Contec BX-956SD-DCx00000, BX-956SD-DC*******1, BX-956SD-DC700000, BX-956SD-DC731314, BX-956SD-DC761314 User Manual
...
IPC Series
BOX-PC
for BX956S Series
User’s Manual
CONTEC CO., LTD.
BX-956SD-DCx00000
[Base Model]
BX-956SD-DCxxxxxx *1
[OS PreInstallModel]
Name
Pcs.
Pcs.
BOX-PC
1
1
The attachment fittings
2
2
CFast card re moval preventi on fitting
1
1*2
USB removal prevention fitting (angle)
6
6
Washer assembled screw (M3 x 6)
7
6
Washer assembled screw (M3 x 8, black)
4
4
Washer assembled and cross recessed
Cable clamp
1
2
Power supply
Power connector 1 1
Contact 4 4
DVI-analog RGB conversion adapter
1
1
Product guide
1
1
IPC Precaution List 1 1
Warranty Certificate
1
1
Serial number label 1 1
Royalty consent contract(For OS)
- *3
1
Setup Procedure Document
Recovery Media
- *3
1
Check Your Package
Thank you for purchasing the CONTEC product.
The product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or missing items,
contact your retailer.
Product C onfiguration List
hexagonal bolt (M4 x 10, black)
connector complete set
*1 Except for base model.
*2 It is attached to the main body.
*3 Not included in models without OS.
* The user's manual for this product is available as a PDF file through CONTEC’s Web site.
The user's manual provides such information as hardware settings, functions for each component, and BIOS settings.
Refer to it as necessary.
4 4
- *3 1
BX-956S User’s manual
i
Product
guide
BOX-PC The attachmen t fittings
CFast card re moval
prevention fitting *2
USB removal prevention
fitting (an gle)
Washer assembled sc rew
(M3 x 6)
Washer assembled scre w
(M3 x 8, blac k)
Washer assembled an d cross
recessed hexagonal bolt
(M4 x 10, blac k)
Power supply connector
complete set
Power connector
Contact
Cable clamp
DVI-VGA
conversion connector
Product guide
(this sheet)
IPC
Precaution
List
IPC
Precaution List
Serial n umber label
Recovery MediaSetup Procedure
Document
Setup
Procedure
Document
Royalty
consent contract
Royalty
consent
contract
Warranty Certifi cate
Warranty
Certific ate
Product C onfiguration Image
* See the Product Configuration List to check if all the components are included for the specified number of units.
Copyright
Copyright 2016 CONTEC CO., LTD. ALL RIGHTS RESERVED.
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this
document.
The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.
Trademarks
Intel, Intel Atom, Intel Core and Celeron are register ed trademarks of Int e l Corp ora tion. MS, Microsoft
and Windows are trademarks of Microsoft Corporati on. Other brand and product names are trademarks
of their respective holder.
