Contec CF-1GB-R, CF-2GB-R, CF-4GB-R, CF-8GB-R User Manual

CompactFlash for Fix Disk
CF-1GB-R, CF-2GB-R,
CF-4GB-R, CF-8GB-R
User’s Guide
CONTEC CO.,LTD.
Follow the procedures in this guide to use the product. The product consists of the items listed below. Check, with the following list, that your package is complete. If you discover damaged or missing items, contact your retailer.
Product Configuration List
- CF Memory Card (One of the following) …1 - User’s Guide (this booklet) …1 [CF-1GB-R, CF-2GB-R, CF-4GB-R or CF-8GB-R]
Features
- Conforming to the CFA (CompactFlash Association) standard
- Capable of partitioning internal memory *1
- Containing no rotating or moving part as in hard disk drives, thus best suited for applications which require high environmental resistance (to temperature, humidity, vibration, shock) and for continuous operation for extended periods of time.
- Never making any sound such as motor rotation sound or access noise during seeking, thus best suited for applications which require complete silence.
- Capable of being used as a hard disk drive when used in an IDE-connected CF slot
- Lower in power consumption than hard disk drives
*1: Most CF cards on the market allow only one partition to be recognized in the Windows 2000 or
Windows XP environment (thus recognized as a removable drive). Even when two or more partitions are created in this product, all of the partitions can be recognized (excluding the USB card reader).
1 CF-1GB-R, CF-2GB-R, CF-4GB-R, CF-8GB-R
Specification
Item
Type Memory contents
Bus interface Transmission speed When Read/Write Power voltage Power
consumption Operating
temperature Relative
humidity Sweep resistance External dimension (mm) Weight
(sleep) (read) / (write) (Operating) (Storing) (Operating)
(Operating) 15G, half-sine shock for 11ms in X, Y, and Z directions
External dimension
CF-1GB-R, CF-2GB-R, CF-4GB-R, CF-8GB-R User’s Guide
Specification
CF-1GB-R CF-2GB-R CF-4GB-R CF-8GB-R
1GB 2GB 4GB 8GB CompactFlash (TYPE I) 10Mbyte/sec (Read) / 9Mb y t e/ se c (W ri t e ) 5VDC ±10% / 3.3VDC ±5% 4mW (Typ.) 500mW (Max.) / 500mW (Max.) 0 -70°C
-25 - 85°C 10 - 90%RH(No condensation)
(JIS C0041-compliant, IEC68-2-27-compliant)
42.8(W) x 3.3(D) x 36.4(H) About 11.4g
Side Length [mm]
A 36.40±0.150 B 42.80±0.100 C3.30±0.100 D0.63±0.070
CF-1GB-R, CF-2GB-R, CF-4GB-R, CF-8GB-R 2
CF-1GB-R, CF-2GB-R, CF-4GB-R, CF-8GB-R
Connector pin position list
1
TOP
25
User’s Guide
Pin No.
50
Pin
Pin
Name
No.
Pinouts
Pin Identification
26
Pin
Pin
No.
Name
01 VSS 14 A6 27 D11 40 N.C. 02 D3 15 A5 28 D12 41 RESET 03 D4 16 A4 29 D13 42 /WAIT 04 D5 17 A3 30 D14 43 /INPACK 05 D6 18 A2 31 D15 44 /REG 06 D7 19 A1 32 /CE2 45 DASP 07 /C E1 20 A0 33 VSS 46 PDIAG 08 A10 21 D0 34 /IORD 47 D8 09 /OE 22 D1 35 /IOWR 48 D9 10 A9 23 D2 36 /WE 49 D10 11 A8 24 /IOIS16 37 /IREQ 50 VSS 12 A7 25 VSS 38 VCC 13 VCC 26 VSS 39 CSEL
Symbol Function
D0 to D15 Data Bus(Bi-directional) A0 to A10 Address Bus(Input) /CE1, /CE2 Card Enable(In p ut ) /OE, /WE Output/Write Enable(Input) /REG Register Select(Input) /IORD, /IOWR I/O Address /IREQ, /IOIS16, RESET, CSEL, /INPACK, /WAIT, DASP, PDIAG VSS Ground VCC Vcc Power Input
BOTTOM
Pin
Pin
No.
Name
I/O Handshaking(Input/Output)
Pin
Name
3 CF-1GB-R, CF-2GB-R, CF-4GB-R, CF-8GB-R
CF-1GB-R, CF-2GB-R, CF-4GB-R, CF-8GB-R User’s Guide
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in injury or death and the destruction of equipment and resources. Understand the meanings of these labels to operate the equipment safely.
DANGER
WARNING
CAUTION
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage.
Handling Precautions
WARNING
- Do not modify the product. Doing so may cause fire, electric shock.
- If smoke or abnormal odor is detected, immediately turn off the PC and peripheral devices and unplug the power cables.
- Never touch this product with wet hands. Doing so can short-circuit the product to cause fire, electric shock, and/or failure.
CAUTION
- This is a precision product. Do not strike or bend the product. Otherwise, the CF Memory Card may malfunction.
- Do not insert any foreign matter into the connector of this product. Doing so can break the connector.
- Before handling the product, touch a metal object around to release any built-up static charge from your body to prevent the product from being damaged by static electricity.
- Do not turn off the power during disk access (writing). Doing so may break the data.
- This product is designed to be plugged only in one orientation. Do not force it to be plugged in.
- No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD.
- The information in this document is subject to change without notice.
- All relevant issues have been considered in the preparation of this document. Should you notice an omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever (including damages for loss of business profits) arising out of the use or inability to use this CONTEC product or the information contained herein.
Copyright 2005 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. December 2005 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan Japanese http://www.contec.co.jp/ English http://www.contec.com/ A-51-146 (LYFQ331) Chinese http://www.contec.com.cn/ [12292005] No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD.
Loading...