Conrad Electronic CTCM78 data sheet

Date printed 02.06.2015, Revision 20.03.2015
Version 01
Page 1 / 7
Conrad Electronic SE
Thermal Grease CTCM78
92240 Hirschau
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1
Product identifier
Thermal Grease CTCM78
1.2
Relevant identified uses of the substance or mixture and uses advised against
1.2.1
Relevant uses
See product information.
1.2.2
Uses advised against
None known.
1.3
Details of the supplier of the safety data sheet
Company
Conrad Electronic SE Klaus-Conrad-Str. 1 92240 Hirschau / GERMANY Phone 0180-5312111 Fax 0180-5312110 Homepage www.conrad.de
Manufacturer
KERAFOL Keramische Folien GmbH Koppe-Platz 1 92676 Eschenbach / GERMANY Phone +49 (0) 9645 88-300 Fax +49 (0) 9645 88-390 Homepage www.kerafol.com E-mail info@kerafol.com
Address enquiries to
Technical information
Safety Data Sheet
sdb@chemiebuero.de
1.4
Emergency telephone number
SECTION 2: Hazards identification
2.1
Classification of the substance or mixture
No classification.
2.2
Label elements
2.3
Other hazards
Environmental hazards
Does not contain any PBT or vPvB substances.
Other hazards
Further hazards were not determined with the current level of knowledge.
SECTION 3: Composition / Information on ingredients
Product-type:
The product is a mixture.
Range [%]
Substance
0,1 - <0,5
GHS/CLP: Repr. 1B: H360FD
Diboron trioxide
CAS: 1303-86-2, EINECS/ELINCS: 215-125-8, EU-INDEX: 005-008-00-8
Comment on component parts
SVHC (Candidate List of Substances of Very High Concern for authorisation) ≥0,1% CAS 1303-86-2 - Diboron trioxide For full text of H-statements and R-phrases: see SECTION 16.
www.chemiebuero.de, Phone +49 (0)941-646 353-0, info@chemiebuero.de, 140812a
kaf00083 GB
Date printed 02.06.2015, Revision 20.03.2015
Version 01
Page 2 / 7
Conrad Electronic SE
Thermal Grease CTCM78
92240 Hirschau
SECTION 4: First aid measures
4.1
Description of first aid measures
General information
Take off contaminated clothing and wash before reuse.
Inhalation
Ensure supply of fresh air.
Skin contact
When in contact with the skin, clean with soap and water. Consult a doctor if skin irritation persists.
Eye contact
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Ingestion
In the event of symptoms seek for medical treatment.
4.2
Most important symptoms and effects, both acute and delayed
None known.
4.3
Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1
Extinguishing media
Suitable extinguishing media
foam, dry powder, water spray jet, carbon dioxide
Extinguishing media that must not be used
Full water jet
5.2
Special hazards arising from the substance or mixture
Risk of formation of toxic pyrolysis products.
5.3
Advice for firefighters
Use self-contained breathing apparatus.
Fire residues and contaminated firefighting water must be disposed of in accordance within the local regulations.
SECTION 6: Accidental release measures
6.1
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Ensure adequate ventilation. High risk of slipping due to leakage/spillage of product.
6.2
Environmental precautions
Do not discharge into the drains/surface waters/groundwater.
6.3
Methods and material for containment and cleaning up
Take up mechanically. Take up residues with absorbent material (e.g. sand, sawdust, general-purpose binder). Dispose of absorbed material in accordance within the regulations.
6.4
Reference to other sections
See SECTION 8+13
www.chemiebuero.de, Phone +49 (0)941-646 353-0, info@chemiebuero.de, 140812a
kaf00083 GB
Date printed 02.06.2015, Revision 20.03.2015
Version 01
Page 3 / 7
Conrad Electronic SE
Thermal Grease CTCM78
92240 Hirschau
SECTION 7: Handling and storage
7.1
Precautions for safe handling
The normal safety precautions for handling chemicals must be observed.
Do not eat, drink, smoke or take drugs at work. Wash hands before breaks and after work. Use barrier skin cream.
7.2
Conditions for safe storage, including any incompatibilities
Keep only in original container.
Do not store together with food and animal food/diet.
Keep container tightly closed. Store in a dry place.
