Consonance CD120 Linear User Manual

1

CD120 Linear

USER GUIDE

Congratulations on your new Consonance !
Every Consonance product is based on a simple philosophy:
The audio reproduction instrument shall reproduce the original musical sound, purely and

naturally.
It shall use Opera audio design reflecting natural music reproduction and styling to fit in with

any interior.
The products shall be easy to operate and shall be manufactured according to the best

quality principles.
All Consonance products are created with acoustical instruments in a concert situation as

point of reference. The music is reproduced exactly like the original and is limited only by the
quality of the recording.

Our aim is to give you the best possible music experience!

CONTENTS

Sound Advice page 2
General use page 2
Remote Control page 3
Use & Placement page 5
Cleaning page 5
Technical specifications page 5
Note & Warning page 6
Warranty page6

2

SOUND ADVICE

The Consonance CD120LINEAR High End CD-player is easy to connect and operate and
requires no prior technical knowledge. However, to get the most out of the player's superior
sound and music quality, we have provided a brief description of the connections and use of
the player in order to provide a total music experience.

We recommend keeping this user guide for future reference.

GENERAL USE

The CD player has only six buttons. The buttons on the front panel have 6 functions.

Power on / off

The CD-player is switched on by pushing the power button on the left hand side of the front
panel. A flashing " -- -- --" blue light in the display indicates that power has been switched on.
By pushing the same button one more time the power is switched off.

Open / close

Pushing the open/close button on the right hand side of the front panel will open the CD tray
loader, and the CD can be placed in the tray.
To close the CD tray loader push the same button one more time.
The CD tray loader can also be closed by pushing the tray loader gently inwards.

Play

Pushing the play button on the right hand side of the front panel makes the player start
playing.

Pause

If the play button is pushed when a track is playing the player will go into pause mode. One
more push at the button and the player will start playing again from the same position on the

3

CD. The pause function is indicated by the display flashing the track and time when the
pause was selected.

Stop

Pushing the stop button on the right hand side of the front panel makes the player stop
playing the CD.

Next track

Pushing the next track button on the left hand side of the front panel makes the player jump
to the next track on the CD. For every time this button is pushed the player will move one
track forward.
The player will automatically start playing from the beginning of the selected track each time
this button is pushed.

Previous track

Pushing the prev. track button on the left hand side of the front panel makes the player jump
to the beginning of the track that is playing. For every time this button is pushed the track
playing will move one track backwards. The player will automatically start playing from the
beginning of the selected track each time this button is pushed.

Additional functions available on the remote control

By using the Consonance Remote control the functions search (fast forward, fast backward
) and repeat can be selected.

fast forward

Searching fast forward is selected by holding down the

button on the remote control.

The search speed will start slow and will increase to high after some seconds.

fast backward

Searching fast backward is selected by holding down the button on the remote control.
The search speed will start slow and will increase to high after some seconds.

Repeat CD

To repeat the complete CD, press the

button once. “REP ALL” will be displayed on the

screen.

Repeat track

To repeat the track playing, press the button twice. “REP tr” will be
displayed for two seconds on the screen.
.

Cancel repeat