Consew SR-5900 User Manual

Download

Page 1

* To use the product correctly, plese read this operation instruction carefully.

http://www.silverstar.co.kr

User's Manual

Model : SR- 5900

Steam Generator

Page 2

♠ Before use

What is vapor generator

- - - - - - - - - - - - - - - -

Names of parts of product

- - - - - - - - - - - - - - - -

Product specification

- - - - - - - - - - - - - - - - - - - -

Circuit diagram

- - - - - - - - - - - - - - - - - - - - - - - -

Product characteristics

- - - - - - - - - - - - - - - - - -

Precautions of safety use

- - - - - - - - - - - - - - - - -

♠ Use

Confirmation before use

- - - - - - - - - - - - - - - - -

Assembly and use

- - - - - - - - - - - - - - - - - - - -

Water feeding method

- - - - - - - - - - - - - - - - - -

♠ After use

Cleaning method

- - - - - - - - - - - - - - - - - - - - - -

♠ Others

Breakdown drawing

- - - - - - - - - - - - - - - - - - - - - -

Troubleshooting

- - - - - - - - - - - - - - - - - - - - - - 2

1049101311334

6∼9512

Page 3

What is SR-5900 ?

SR-5900 is composed of the vapour generated between pressure containers

that store water and generate vapours, and the iron that can perform ironing

work.This product functions with antomatism of water. Vapour generator owns

basic functions of industrial boiler. Miniaturized design is easy in installation

and convenient for use. It is the product that can improve work efficiency and

save energy, can be used safely and conveniently in common clothes factory,

mall, supermarket, tailor's shop, laundry etc..

Name of various parts of product

iron

indicating light

switch

pressure meter

power cord

steam pipe

cable holder

safety valve enclosure

fittings

Water tank

Page 4

Product specification

Circuit diagram

QS : power switch PCB : Pcb board P S/W : Switch of iron

T.F : Fuser M : Electromagnetic pump S S/W : Vapour switch of ir

H1 : Heater P : Pressure switch T. S : Thermostat of iron

LED : Indicator SOL. V : Electromagnetic valve H2 : Iron Heater

Product weight

Product dimension

Type

Vapour generator

Vapour pressure

Product name

420×250×320h

Voltage

SR-5900

120/220V~,50/60㎐

1,000W

1,500W

3.5bars

16kg

Electric iron power

Vapour generator power

PCB

Page 5

Product characteristics

♣ This product satisfies relevant technical requirements for customer's safety.

♣ This product is energy saving product improving basic energy consumption

of boiler.

♣ This vapour generator has four major safety devices.

- automatic pressure cutting switch attached

- safety valve that can discharge pressure in the vapour container in case of

excessive pressure generated because of product abnormality

- two automatic temperature controllers preventing (over temperature attached) do

you mean of over heat?

- the fuser installed internally preventing (over temperature) (over heat) beause of

failure of thermolator

♣ There are two specifications of this vapour generator, 120V and 220V.

- Before it is connected to the socket for use, whether rated voltage is consistent

with voltage required by the product must be confirmed.

♣ When electromagnetic valve is started, 2.5 ~ 4.0 BAR vapour bursts out

through the iron. If the water in pressure container is used up, no vapour

is generated.

♣ This product includes accessories of hook, measuring cup, funnel,

measuring rod etc.

♣ Refer to Page 4 for other product specifications.

Refer to Operation Instructions of the product for precautions and use method.

♣ When you are using , if water bottle without water, motor temperture

become hot, product stop work.Give the water after one hour become work.Use this product( keep water in bottle).

Repair or disassembly of the product at will is not permitte

The agent nearby must be contacted to repair!

Page 6

Precautions of safe use

♣ The following is indication of precautions marked to prevent occurance of

accidents for correct, safe use of product.which is expected to be abided by.

♣ Precautions of safe use, such as unexpected hazard caused by inadequate

use,are classified by "Warning" and "Caution" according to hazard degree and emergency situation of hazard.

Inadequate use may cau

Caution

Warning!

Power

★ Wet hand is prohibited from pulling or inserting power plug

----------------------

★ In case of power connection, the socket with earthing wire must be used.

★ In case of pulling power plug, the hand must grasp the plug. Pulling plug in same method as pulling power wire with hand is prohibited.

----------------------

To avoid electric shock caused

★ Use of power wire knotted is prohibited.

----------------------

To avoid electric shock caused

Inadequate use may

cause severe injury, light injuryor accident

even fatal accident. of product damage.

To avoid electric shock.

by wire break.

Page 7

Precautions of Safe Use

★ Power wire can not be extruded by heavy object or

product.

-----------------------

★ It must be used on the plug more than 120V/25A, 220V/15A individually.

----------------------

Many products used in the same time, may become the reason o overtemperature (over heat) and

★During use of product, safety valve should not be contacted or opened.

----------------------

Warning!

Power

Warning!

Use

120/220V

★ It should be used after confirmation of rated voltage

conforming to required voltag

of product,

----------------------

Short circuit of power wire may become the reason of electric shock and fire.

fire.

