

Cuff inflation start before press the measurement

button or never stop inflating when measuring

Cuff never deflation

Air pressure error

No press value displayed or the value unchanged or

change erratically when cuff inflated

Talk or move arms when

measuring

The turnup clothing presses the

arm

Cuff leakage Buy a new cuff

The cuff windpipe is not

correctly connected with cuff

Cuff is not inflated Stop using the device and contact us

Loose cuff Correctly apply cuff

No use for a long time, the

power of batteries can be

exhausted owing to the

changed temperature

Power of batteries can be

exhausted

The battery polarities is

reversed

No d eflation or d eflation error

or inflation without stop

Others Keep arm, body still, measure again.

Causes Solutions

Correctly connect cuff (refer to 8

page)

Keep quiet and restart a measurement

Take off the clothing which presses

the arm, and restart a measurement

Correctly connect

Switch on the power once again and

restart a measurement

Replace all four batteries with new

ones.

Replace all four batteries with new

ones.

Check the battery installation for

proper placement of the battery

polarities.

P ull out the cuff to deflate. Stop using

the device and contact us.

P ull out the cuff to deflate. Stop using

the device and contact us.

P ull out the cuff to deflate. Stop using

the device and contact us.

P ull out the cuff to deflate. Stop using

the device and contact us.

Other phenomenon

Switch on the power once again and

restart an operation.

Replace the batteries.

If no, please contact us.

18

Chapter20

Chapter20 Clean

*Please follow the instructions in the user manual. If you do not comply, our company will not

assume responsibilities of the quality.

Frequently clean the Electronic Sphygmomanometer.



If there is something dirty on the device, c lean it with a soft dry cloth.



If the unit is particularly dirty, you can clean it with a soft cloth



dampened with water or neutral detergent after the cloth can be full

twisted.

Warning

Do

not

Do

Do not



submerge

not

submerge

not submerge

submerge the

Advice

Do not use any naphtha, thinner or gas to clean.

Clean

Clean And

the

device

the

device

the device

device in

And

And Maintenance

Maintenance

in

water.

in

water.

in water.

water.

Do not attempt to clean or wash the cuff.



Keeping

Advice

Do

not

place

the

Do

not

Do

Do not



place

not place

place the

Easy to splash water areas.

Direct sunlight, extreme hot, humidity, dust, causticity gas areas.

Lean or the area which can cause vibration, impact.

Chemicals or corrosive gas storage areas.

Remove the batteries if the unit will not be used for long time .

Warning

machine

the

machine

the machine

machine in

in

the

in

the

in the

the following

following

following areas:

areas:

It

is

recommended

It

is

recommended

It

It is

is recommended

recommended that

accessories

accessories regularly,

Service

Service immediately.

In

addition,

In

addition,

In

In addition,

addition, the

and

safety

and

safety

and

and safety

safety check

regularly,

regularly, if

immediately.

the

overall

the

overall

the overall

overall check

check

check such

that

that you

if

if you

such

such as

you

check

you

check

you check

check if

you

you find

check

check of

as

the

as

the

as the

the leakage

if

there

is

if

there

if there

there is

find

any

find

any

find any

any damage,

of

the

of

the

of the

the Sphygmomanometer,

leakage

leakage current,

any

is

any

is any

any damage

damage,

damage, stop

Sphygmomanometer,

Sphygmomanometer, including

current,

current, should

19

damage

damage on

stop

using

stop

using

stop using

using it,

should

should be

on

the

on

on the

Sphygmomanometer

the

Sphygmomanometer

the Sphygmomanometer

Sphygmomanometer or

it,

and

it,

it, and

including

including the

be

only

be

only

be only

only performed

contact

and

contact

and contact

contact our

the

the NIBP

performed

performed by

NIBP

NIBP calibration

or

or the

our

Customer

our

Customer

our Customer

Customer

calibration

by

qualified

by

qualified

by qualified

qualified

the

personnel

personnel once

The

The disposal

plastic

plastic bags,

EMC

EMC declaration:

 W hen this device is installed or putted into service, EMC should be paid more attention, as

the portable and mobile RF communications equipment with higher EM interference can affect

this device .

 T he internal components and cables should not be changed,as this may decreased

IMMUNITY of the device .

 T he Electronic Sphygmomanometer should not be used adjacent to or stacked with other

equipment.