ii
BX-956S User’s manual
Table of Contents
Check your package ............................................................................................................................. i
Copyright ............................................................................................................................................ ii
Trademarks .......................................................................................................................................... ii
Table of Cont ents ............................................................................................................................... iii
1. INTRODUCTION 1
About the Product ............................................................................................................................... 1
Features ........................................................................................................................................ 2
Supported OS ............................................................................................................................... 3
Customer Support................................................................................................................................ 4
Web Site ....................................................................................................................................... 4
Limited One-Year Warranty ............................................................................................................... 4
How to Obtai n Service ........................................................................................................................ 4
Liability ............................................................................................................................................... 4
Safety Precautions ............................................................................................................................... 5
Safety Inf orma tion ....................................................................................................................... 5
Caution on the BX-956S Series ................................................................................................... 5
Security Warn in g ................................................................................................................................ 8
2. SYSTEM REFERENCE 9
Specifications ...................................................................................................................................... 9
Power Management Features ............................................................................................................ 11
Power Requirements ......................................................................................................................... 12
Power Consumption ................................................................................................................... 12
Physical Dimensions ......................................................................................................................... 13
3. HARDWARE SE TUP 15
Before Using the Product for the First Time ..................................................................................... 15
Hardwar e Setup ................................................................................................................................. 16
Attaching the CFast Attachment Fittings ................................................................................... 16
Attaching the Attachment Fittings ............................................................................................. 17
Attaching the FG ........................................................................................................................ 17
Fastening the Cable .................................................................................................................... 18
Installation of VESA metal fittings ............................................................................................ 19
Installation Requirements ........................................................................................................... 20
4. BIOS SETUP 23
Introduction ....................................................................................................................................... 23
BX-956S User’s manual
iii
Starting Setup .................................................................................................................................... 23
Using Setup ....................................................................................................................................... 24
Getting Help ............................................................................................................................... 24
In Case of Prob l ems ................................................................................................................... 24
A Final Note About Setup .......................................................................................................... 24
Main Menu ........................................................................................................................................ 25
Setup It ems ................................................................................................................................. 25
Main .................................................................................................................................................. 26
Advanced ........................................................................................................................................... 27
ACPI Settings ............................................................................................................................. 28
Super IO Configuration .............................................................................................................. 29
H/W Monit or .............................................................................................................................. 31
CPU Configuration ..................................................................................................................... 32
PPM Configuration..................................................................................................................... 33
SATA Confi guration .................................................................................................................. 34
CSM Configuration .................................................................................................................... 35
Chipset............................................................................................................................................... 36
North Bridge ............................................................................................................................... 37
Intel IGD Configuration ............................................................................................................. 38
LCD Control ............................................................................................................................... 40
South Bridge Configuration ....................................................................................................... 41
Azalia HD Audio Configuration ................................................................................................ 42
USB Configuration ..................................................................................................................... 43
LAN Configuration .................................................................................................................... 45
Security ............................................................................................................................................. 46
Boot Configuration ............................................................................................................................ 47
Save & Exit ....................................................................................................................................... 48
5. EACH COMPONENT FUNCTION 51
Component Name .............................................................................................................................. 51
Front View.................................................................................................................................. 51
Right side view ........................................................................................................................... 51
System Configuration ........................................................................................................................ 52
Component Function ......................................................................................................................... 53
LED: POWER, ACCE SS, S TATU S ....................................................................................... 53
DC Power Input Connector: DC-IN ........................................................................................ 53
POWER SW ............................................................................................................................... 54
LINE OUT Int erface : L IN E OUT ............................................................................................. 54
MIC IN Inter f a ce : M IC ............................................................................................................. 54
DVI Interface: DVI-I ............................................................................................................... 55
USB3.0 Port : USB3.0 ................................................................................................................ 57
USB2.0 Port : USB2.0 ................................................................................................................ 57
Giga bit-Ethernet: LAN A, B .................................................................................................. 58
BX-956S User’s manual
iv
CFast Card Connector : CFast1, 2 .............................................................................................. 59
Serial Port Int erfa c e: SERIAL A, B ........................................................................................ 60
GPIO Connector: DIO ............................................................................................................. 61
6. APPENDIX 63
POST Co des ...................................................................................................................................... 63
SERIAL I/O Add res s and Register Function .................................................................................... 66
Watch-Dog-Timer ............................................................................................................................. 72
Battery ............................................................................................................................................... 76
7. LIST OF OPTIONAL PR ODUCTS 77
BX-956S User’s manual
v
BX-956S User’s manual
vi
1. Introduction
1. Introduction
About the Product
This product is a fanless computer for embedded applications. It features an Intel Atom pr ocessor E3845
chipset. Thanks to a quad-core CPU, simultaneous stable high-speed processing for four applications is
possible with four cores. This CPU also allows for computing power alm os t four times that of
conventional products in addition to three times the graphics performance, a significant improvement.
Moreover, power consumption has been significantly reduced, resulting in nearly double the power
efficiency compar ed with the pre vious generation's archi t e c t ure. This "resource-saving PC" helps you
design mor e compact, ener gy efficien t equipmen t to reduce running costs and promote energy efficiency.