7.3
Specific end use(s)
See product use, SECTION 1.2
SECTION 8: Exposure controls / personal protection
8.1
Control parameters
Ingredients with occupational exposure limits to be monitored (GB)
Range [%]
Substance
40 - 60
Aluminium oxide
CAS: 1344-28-1, EINECS/ELINCS: 215-691-6, Reg-No.: 01-2119529248-35-XXXX
Long-term exposure: 10 mg/m³, inhalable dust (respirable dust: 4 mg/m³)
1 - <5
Graphite
CAS: 7782-42-5, EINECS/ELINCS: 231-955-3, Reg-No.: 01-2119486977-12-XXXX
Long-term exposure: 10 mg/m³, (inhalable dust)
0,1 - <0,5
Diboron trioxide
CAS: 1303-86-2, EINECS/ELINCS: 215-125-8, EU-INDEX: 005-008-00-8
Long-term exposure: 10 mg/m³
Short-term exposure (15-minute): 20 mg/m³
8.2
Exposure controls
Additional advice on system design
Ensure adequate ventilation on workstation.
Eye protection
safety glasses
Hand protection
butyl rubber, > 120 min (EN 374) The details concerned are recommendations. Please contact the glove supplier for further information.
Skin protection
Protective clothing.
Other
Avoid contact with eyes and skin. Personal protective equipment should be selected specifically for the working place, depending on concentration and quantity handled. The resistance of these equipments to chemicals should be ascertained with the respective supplier.
Respiratory protection
Not required under normal conditions.
Thermal hazards
none
Delimitation and monitoring of the environmental exposition
Comply with applicable environmental regulations limiting discharge to air, water and soil.
www.chemiebuero.de, Phone +49 (0)941-646 353-0, info@chemiebuero.de, 140812a
kaf00083 GB
Date printed 02.06.2015, Revision 20.03.2015
Version 01
Page 4 / 7
Conrad Electronic SE
Thermal Grease CTCM78
92240 Hirschau
SECTION 9: Physical and chemical properties
9.1
Information on basic physical and chemical properties
Form
pasty
Color
grey black
Odor
characteristic
Odour threshold
not applicable
pH-value
not applicable
pH-value [1%]
not applicable
Boiling point [°C]
not applicable
Flash point [°C]
not applicable
Flammability (solid, gas) [°C]
not determined
Lower explosion limit
not applicable
Upper explosion limit
not applicable
Oxidizing properties
no
Vapour pressure/gas pressure [kPa]
not determined
Density [g/ml]
not determined
Bulk density [kg/m³]
not applicable
Solubility in water
virtually insoluble
Partition coefficient [n-octanol/water]
not determined
Viscosity
not applicable
Relative vapour density determined in air
not applicable
Evaporation speed
not applicable
Melting point [°C]
not determined
Autoignition temperature [°C]
not determined
Decomposition temperature [°C]
> 350
9.2
Other information
none
SECTION 10: Stability and reactivity
10.1
Reactivity
No dangerous reactions known if used as directed.
10.2
Chemical stability
The product is stable under standard conditions.
10.3
Possibility of hazardous reactions
Avoid temperatures above 150°C.
10.4
Conditions to avoid
Excessive heating
10.5
Incompatible materials
not applicable
www.chemiebuero.de, Phone +49 (0)941-646 353-0, info@chemiebuero.de, 140812a
kaf00083 GB
Date printed 02.06.2015, Revision 20.03.2015
Version 01
Page 5 / 7
Conrad Electronic SE
Thermal Grease CTCM78
92240 Hirschau
10.6
Hazardous decomposition products
In the case of heating (150-180°C) following modest (decomposition) products may occure: Benzene Formaldehyde.
SECTION 11: Toxicological information
11.1
Information on toxicological effects
Acute toxicity
Serious eye damage/irritation
not determined
Skin corrosion/irritation
not determined
Respiratory or skin sensitisation
not determined
Specific target organ toxicity — single exposure
not determined
Specific target organ toxicity — repeated exposure
not determined
Mutagenicity
not determined
Reproduction toxicity
not determined
Carcinogenicity
not determined
General remarks
Toxicological data of complete product are not available. No classification on the basis of the calculation procedure of the preparation directive.
SECTION 12: Ecological information
12.1
Toxicity
Range [%]
Substance
0,1 - <0,5
Diboron trioxide, CAS: 1303-86-2
EC50, (48h), Daphnia magna: 370-490 mg/l (IUCLID).
12.2
Persistence and degradability
Behaviour in environment compartments
not determined
Behaviour in sewage plant
not determined
Biological degradability
not determined
12.3
Bioaccumulative potential
Accumulation in organisms is not expected.
12.4
Mobility in soil
No information available.
12.5
Results of PBT and vPvB assessment
Based on all available information not to be classified as PBT or vPvB respectively.
