Up Mast S-Band
Installation
CHAPTER 9
INSTALLATION
9.1 INTRODUCTION
This chapter of the Technical manual can be used as a self-contained Installation Manual for
the SRT Up Mast S-Band Radar System and 12 feet Antenna to. It contains necessary
information, pictures and drawings to handle, assemble and install this unit as a part of the
complete Radar Equipment. Actions how to prepare this unit for the Radar Equipment Setup
Procedure are also described.
9.2 LAYOUT AND CONNECTION DIAGRAMS
MAN-SRTSUP-001 Rev.1 9.1
Up Mast S-Band
Installation
9.2.1 Layout SRT S-Band Up Mast
MAN-SRTSUP-001 Rev.1
9.2
Up Mast S-Band
Installation
9.2.2 Block diagram Selux ST radar display with SRT S-Band Up Mast radar sensor
MAN-SRTSUP-001 Rev.1
9.3
Up Mast S-Band
Installation
9.2.3 General interconnection diagram of PCBs (standard version)
MAN-SRTSUP-001 Rev.1
9.4
Up Mast S-Band
Installation
9.2.4 General interconnection diagram of PCBs (version with SRT HEATER)
MAN-SRTSUP-001 Rev.1
9.5
Up Mast S-Band
Installation
9.3 SPECIFICATIONS
9.3.1 Dimensions and weights (also see outline drawings)
Weight with 12 ft antenna
Swing circle with 12 ft antenna
9.3.2 Required power
Standard configuration
Transceiver only
With 100 KN
With 100 KN (HSC)
Medium power cunsumption 30 kW / 12 SLP
Medium power cunsumption 30 kW / 12 SLP (HSC)
9.3.3 Environmental data
Operating temperature
Storage temperature
Relative humidity
Vibrations
International Protection (IP)
Width
Depth
Height
654 mm
478 mm
765 mm
75 + 50 kg
3620 mm
115÷220 VAC - 56÷60 Hz or 48VDC
80 W
350 W
850 W
170 W
280 W
-25°°°°C / +55°°°°C As in IEC 60945
-25°°°°C / +70°°°°C As in IEC 60945
Up to 95% at + 40°°°° As for IEC
60945
As for IEC 60945
IP 66
MAN-SRTSUP-001 Rev.1 9.6