It has extension interfaces such as DVI-I, 1000BASE-T, USB 2.0, USB 3.0, DIO, and serial. It employs
a CFast card for stora g e and is fanless to ensure a totally spindleless design that simplifies mai n tenance.
Embedded-type CPU have b een adopted. The use of readily available parts ensures the ease of the use of
the product . In addition, the use of Contec-customized BIOS allows support to be provided at the BIOS
level.
This product is av a ilable in the following 5 models:
- Base model with Intel Atom Processor E3845 1.91GHz
BX-956SD-DC700000 (Memory 4GB, ECC, without OS, withou t CFast)
- OS-installed model with Intel Atom Processor E3845 1.91GHz
BX-956SD-DC731314 (Memory 4GB, ECC, Windows Embedded Standard 7 RUNTIME P 32bit
BX-956SD-DC761314 (Memory 4GB, ECC, Windows Embedded Standard 7 RUNTIME P 32bit
BX-956SD-DC771314 (Memory 4GB, ECC, Windows Embedded Standard 7 RUNTIME P 32bit
(Japanese, English, Chinese, Korean), CFast Card (Q-MLC) 16GB)
BX-956SD-DC 781724 (Memory 4GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit
(Japanese, English, Chi nese, Korean), CFast Card (Q-MLC) 32GB)
(Japanese, English,Chinese, Korean), CFast Card (SLC) 16GB)
(Japanese, English, Chinese, Korean), CFast Card (MLC) 32GB)
BX-956S User’s manual
1
1. Introduction
Features
- Contributing to redu ction of running cost and promotion of energy efficiency
It adopts the low-power platform with Intel
consumption while ensuring sufficient performance.
- Design that meets the safety standard
This product, as in our other products, is designed to comply with the safety standard of VCCI, FCC, CE,
and furthermore, its s afety has been certified to meet the UL standard for Eu rope and the U.S.
- Slitless/f anless des ign that redu ces mainten ance work
This product's spindleless design eliminates the heat dissipating slit and CPU fan and adopts CF ast card
for the storage. There is no need to worry about the i ntrusion of dust or foreign objects, and the use of
parts that degrade over time is minimized to fac ilitate maintenance.
- Remote power managemen t function to reduce operation tasks
Supports system startup by external device over network (Wake-on-LAN), by general purpose input
(power on by GPI), and by modem reception (power on by ring). It encourages significant labor saving in
operation.
- Major types of peripherals are supported with rich interfaces including the two CFast card slots
It has a variety of extended interface such as DVI-I x 1, 1000BASE-T x 2, USB3.0 x 1, USB2.0 x 5,
serial (RS-232C) x 2, DIO x 1.
It has two CFast card slots, providing the ability to separate data from th e operating system, as well as the
convenience of being able to use one slot for system s tartup and the other for maintenance or for taking
home system lo g s or collect ed data.
- Falling-off prevention tools and fixing clamps provided to avoid trouble caused by disconnected cable
This product stays trouble-free, being equipped with USB removal prevention fitting and cable clamp for
connectors with no loc king mechanism, such as USB cable, and with hardware to properly mount and
avoid falling out of CFast card.
®
Atom
TM
Processor E3845 that realizes lower power
- Safety design required for embedded applications
For Windows Embedded Standard installed model or Windows 10 IoT Enterprise LTSB 2016 installed
model, it is possible to use the WF*1 function of OS. It is designed for safety required for embedding
purpose, for example, prohibiting unwanted writing to the CFast card with EWF function will relieve the
concern about the writing limits to th e CFast card and prevent an unintentional system alteration.
*1 EWF (Enhanced Write Filter) is a function of Windows Embedded St andard. U WF (U nified Wr ite Fi lter) is a function of Windows 10
IoT Enterprise LTSB 2016. They protect the disk from being actually written by redirecting the writing to RAM.
