Conrad
Powerline Adapter PL200D
While the information in this manual has been compiled with great care, it may not be deemed an assurance of product
characteristics. The manufacturer shall be liable only to the degree specified in the terms of sale and delivery.
The reproduction and distribution of the documentation and software supplied wit h this product and the use of its contents
is subject to written authorization from the manufacturer. We reserve the right to make any alterations that arise as the
result of technical development.
Trademarks
Windows
HomePlug
®
and Microsoft® are registered trademarks of Microsoft, Corp.
®
is a registered trademark of Home Plug Power Alliance.
Subject to change without notice. No liability for technical errors or omissions.
May 2009
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 What does HomePlug stand for?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.1.1 Powerline Adapter PL200D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.2 Practical examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
1.2.1 Internet solution for single users with Internet connection via a modem
(network port) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
1.2.2 Internet solution for multi-users with Internet connection via a modem
router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.2 System requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.3 Connection and display elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.4 Connecting the adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3 Configuring the HomePlug network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1 Encrypting the HomePlug network at the touch of a button. . . . . . . . . . . . . . . . . . . . 8
3.2 Encrypting the HomePlug network via the configuration software. . . . . . . . . . . . . . .9
4 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.2 Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
4.3 Warranty conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Conrad Powerline Adapter PL200D
4 Introduction
1 Introduction
This chapter gives an overview of the HomePlug technology and briefly introduces the adapter. Practical examples are listed at the end of the chapter.
1.1 What does HomePlug stand for?
HomePlug (“Inhouse Powerline”) is an intelligent, secure technology that lets
you set up a home network easily, quickly and economically via your electri
cal wiring, without the need for complex and expensive dedicated cabling.
The available performance and effort required for the installation also com
pares favourably to traditional methods—HomePlug technology now attains
speeds you would expect from other LAN technologies.
1.1.1 Powerline Adapter PL200D
-
-
The adapter provides a transmission rate of up to 200 Mbps via the electrical
wiring in the building. It also facilitates larger data transfer between the com
puters in your network via the electrical wiring.
Simple Installation
• Connect the adapter via the network cable to the computer or the respective
network device.
• Connect the adapter to the electrical wiring
• As an option: for individual password allocation simply press the encryption
button or install the configuration software on your computer
• That's it!
-
Conrad Powerline Adapter PL200D
Introduction 5
1.2 Practical examples
1.2.1 Internet solution for single users with Internet connection
via a modem (network port)
modem
1.2.2 Internet solution for multi-users with Internet connection
via a modem router
modem router
Conrad Powerline Adapter PL200D
6 Installation
2Installation
This chapter describes the connection and display elements of the adapter
and how to connect it.
2.1 Package contents
• Powerline Adapter PL200D
• Network cable
• Printed installation leaflet
• CD containing online documentation and configuration software
The manufacturer reserves the right to change the package contents without
prior notice.
2.2 System requirements
• Operating systems: Windows XP (32 bit), Windows Vista or any other
operating system with network support
• Network connection
Please note that your computer or other device must feature a network
adapter with an Ethernet port.
2.3 Connection and display elements
The adapter is fitted with 3 control lamps (LEDs) as well as a network connection and an encryption button.
LEDs Powerline Adapter PL200D
Power
HomePlug
green Lit steady when the Powerline Adapter PL200D is ready for
operation; flashes when the Powerline Adapter PL200D is in
standby mode.
green The network connection is suitable for HD video streaming;
flashes when data is being transmitted.
Conrad Powerline Adapter PL200D
LEDs Powerline Adapter PL200D
orange The network connection is suitable for SD video streaming and
online gaming; flashes when data is being transmitt ed.
red The network connection is suitable f or simple data transfer and
Internet access; flashes when data is being transmitt ed.
Installation 7
Ethernet
A 100 Mbps or 10 Mbps connection to the Ethernet network
exists; flashes when data is being transmitted.
• Ethernet connection
This is the connection point on the addapter for connecting it to a computer
or another network device with the network cable (included).
• Encryption button
Data encryption at the touch of a button; For more information on the functions of the encryption button, please see the chapter 'Configuring the
HomePlug network'.
Please note that all adapters which are connected to the electrical wiring,
switch to energy-saving mode after approx. 20 minutes, if no active network
device is connected to the Ethernet port. In energy-saving mode, the adapter
cannot be accessed via the electrical wiring.
2.4 Connecting the adapter
Use the included network cable to connect the adapter to the network
port of your running computer.
Plug the adapter into a free electrical outlet.
In order to connect multiple HomePlug devices into a self-contained, secure
network, now continue with the installation of the configuration. For more
information, refer to the chapter '
Configuring the HomePlug network'.
Conrad Powerline Adapter PL200D
8 Configuring the HomePlug network
3 Configuring the HomePlug network
To set up custom encryption for your network—either using the encryption
button or the configuration software.