Operation of abnormal current may cause a fire.

To avoid scald.

Page 8

Precautions of Safe Use

★ It should be paid special attention to that use, or contact by children should be prevented.

----------------------

★ During product use, spraying at human body or contacting vapour is prohibited. ★ Except for iron clothes, it can not be used for other purpose.

----------------------

The vapour of high pressure and

★ In case of idleness for long term, vapour generator should be kept after all water in it is cleaned and dried.

----------------------

Warning!

Use

★ During product use, as baseplate temperature is very

high, contact with any object

should be avoided, Attention should be paid during use.

----------------------

Caution

Sweepi ng and

keeping

To avoid scald.

high temperature may cause

To avoid scald.

Sediments may be caused in vapour generator kept with water.

Page 9

Precautions of Safe Use

※ The water can not be used: special water for iron, chemical water preventing calcium,

perfume or mixture of perfume.

Confirmation before Use

1. Confirm the 2. Use in this k used voltage of place

● Plain plateform

surface, level p

★ After use, the cleaning must b made after power plug is pulled out. ★ Washing powder or detergent can not be used for cleaning.

----------------------

shortened service life of produc

★ Product disassembly or prodcut transformation is prohibited.

----------------------

★ Clean water without foreign matters or mineral substance shall be used.

----------------------

Caution

Sweepi

ng and

keeping

Warning!

Others

Caution

Others

To avoid electric shock and

It may cause product damage and failure, electric shock.

It can prolong service life of product.

● Check if the service

voltage is same as

the product voltage without inclina

Page 10

Assembly and Use

1. Setting of hook 2. Put Water

Put water into w

bottle, also suct

pipe and hanst

put into bottle to

3. Power connection

4. Thermolator

adjusted to hig

temperature

● Adjust the the

to the position o

5. Normal use

♣ When you are using , if water bottle without water, motor temperture

become hot, product stop work.Give the water after one hour become work.Use this product( keep water in bottle).

● Install the hook

according to the

drawing,hang power

wire and vapour

tube on the hook.

● After confirmation

of the voltage insert

the plug, switch on

power switch and iron

switch. temperature.

● When the pointer

of pressure meter

use.

indicate 3.5 bar, LED

indicator will light up.

Then vapour switch

can be pressed for

Page 11

Cleaning method

★ Clean once a month. ★Open the salfly valve,give 1/2 water in

this bottle.Throug the valve drain the water(try 2-3 times) ★ After repeated operation, power on and heat for about 15 minutes, to eliminate moisture in pressure container completely.(Safety valve should be in open state right now)

★ Service life can be prolonged. ★When disassembling, the agent

should be contacted first to take any measures.

★ Vapour hole on press iron baseplate may be blocked by

foreign matters, which requires

cleaning by prod often.

------------------------

Thus service life of press iron can be

prolonged.

Page 12

Breakdown drawing

No. PARTS NAME No.

B CASE

C ELECTRICMAGNETIC PUMP

D PLATE K

E RELAY

G PCB BOARD

H1 HEATING PLATE(120V/220V) P

H2 SILICONE O - RING(A)

H3 HEATING PLATE COVER R LAMP (LED)

WATER BOTTLE H6

F TERMINAL BLOCK M

PRESSURE TANK ASSY(120V/220V)

PRESSURE METER NIPPLE

SOLENOID VALVE NIPPLE

PRESSURE SAFETY VALVE NIPPLE

SOLENOID VALVE(120V/220V)

PRESSURE CUTTING SWITCH

ELBOW NIPPLE [C TYPE]

TEFLON HOSE[C TYPE]

POWER CORD[120V/220V]

PRESSURE SAFETY VALVE

HANDLE

SILICONE IRON REST

POWER SWITCH

PRESSURE METER

PARTS NAME

Page 13

Troubleshooting

●The indicating light in

●The automatic thermoregulator

●Adjust the automatic thermoregu

●The temperature of base plate

●The base plate of iron is heating

●When heating up is impossible w

above measures, pls contact yo

●Turn the switch to ON, waiting f

●Wait for steam indicating light to

●Contact your agent for repair wh

no steam is produced after taki

●Too much water in bucket.

●Auto thermoregulator is at low

bucket,and pour it out when ther

●Adjust the automatic thermoregu

●Wait for heating completion of b

●Cut off power and connect the

●Refer to page 10 for inappropria

water. Tap water should be used

Common problems

Cause

Solution

front of product is OFF.

●The iron can't be

heated up. is set at lowest position. to necessary position.

●The iron runs normally, ●There is no water in bucket. ●Add water to bucket.

but steam amount is ●The steam boiler in front of little or no steam is product is closed. lighting up of indicating light. produced. ●The steam indicating light is

●Water jets out from

base plate of iron.

●The power is cut off. ●Check if the socket is well

●The socket is not well connected. connected. ●Check if there is any failure of

●Failure of socket. socket.

of iron is too low. pls wait for completion.

●The switch in front of product

is turned to OFF.

not ON. ON.

●The steam hole at base plate

of iron is blocked.

temperature position. is too much water