BX-956S User’s man ual
2
1. Introduction
- A wide range of power supplies (10.8 - 31.2VDC) supported
As the product supports a wide range of power (10.8 - 31.2VDC), it can be used in a variety of power
environments. The separately available AC ad apter adds su p port for 100 - 240VAC power.
Supported OS
- Windows Embedded Standard 7 32bit (Japanese, English, Chinese, Korean)
- Windows 10 IoT Enterprise LTSB 2016 64bit (Japanese, English, Chinese, Korean)
BX-956S User’s manual
3
1. Introduction
Customer Support
CONTEC provides the following support servic es f or you to use CONTEC products m or e efficiently and
comfortably.
Web Site
Japanese http: //www.contec.co.jp/
English http: //www.contec.com/
Chinese http: //www.contec.com.cn/
Latest produc t information
CONTEC provides up-to-date inform ation on products.
CONTEC also provides p r oduct manuals and variou s tec hnical documents in the PDF.
Free download
You can download updated driver software and differential files as well as sample programs available in
several languages.
Note! For product information
Contact your retailer i f you have any technical question about a CONTEC product or need its p rice,
delivery time, or estimate information.
Limited One-Year Warranty
CONTEC products are warranted by CONTEC CO., LTD. to be free f r o m defects in material and
workmanship for up to one year from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the original
invoice and a Return M erchandise Authorization to the distributor or t he CONTEC group office, from
which it was purchased.
This warranty is not applicable for scratches or normal wear, but only for the electronic ci rcu itry and
original products. The warranty is not app l icable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonable use, or if the ori ginal invoice is not included, in
which case repairs will be considered beyond the warranty policy.
How to Obtain Service
For replacement or repa ir, return th e d ev ice freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you
purchased before returning any product.
* No product will be accepted by CONTEC group without the RMA number.
Liability
The obligation of the warra ntor is solely to repair or replace the product. In no event will the warrantor be
liable for any incidental or consequential damages due to such defect or consequences that arise from
inexperienced usage, misuse, or malfunction o f t his device.
BX-956S User’s man ual
4
1. Introduction
DANGER
WARNING
C
A
U
TI
ON
W
ARNING
Safety Precautions
Understand the following definitions and precautions to use the pr o duct safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these labels
to operate the equipmen t safely.
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a pote n t ially hazardous situa tio n which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Caution on the BX-956S Series
Handling Precautions
- Always check that the power supply is turned off before connecting or disconnecting power cables.
- Do not modify the produ ct.
- Always turn off the power before inserting or removing circuit boards or cables.
- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other
applications that require a very high level of reliability. Do not use the product in such applications.
- If using this product in applications where safety is critical such as in railways, automotive, or
disaster prevention o r security syst ems, please contact your retailer.
- Do not attempt to replac e the battery as inappropriate battery r eplacement poses a risk o f explosion.
- For battery replacement, contact your retailer as it must be performed as a process of repai r.
- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws
and municipal ordinances. For details on replacing the battery, refer to the appendix.
BX-956S User’s manual
5
1. Introduction
CAUTION
- Do not use or store this product in a location exposed t o high or low temperature that exceeds range
of specification or susceptible to rapid temperature changes.
Example: - Exposure to direct sun
- In the vicinity of a heat source
- Do not use this product in extremely hu mid or dusty locations. It is extremely dangerous to use this
product with its interior penetrated by water or any other fluid or conductive dust. If this product
must be used in such an environment, install it on a dust-proof control panel, for example.
- Avoid using or storing this produc t in locations subject to s hock or vibration that exceeds range of
specification.
- Do not use this product in the vic inity of devices that genera te strong magnetic force or noise. Such
products will cause this product to malfunction.
- Do not use or store this product in the presence of chemicals.
- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.
Do not use chemicals or a vola tile solvent, such as benzene or thinner, to prevent pealing or
discoloration of the paint.
- This product’s case may become hot. To avoid being burned, do not touch that section while this
product is in operation or immediately after turning off the power. Avoid installation in a location
where people may come into contact with that section.
- CONTEC does not provide any guarantee for the integrity of data on CFast.
