Consilium Salwico SE3000+ User Manual

Test device

Salwico SE3000+

User’s guide

çConsilium

The contents of this document are subject to revision without notice due to continued progress in methodology,
design and manufacturing. Consilium Marine assumes no legal responsibility for any error or damage resulting
from the usage of this document.

Third Edition, August 2003
Document number S-4-007.014 Version 2

© 1996-2003, Consilium Marine AB

S-402 76 Göteborg, Sweden

User’s Guide Contents i

Salwico SE3000

Contents

Contents ........................................................................................ i

Chapter 1: General ...................................................................... 2

Front view ............................................................................................ 3

Side view (right) ................................................................................... 3

Chapter 2: Functions ................................................................... 4

Power time-out .................................................................................... 4

Powered loop ....................................................................................... 4

Short-circuit loop .................................................................................. 4

Battery and power supply supervision .................................................. 4

Loop test .............................................................................................. 4

Loop unit test ....................................................................................... 4

Chapter 3: Menus ........................................................................ 5

General ................................................................................................ 5

Power on ............................................................................................. 5

Battery ................................................................................................. 5

Error messages ................................................................................... 5

Chapter 4: Tests .......................................................................... 6

Loop test .............................................................................................. 6

Loop unit test ....................................................................................... 8

Technical data ............................................................................ 10

Weight ............................................................................................... 10

Dimension.......................................................................................... 10

Adapter requirements ........................................................................ 10

Battery ............................................................................................... 10

User’s Guide Chapter 1: General 2

Salwico SE3000

Chapter 1: General

In your hand you now have a small hand hold test device for Salwico Fire
Alarm Systems, the SE3000. With SE3000 you may execute two different
tests, a loop test and a loop unit test. Before you make a test connect the test
probes to the loop, the SE3000 thereafter checks the loop to see if it is under
power. If this is not the case SE3000 connects itself to the loop and starts
testing.

If the loop is under power an error message is displayed and the SE3000 does
not connect itself to the loop.

The loop test automatically boots the complete loop and searches all addresses
on the loop. All the information found about the addresses are saved in a list,
which you can print out or scroll through on the display.

The loop unit test searches for the manually requested address and
immediately displays all information found about the unit.