3.1 Encrypting the HomePlug network at the touch of
a button
To encrypt a Homeplug network simply press the encryption button that is
located on the device. Pressing this button will encrypt your network with a
randomly generated password.
Adapters cannot be configured while in Standby mode.
The following section contains exact instructions on the basis of possible network scenarios:
Encrypting a new Powerline Adapter PL200D network consisting of
two adapters
If the adapters are still in their factory default states, press the encryption buttons on both adapters for at least ten seconds, until the Power LED goes
out and starts to flash.
Once both adapters have been successfully connected, press each encryption button for < 1 second within two minutes of one another. That's it!
Your HomePlug network is now protected against unauthorized access.
Conrad Powerline Adapter PL200D
Expanding an existing Powerline Adapter PL200D network with a new
Powerline Adapter PL200D
If you have already secured your existing Powerline Adapter PL200D network using the encryption button, use the same method to integrate other
adapters. Once you have successfully connected the new Powerline Adapter
PL200D, first press the encryption button of one of your network’s existing
adapters (< 1 second), then press the encryption button of your new Power
line Adapter PL200D (< 1 second) within two minutes. That's it! The new
Powerline Adapter PL200D is now integrated in your network.
To integrate additional adapters in your network, repeat the above steps.
Excluding a Powerline Adapter PL200D from your network
To exclude a Powerline Adapter PL200D from an existing network, press its
encryption button for at least ten seconds. The device will be assigned a
new randomly generated password and will thus no longer be able to access
the network. To integrate the adapter in a different Powerline Adapter
PL200D network, follow the steps described above, depending on whether
you are setting up a new network or adding the adapter to an existing one.
Configuring the HomePlug network 9
-
3.2 Encrypting the HomePlug network via the configuration software
To install the configuration software, insert the included CD-ROM in the CD
drive of your computer. If autoplay is installed on your computer, the installa
tion will start automatically. Otherwise, open the folder with the Windows
Explorer by right-clicking on Start and selecting Explorer from the context
menu. Double-click to start the installation wizard manually.
Upon successful installation, the configuration software can be found under
Start --> All programs --> HomePlug --> HomePlug Configuration Wiz
ard.
• Scan for local adapter
After launching the wizard, it initially scans for the local adapter connected
directly to your computer.
Please note: You must connect every HomePlug device that you intend to
integrate securely in your network directly to your computer for configuration.
-
-
Conrad Powerline Adapter PL200D
10 Configuring the HomePlug network
• Assign a network password
In this step, select a network password that will apply to all adapters in your
home network. The password must be used by all devices.
The factory default password is "HomePlug". For security reasons, we re-
commend overwriting it and assigning a password of your own.
• Add further adapters
Connect each adapter, which is to be added to your network, to your computer and assign it a password.
Conrad Powerline Adapter PL200D
4 Appendix
4.1 Technical data
Standards Ethernet specification IEEE 802.3, IEEE 802.3x, IEEE
Protocols CSMA/CD
Transfer rate up to 200 Mbps
Transfer procedure Asynchronous
Modulation OFDM—84 carrier
Appendix 11
Powerline Adapter PL200D
802.3u
Auto MDI/X
HomePlug AV
Range up to 200 m via power supply
Security 128-bit AES encryption via power supply
LEDs Power
HomePlug
Ethernet
HomePlug connection Standard power plug
Computer interface RJ45
Power consumption 5 VA (max.)
3.3 VA (stand-by)
Power supply Integrated power supply via power socket
Rated voltage: 110 - 230 VAC
Rated current: 0.05 A
Rated frequency: 50 Hz
Environment Humidity (non-condensing): 10-90%
Storage: -25°C – 70°C
Operation: 0°C – 40°C
System requirements Ethernet interface
Windows XP (32 bit), Windows Vista or any other opera-
ting system with network support
Warranty 2 years
Conrad Powerline Adapter PL200D
12 Appendix
4.2 Important safety instructions
All safety and operating instructions should be read and understood before
using the device, and should be kept for future reference.
• Never open the device. There are no user-serviceable parts inside the
device.
Do not try to service this product yourself! Contact qualified technicians each
and every time your device needs maintenance. There is a risk of electric
shock!
• Use the device in a dry location only.
• Always use the included network cable to connect the device.
• Do not insert any objects into the openings of the device.
• To disconnect the device from the power supply grid, pull the power plug.
• Do not keep the device in direct sunlight.
• Slots and openings on the case serve as ventilation. Never block or cover
them.
• Never set up the device near a heater or radiator.
• The device should be located only where sufficient ventilation can be ensu -
red.
• Disconnect the device from the power supply grid before cleaning. Use a
moist towel to clean the device. Never use water, paint thinner, benzene,
alcohol or other strong cleaning agents when cleaning the device, as these
could damage the case.