12.6
Other adverse effects
No classification on the basis of the calculation procedure of the preparation directive.
www.chemiebuero.de, Phone +49 (0)941-646 353-0, info@chemiebuero.de, 140812a
kaf00083 GB
Date printed 02.06.2015, Revision 20.03.2015
Version 01
Page 6 / 7
Conrad Electronic SE
Thermal Grease CTCM78
92240 Hirschau
SECTION 13: Disposal considerations
13.1
Waste treatment methods
Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. It is not possible to determine a waste code for this product in accordance with the European Waste Catalogue (EWC) since it is only possible to classify it according to how it is used by the customer. The waste code is to be determined within the EU in liaison with the waste-disposal operator.
Product
In according to RoHS! Disposal in an incineration plant in accordance with the regulations of the local authorities.
Waste no. (recommended)
070217
Contaminated packaging
Uncontaminated packaging may be taken for recycling.
Waste no. (recommended)
150102
SECTION 14: Transport information
14.1
UN number
See SECTION 14.2 in accordance with UN shipping name
14.2
UN proper shipping name
Transport by land according to ADR/RID
NO DANGEROUS GOODS
Inland navigation (ADN)
NO DANGEROUS GOODS
Marine transport in accordance with IMDG
NOT CLASSIFIED AS "DANGEROUS GOODS"
Air transport in accordance with IATA
NOT CLASSIFIED AS "DANGEROUS GOODS"
14.3
Transport hazard class(es)
See SECTION 14.2 in accordance with UN shipping name
14.4
Packing group
See SECTION 14.2 in accordance with UN shipping name
14.5
Environmental hazards
See SECTION 14.2 in accordance with UN shipping name
14.6
Special precautions for user
Relevant information under SECTION 6 to 8.
14.7
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
not applicable
www.chemiebuero.de, Phone +49 (0)941-646 353-0, info@chemiebuero.de, 140812a
kaf00083 GB
Date printed 02.06.2015, Revision 20.03.2015
Version 01
Page 7 / 7
Conrad Electronic SE
Thermal Grease CTCM78
92240 Hirschau
SECTION 15: Regulatory information
15.1
Safety, health and environmental regulations/legislation specific for the substance or mixture
EEC-REGULATIONS
1967/548 (1999/45); 1991/689 (2001/118); 1999/13; 2004/42; 648/2004; 1907/2006 (Reach); 1272/2008; 75/324/EEC (2008/47/EC); 453/2010/EC
TRANSPORT-REGULATIONS
DOT-Classification, ADR (2015); IMDG-Code (2015, 37. Amdt.); IATA-DGR (2015).
NATIONAL REGULATIONS (GB):
EH40/2005 Workplace exposure limits (Second edition, published December 2011). CHIP 3/ CHIP 4
- Observe employment restrictions for people
no
- VOC (1999/13/CE)
0%
15.2
Chemical safety assessment
not applicable
SECTION 16: Other information
16.1
Hazard statements (SECTION 3)
H360FD May damage fertility. May damage the unborn child.
16.2
Abbreviations and acronyms:
ADR = Accord européen relatif au transport international des marchandises Dangereuses par Route RID = Règlement concernant le transport international ferroviaire de marchandises dangereuses ADN = Accord européen relatif au transport international des marchandises dangereuses par voie de navigation intérieure CAS = Chemical Abstracts Service CLP = Classification, Labelling and Packaging DMEL = Derived Minimum Effect Level DNEL = Derived No Effect Level EC50 = Median effective concentration ECB = European Chemicals Bureau EEC = European Economic Community EINECS = European Inventory of Existing Commercial Chemical Substances ELINCS = European List of Notified Chemical Substances GHS = Globally Harmonized System of Classification and Labelling of Chemicals IATA = International Air Transport Association IBC-Code = International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk IC50 = Inhibition concentration, 50% IMDG = International Maritime Code for Dangerous Goods IUCLID = International Uniform ChemicaL Information Database LC50 = Lethal concentration, 50% LD50 = Median lethal dose MARPOL = International Convention for the Prevention of Marine Pollution from Ships PBT = Persistent, Bioaccumulative and Toxic substance PNEC = Predicted No-Effect Concentration REACH = Registration, Evaluation, Authorisation and Restriction of Chemicals TLV®/TWA = Threshold limit value – time-weighted average TLV®STEL = Threshold limit value – short-time exposure limit VOC = Volatile Organic Compounds vPvB = very Persistent and very Bioaccumulative
16.3
Other information
Classification procedure
Modified position
none
Copyright: Chemiebüro®
www.chemiebuero.de, Phone +49 (0)941-646 353-0, info@chemiebuero.de, 140812a
kaf00083 GB
Loading...