Classification:

EMC: Group I Class B. According to the MDD 93/42, the classification of this medical device: Ⅱ a . The type of protection against electroshock: Class Ⅱ equipment.

once

once every

Warning

disposal

disposal of

bags,

bags, foams

declaration:

every

12

every

12

every 12

12 months.

of

scrap

of

scrap

of scrap

scrap instrument

foams

and

foams

foams and

and

and paper

months.

instrument

instrument and

paper

boxes)

paper

boxes)

paper boxes)

boxes) should

and

its

and

its

and its

its accessories

should

should follow

accessories

accessories and

follow

follow the

the

local

the

the local

and

and packing

laws

local

laws

local laws

laws and

packing

packing (including

(including

(including batteries

and

regulations.

and

regulations.

and regulations.

regulations.

batteries

batteries ,

,

The degree of protection against electroshock: type BF applied part .

The degree of protection against ingress of water: IPX0.

According to the mode of operation: Continuous.

According to the degree of safely of application in the presence of a flammable anesthetic

mixture with air or with oxygen or nitrous oxide: Equipment not suitable for use in the presence

of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.

20

Chapter21

Chapter21 NIBP

Name Electronic Sphygmomanometer

Display 2.8'' color LCD Display

NIBP

Specifications

NIBP

Specifications

NIBP

NIBP Specifications

Specifications

Measurement Method Oscillometric method

Working modes Automatic

Measurement Range

Inflation

Alarm Range

Overpressure protect

Resolution

Pressure 1mmHg

Measurement Accuracy

Cuff Pressure Accuracy ± 3mmHg

Error

Operating

Temperature/ Humidity

Transport and Storage

Temperature/ Humidity

Atmospheric pressure 80kPa~105kPa

Battery

Battery 4 "AA" alkaline batteries, AC Adapter separately sold

Main Unit Dimensions 130 (L) *110 (W) *80 mm (H)

Main Unit Weight 300 gram

NIBP

NIBP Specification

Specification

adult 0~290mmHg （ 0~ 38.6 kPa ）

Pressure

Pulse: 40~240/min

adult 160 mmHg

pediatric 120mmHg

neonatal 70 mmHg

adult mode

pediatric mode

neonatal mode

adult mode 295 ± 5 mmHg pediatric mode 240 ± 5 mmHg neonatal mode 145 ± 5 mmHg

The BP Value of the device is equivalence with the measurement

value of Stethoscopy. The error meets all the conditions in the

ANSI/AAMI SP-10:2002+A1:2003 +A2:2006 .

+5 º C~40 º C . 15 %RH ~ 80%RH

-20 º C~+55 º C . ≤ 95%RH

pediatric 0~ 235 mmHg （ 0~ 31.3 kPa ） neonatal 0~ 14 0mmHg （ 0~ 18.6 kPa ）

SYS ALM: 40~270 mmHg

DIA ALM: 10~215 mmHg

SYS ALM: 40~200 mmHg

DIA ALM: 10~150 mmHg

SYS ALM: 40~135 mmHg

DIA ALM: 10~100 mmHg

21

Accessories

Accessories Standard Configure:

Adult Cuff: limb circumference 22-32cm (middle of upper arm )

Soft ware CD, User Manual, USB data line, four "AA" alkaline

batteries

Separate Sale :

P ediatric Cuff: limb circumference 1 0 - 19 cm (middle of upper

arm )

N eonatal Cuff: limb circumference 6 - 1 1 c m (middle of upper

arm )

AC Adapter

Input: AC 100-240V 50 - 60Hz AC 50 0 mA

Output: DC 6.0V 1.0A

22

Chapter22

Chapter22 SpO

SpO

Specification

2

Name

Model Y10UCH150

Measurement Range

Resolution

SpO

2

PR

Measurement Accuracy

SpO2,

PR ± 2bpm or ± 2% (select larger)

Measurement

Measurement Performance

pulse-filling ratio :

0.4%

Optical

Optical Sensor

Red light wavelength is 660nm , 6.65mW

Sensor

Performance

Performance In

SpO

Probe (Accessory Separate Sale)

2

SpO

Measuring Range: 0% ~ 100%;

2

Pulse Rate Measuring Range: 30bpm ~ 250bpm;

1%

1bpm

70% ~ 100% ± 2%

0% ~ 69% undefined

In

Weak

In

In Weak

SpO

error ± 4%,

2

pulse rate error ± 2bpm or ± 2% (select larger)

Filling

Weak

Filling

Weak Filling

Filling Condition

Condition

Infrared wavelength is 880nm, 6.75mW

23

Contec Combi 08A pulse User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Chapter7 Unit