- Always remove the power ca ble from the power outlet b efore mounting or removing an expansion
board and before connecting or disconnecting a connector.
- Always remove the power cable from the power outlet before connecting or disconnecting a
connector.
- To prevent corruption of files, always shutdown the OS before turning off this product.
- CONTEC reserves the right to refuse to service a product modified by the user.
- In the event o f failure or abnormality (fo ul smells or excessive h eat generation), unplug the power
cord immediately and contact your retai ler.
- To connect with peripherals, use a grounded, shielded cable.
- The CFast card connector doesn't support hot plug. The pulling out opening of the CFast card cannot
be done in the state of power supply ON. Please neither pulling out opening of CFast in the state of
power supply ON of this product nor come in contact with CFast. This product may malfunction or
cause a failure.
- If you use any other CFast than our CFast, we can not guarantee this pr oduct’s specification. When
you newly select CFast for this product, you should read “Chapter 7” at first. If you select
unpreferable CFast, the system may work out of order.
- Component Life:
(1) Battery---The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.
(2) CFast --- Window installed model uses a CFast card in the OS storage area.
* Replacement of ex pendables i s handled as a r epair (there will be a char g e).
* The service life for c onsumable parts are reference valu es and are not guaranteed values.
* This product's specifications allow the device to be rebooted from the BIOS screen during startup.
This has no effect on operation after the OS boots
BX-956S User’s man ual
6
The backup ti m e at a temperature of 25°C with the power disconnect ed is 10 years or
more.
The estimated failur e r ate is 1 every 60,000 rewrites for SLC model s and 1 ever y 2,000
rewrites for MLC models and 1 every 20,000 rewrites for Q-M LC models.
1. Introduction
This equipment has been tested and found to compl y with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not i nstalled and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
NOTE
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
The caution when you register UL for your system with this product
- The Pollution Degree of UL for this product is certif ied as 2.
- Use the power supply of Limited Power Source regulated in SELV and UL/IEC60950-1.
- Install mechanical enclosures to keep an operator from touching the heat sink of this product.
- Ensure that external enclosures must work as fire enclosures.
FCC PART15 Class A Notice
BX-956S User’s manual
7
1. Introduction
Security Warning
When connecting to the network, be aware of security-related problems . See the examples of Secur ity
measures below and set up the product properly along with the network devices.
[Information security risks]
- Unauthorized access from the outside through a network could cause the system halt, data damage, or
exposure to malware
- Invaded and used as a stepping stone, a device might attack the others through networks.
(a victim becomes an assailant)
- Information might leak without realizing due to the connection to the network.
- Secondary damages such as harmful rumors, liability in damages, social credibility fall, and opportunity
loss are expec ted led by the troubles des cribed above.
*1… Malware (Malicious Software) is software that brings harm to a computer system and performs unintended oper ations.
[Security measures - e.g.]
- Do not keep using the default password. (Refer to the product manual f or the password setting) .
- Set a strong password.
⇒Combined with upper and lowercase letters, and numbers so that it cannot be easily analogized
by others.
- Change the password periodically.
- Disable unnecessary network services and functions.
- Restrict access to the network with network devices.
- Restrict p o r ts to be released on the netw o r k with network devices.
- Create a closed network connection using such as dedicated network or VPN
*2…Inquire for setting procedure to manufacturers.
*3…VPN (Virtual Private Network): a secured network that wards off unauthorized access by protecting t he co mmunication path with
authenticat ion and e nc ryption.
*1
.
*2
*3
.
Unfortunately, there are no perfect ways to avert unauthorized access o r close a security hole that are
endlessly found day and night. Please understand that risks are always involved with the Internet
connection, and we strongly recommend a user should constantly update information security measures.
BX-956S User’s man ual
8
2. System Reference
1,600x900, 1,680x1,050, 1,920x1,080 (16,770,000 colors)
BX-956SD-DC781724: Built-in CFast card slot (Q-MLC) (32GB, 1 partition) *1
1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)
USB 2.0 compliant 5 port
Power switch signal
Time up allows reset
The real-time clock is accurate within ±3 minutes (at 25°C) per month
Supports PC98/PC99 ACPI Power management
System Reference
2.
