Consonance Ping User Manual

PING Highend music player

USER GUIDE

Congratulations on your new Consonance !
Every Consonance product is based on a simple philosophy:
The audio reproduction instrument shall reproduce the original musical sound, purely and naturally.
It shall use Opera audio design reflecting natural music reproduction and styling to fit in with any interior.
The products shall be easy to operate and shall be manufactured according to the best quality principles.
All Consonance products are created with acoustical instruments in a concert situation as point of

reference.
The music is reproduced exactly like the original and is limited only by the quality of the recording.

Our aim is to give you the best possible music experience !

CONTENTS

Sound Advice page 2
General use page 2
Remote Control page 4
Use & Placement page 5
Cleaning page 5
Technical specifications page 6
Note & Warning page 6
Warranty page 7

SOUND ADVICE

1

Consonance PING music system is easy to connect and operate and requires no prior technical
knowledge. However, to get the most out of the system's superior sound and music quality, we have
provided a brief description of the connections and use of the system in order to provide a total music
experience.

We recommend keeping this user guide for future reference.

GENERAL USE

As an all-in-one music system, PING consist of CD-player section, amplifier section, FM/AM tuner
section and USB input section, it has got total 8 buttons on the front panel with more than 8 functions in
using.

MODE selection

Keep pushing MODE button on the left hand side of the front panel③ call the 4 modes selecting, they
are factory set with CD, INPUT, USB, TUNER orderly. Pushing CH+ or CH- button on the remote
control makes the same function.

1. CD-player section

Power on / off

Ping is switched on by pushing the button on the left hand side of the front panel①. A flashing " --

-- --" in the display indicates that power has been switched on. By pushing the same button one more
time the power is switched off. (Same function button on the remote control)

Stop / open & close
Pushing / button on the left hand side of the front panel②stop playing CD disc. Pushing button
on the remote control calls the same stop function; Pushing
front panel will open CD tray loader, and CD disc can be placed on CD tray loader⑤. To close CD tray
loader push the same button one more time. The CD tray loader can also be closed by pushing the tray
loader gently inwards. Pushing

button on the remote control calls the same open/close function.

/ button on the left hand side of the

2

Play & Pause

Pushing button on the left hand side of the front panel④start playing CD disc. If button is pushed
when a track is playing, pause mode active and indicated with flashing track and time on the screen,
one more push will start playing again from the same position on the CD track.(Same function button
on the remote control)

Previous track
Pushing
track that is playing. Each time this

button on the right hand side of the front panel⑥makes Ping jump to the beginning of the

button is pushed the playing track will move backwards one

more track and will automatically start playing from the beginning of the selected track.(Same function

button on the remote control)

Next track
Pushing the
the CD disc. Each time this

button on the right hand side of the front panel⑦makes Ping jump to the next track on

button is pushed the playing track will move forwards one more track,
and will automatically start playing from the beginning of the selected track. (Same function button on
the remote control)

2. Amplifier section

VOL-

Pushing VOL- button on the right hand side⑧calls the volume down, pushing button on
the remote control calls the same function.

VOL+

Pushing VOL+ button on the right hand side⑨calls the volume up, pushing button on the
remote control calls the same function.

MODE

Besides CD and Tuner modes, keep pushing MODE button will find INPUT for RCA connection of extra
hi-fi source,TUNER and USB for USB connection of computer based music. Pushing button CH+ or CH-
on the remote control calls the same function.

3. FM/AM tuner section

Backwards scanning

Pushing button in Tuner mode starts manual searching signals and stations backwards, lower
frequencies direction, same function for button on the remote. Each pushing order 0.1MHz
bandwidth tuning in FM mode, or 9kHz bandwidth tuning in AM mode. Keep pushing same button calls
frequencies continually scanned backwards.

Forwards scanning
Pushing button in Tuner mode starts manual searching signals and stations forwards, higher
frequencies direction, same function for button on the remote control. Each pushing order 0.1MHz
bandwidth tuning in FM mode, or 9kHz bandwidth tuning in AM mode. Keep pushing same button calls
frequencies continually scanned forwards.

Memory clear

To clear the memory of preset stations simply press the button and / button on the left hand side
of the front panel at the same time while the Ping is power off.

3