Specifications
Table 2.1. Functional Specifications < 1 / 2 >
Model BX-956SD-DC7xxxxx
CPU Intel® Atom™ Processor E3845 1.91GHz
BIOS BIOS (mfd. by AMI)
Memory 4GB, 204pin SO-DIMM socket x 1, PC3-10600(DDR3L 1333) ECC
Graphic Intel® HD Graphics (built-in CPU)
640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,
Analog RGB
System
resolution
DVI-D
Audio HD Audio compliant, LINE OUT x 1, MIC IN x 1
CFast card slot
1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,
1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors)
640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,
1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,
2 slot, CFast CARD Type I x 2 bootable
BX-956SD-DC700000:-
BX-956SD-DC731314: Built-in CFast card slot (SLC) (16GB, 1 partition) *1
BX-956SD-DC761314: Built-in CFast card slot (MLC) (32GB, 1 partition) *1
BX-956SD-DC771314: Built-in CFast card slot (Q-MLC) (16GB, 1 partition) *1
LAN *2
USB
Serial I/F
General-purpose I/O
Hardware monitoring Monitoring CPU temperature, power voltage
Watchdog timer
RTC/CMOS
Power Management
*1: The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized from
OS might be displayed fewer than an actual value.
Intel I210IT Controller
USB 3.0 compliant 1 port
RS-232C (general-purpose) : 2port (SERIAL PORTA, B), 9pin D-SUB connector (male)
Baud rate : 50 - 115,200bps
Non-isolated type : I/O 6 channels,
Software programmable ,255 level(1sec - 255sec)
Lithium backup battery life: 10 years or more.
Power management setup via BIOS, Power On by Ring / Wake On LAN,
BX-956S User’s manual
9
2. System Reference
Model
BX-956SD-DC7xxxxx
Display
DVI-I x 1 (29pin DVI-I connector)
MIC IN : 3.5φ Stereo mini jack, Full-scale input level 1.4Vrms(Typ.)
USB2.0 compliant 5port (TYPE-A connector x5)
RS-232C
2 port (9pin D-SUB connector [male])
General-purpose I/O
Rated input voltage
12 - 24VDC *3
voltage
External device power
(mm)
Weight
About 1.0kg (Excluding attachment fittings)
Table 2.1. Functional Specification < 2 / 2 >
Interface
Audio
CFast card slot
LAN *2 2 port (RJ-45 connector)
USB
DIO
Power supply
Range of input
Power consumption 12V 3.4A, 24V 1.8A
supply capacity
Physical dimensions
LINE OUT : 3.5φ Stereo mini jack, Full-scale output level 1.4Vrms(Typ.)
2 slot, CFast CARD Type I x 2, bootable
BX-956SD-DC700000 : -,
BX-956S D-DC731314 : Built-in CFast card slot contains a CFast card(SLC) .
BX-956S D-DCx761314 : Built-in CFast card slot contains a CFast card(MLC) .
BX-956S D-DC771314 : Built-in CFast card slot contains a CFast card(Q-MLC) .
BX-956SD-DC781724 : Built-in CFast card slot contains a CFast card(Q-MLC) .
USB3.0 compliant 1port (TYPE-A connector x1)
1 port (9pin D-SUB connector [femaie])
10.8 - 31.2VDC
CFast card slot : 3.3V : 1A(500mAx2)
USB3.0 I/F : +5V : 0.9A (900mAx1)
USB2.0 I/F : +5V : 2.5A (500mAx5)
182 (W) x 115(D) x 29(H) (No protrusions)
(16GB, 1 partition)*1
(32GB, 1 partition)*1
(16GB, 1 partition)*1
(32GB, 1 partition)*1
*2: If you use the 1000BASE-T, be careful of the operating temperature.
For more details on this, refer to chapter3, Installation Requirements.
*3: Use a power cable shorter than 3m.
BX-956S User’s manual
10
2. System Reference
Corrosive gases
None
resistance
CE Marking (EMC Directive Class A, RoHS Directive), UL/c-UL
Table 2.2. Installation Environment Requirements
Model BX-956SD-DC7xxxxx
Operating temperature
*4
Storage temperature
Humidity
Floating dust particles
(1) Horizontal installation : 0 - 50°C(With 1000BASE-T : 0 - 45°C)
(2) Vertical installation other than above : 0 - 45°C(With 1000BASE-T : 0 - 40°C)
-10 - 60°C
10 - 90%RH (No condensation)
Not to be excessive
Line noise
Ambient
specifications
*4 : For more details on this, please refer to chapter 3, “Installation Requirements”.
*5 : When AC adapter “ACAP19-01” is used.
Line-noise
resistance
Vibration
resistance
Impact resistance
Grounding
Standard
Static
electricity
Sweep
resistance
AC line / ±2kV *5,
Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G
60 min. each in x, y, and z directions
(JIS C60068-2-6compliant, IEC68-2-6-compliant)
100G, half-sine shock for 6 ms in x, y, and z directions
(JIS C0041-compliant, IEC68-2-27-compliant)
Class D grounding, SG-FG / continuity
VCCI Class A, FCC Class A,
Power Management Features
- Support both ACPI (Advanced Configuration and Power Interface) .
- ACPI v2.0 compliant
- Hardware automatic wake-up
BX-956S User’s manual
11
2. System Reference
DC Voltage
Acceptable Tolerance
+ 12V - 24V
+ 10.8V - 31.2V
Power Requirements
Your system requires a clean, steady power source for reliable performance of the high frequency CPU on
the product, th e quality of the power supp ly is even more important. For the best per formance makes sure
your power supply provides a range of 10.8 V minimum to 31.2 V maximum DC power source.
Power Consumption
For typical con figurations, the CPU card is designed to operate with at least a 60W power supply. The
power supply must meet the following requirements:
- Rise time for power supply: 2 ms - 30 ms
The following table lists the power supply’s tolerances for DC voltages:
Table 2.3. DC voltage tolerance
BX-956S User’s manual
12
2. System Reference
[mm]
M3 screw
M4 screw
CFA1
A B
A
B
DIO
CFA2
STATUS
12 - 24
VDC
CAUTION!
182
29
(6)
125
100
75
15
27.5
218
200
75
5
8-Φ5
155
140
7.5
(Maximum tapping
length:6mm)
(Maximum tapping leng th:7mm)
Physical Dimensions
BX-956SD-DCxxxxxx
*1 : The length (L) from the tip of M4 boss to the M4 screw tip should be 5mm or less. If not doing so, it may be exactly
fixed.
Figure 2.1. BX-956SD-DCxxxxxx
BX-956S User’s manual
13
2. System Reference
BX-956S User’s manual
14
3. Hardware Setup
C
AUTION
3. Hardware Setup
Before Using the Product for the First Time
Follow the next steps to set up this product :
STEP1 By referring to the in f ormation in this chapter, install, connect and set this product.
STEP2 Connect cables.
Connect the cab l e o f necessary external devices, such as keyboard an d a display, to this
product using appropriate cables.
STEP3 Turn on the power.
After verifying that you have correctly followed steps 1 and 2, turn on the power.
If you find any abnormality after turning on the power, turn it off and check to see if the
setup has been performed properly.
STEP4 Set up BIOS.
By referring to Chapt er 4, set up BIOS. This setup requires a keyboard and a display.
* B efore using this product, be sure to execute " Resto re Defaults " to initialize the BIOS
settings to their de f aul t values.
(See Chapter 4, " Save &a Exit.")
- Be sure to c onnect the keyboard and mouse to it before turning the power on for the first time.
- Be sure to connect the display before turning the power on. Connecting the display after turning the
power on may prevent it from being displayed properly.
BX-956S User’s manual
15
3. Hardware Setup
CA
UTION
Hardware Setup
- Before you start, be sure that the power is turned o ff.
- Remove only those screws t hat are explained. Do not move any other s crew.
Attaching the CFast Attachment Fitting s
(1) After inserting a CFast Card, fasten the bundled CFast attachment fitt ings with a s crew.
*1 Attached screw (M3 x 6)
Figure 3.1. Attaching the CFast Attachment Fittings
- Insert the CFast Card face up.
- Screw holes may be damaged if screws ar e tightened wi th a torque g r eater than the specified
torque.The spe c if ied tightening torque is 3 – 3.5 kgf⋅cm.
- If you use a CFast card other than the optional card, we cannot guarantee the spec ifications of this
product. To use the product within its specifications, be sure to use the optional CFast card.
- To prevent potential d amage caus ed b y static electricity, t ake appropr i ate anti-static measures (for
example, wearing an anti-static wristband) when inserting or removing the CFast card.
- Do not touch the electronic board components when inserting or removing the CFast card.
- Do not touch the terminals on the CFast card. Doing so may damage the card.
- Be careful not to mistake the orientation of the CFast card when inserting it. Also, do not use
excessive force when i nserting the CFast card. Doing so may damage the con nector.
- Do not drop or otherwise subject the CFast card to s trong impacts before insertion. Doing so may
damage the card.
BX-956S User’s manual
16
3. Hardware Setup
C
AUTION
CAUTION
Attaching the Attachment Fittings
(1) Use screws to attach the bundled attachment fittings with a screw.
Do not tighten screws with excess force.
Figure 3.2. Attaching the Attac h ment Fi ttings
- Screw holes may be damaged if screws ar e tightened wi th a torque g r eater than the specified torque.
The specified tightening torque is 5 - 6kgf⋅cm.
Attaching the FG
(1) Use screws to attach the FG.
- The FG pin of this product is connected to the GND signal of the DC power connector (DC-IN).
- Note that the connection cannot be cut off.
- Screw holes may be damaged if screws ar e tightened wi th a torque gr eater than the specified
BX-956S User’s manual
Figure 3.3. Attaching the FG
torque.The spe c if ied tightening torque is 5 - 6kgf⋅cm.
17
3. Hardware Setup
Fastening the Cable
This product comes with clamps for fixing cables.
Fastening the LINEOUT, USB Cable
(1) The system unit has a hole for attaching cable cla mp to USB (*1) rem ov al prevention fitting. Using a
cable clamp for a cable with lock-less connector, such as the LINEOUT and USB Cable, prevents the
connector from being unplugged. Use the cable ties and cable clamps appropriately according to the
connecting states and wiring directions of cables.
*1 Attached screw (M3 x 6)
Figure 3.4. Attaching the cable clamp
(2) The photo below shows an example of using a cable clamp. Fix the cable with a clamp without
applying stress to th e connector.
Figure 3.5. Using example of cable clamp
BX-956S User’s manual
18
3. Hardware Setup
VESA 75 x 75mm
Washer assembled and
cross recessed hexagonal bolt
Washer assembled screw
M4 screw
(M3 x 8)
(M4 x 8)
Surface
of
V ESA PLATE
5 MAX
M4 S CREW M4BOSS
Installation of VESA metal fittings
It corresponds to this product VESA standard. Please refer to the followin g f or the VESA installation and
the method of installing VESA mounting hardware "BX-BKT-VESA02".
*1 : The length (L) from the tip of M4 boss to the M4 screw tip should be 5mm or less. If not doing so, it may be
exactly fixed.
*2 : When you fasten the bundled attachment fittings to be fixed to the body, you should use the attached screws
(M3 x 8). Otherwise, the length (L) from the surface of the cabinet to the screw tip should be 6mm or less.
If not doing so, it may be damaged.
*3 : The liquid crystal display is possible and weight that can be the installation it is 8 kg or less possible.
Figure 3.6. Installation of VESA metal fittings
the cabine
L
t
BX-956S User’s manual
19
Loading...