• Never use the device with a power supply that does not meet the specifications provided on the rating plate. If you do not know what type of power
supply you have at home, contact your dealer or energy supplier.
• In the event of damage, disconnect the device from the power supply grid
and contact customer service. This applies, for example, if
• the power cable or plug is damaged.
• liquid has been spilled on the device or objects have fallen into the
device.
• the device has been exposed to rain or water.
• the device does not work, even though the operating instructions
• the device’s case is damaged.
Conrad Powerline Adapter PL200D
have been followed properly.
4.3 Warranty conditions
The warranty is given to purchasers of the manufacturer's products in addition to the warranty
conditions provided by law and in accordance with the following conditions:
1 Warranty coverage
a) The warranty covers the equipment delivered and all its parts. Parts will, at the manufac tu -
rer's sole discretion, be replaced or repaired free of charge if, despite proven proper handling and adherence to the operating instructions, these parts became defective due to
fabrication and/or material defects. Alternatively, the manufacturer reserves the right to
replace the defective product with a comparable product with the same specifications and
features. Operating manuals and possibly supplied software are excluded from the warranty.
b) Material and service charges shall be covered by the manufacturer, but not shipping and
handling costs involved in transport from the buyer to the service station and/or to the
manufacturer.
c) Replaced parts become property of the manufacturer.
d) The manufacturer is authorized to carry out technical change s (e.g. firmware updates ) bey-
ond repair and replacement of defective parts in order to bring th e equipment up to the cur-
rent technical state. This does not result in any additional charge for the customer. A legal
claim to this service does not exist.
Appendix 13
2 Warranty period
The warranty period for this product is two years. This period begins at the day of delivery from
the manufacturer's dealer. Warra nty serv ices carried out by the man ufact urer do no t result in an
extension of the warranty period nor do they initiate a n ew warranty period. The warra nty period
for installed replacement parts ends with the warranty period of the device as a whole.
3 Warranty procedure
a) If defects appear during the warranty period, the warranty claims must be made immedia-
tely, at the latest within a period of 7 days.
b) In the case of any externally visible damage arising from transport (e.g . damage to the hou-
sing), the person carrying out the transportation and t he sender should be informed imme-
diately. On discovery of damage which is not externally visible, the transport company and
the sender are to be immediately informed in writing, at th e latest within 3 da ys of delive ry.
c) Transport to and from the location where the warranty claim is accepted and/or the repaired
device is exchanged, is at the purchaser's own risk and cost.
d) Warranty claims are only valid if a copy of the original p urc hase receipt is re turned with the
device. The manufacturer reserves the right to require the submission of the original
purchase receipt.
4 Suspension of the warranty
All warranty claims will be deemed invalid
a) if the label with the serial number has been removed from the device,
b) if the device is damaged or destroyed as a result of acts o f nature or b y environmental influ-
ences (moisture, electric shock, dust, etc.),
c) if the device was stored or operated under conditions not in compliance with the technical
specifications,
d) if the damage occurred due to incorrect handling, especially to non-observance of the sys-
tem description and the operating instructions,
Conrad Powerline Adapter PL200D
14 Appendix
e) if the device was opened, repaired or modified by persons not contracted by the manufac-
turer,
f) if the device shows any kind of mechanical damage, or
g) if the warranty claim has not been reported in accordance with 3a) or 3b).
5 Operating mistakes
If it becomes apparent that the reported malfunction of the device ha s been caused by unsuitable
hardware, software, installation or operation, the manufacturer reserves the right to charge the
purchaser for the resulting testing costs.
6 Additional regulations
a) The above conditions define the complete scope of the manufacturer's legal liability.
b) The warranty gives no entitlement to additional claims, such as any refund in full or in part.
Compensation claims, regardless of the legal basis, are excluded. This does not apply if
e.g. injury to persons or damage to private property are spec ifically c overed by t he product
liability law, or in cases of intentional act or culpable negligence.
c) Claims for compensation of lost profits, indirect or consequential detriments, are excluded.
d) The manufacturer is not liable for lost data or retrieval of lost data in cases of slight and ord i-
nary negligence.
e) In the case that the intentional or culpable negligenc e of the manufacturer's employees has
caused a loss of data, the manufacturer will be liable for those costs typical to the recovery
of data where periodic security data back-ups have been made.
f) The warranty is valid only for the first purchaser and is not transferable.
g) The court of jurisdiction is located in Aachen, Germany in the case that the purchaser is a
merchant. If the purchaser does not have a court of jurisdiction in the Federal Republic of
Germany or if he moves his domicile out of Germany after conclusion of the contract, the
manufacturer's court of jurisdiction applies. This is also applicable if the purchaser's domi-
cile is not known at the time of institution of proceedings.
h) The law of the Federal Republic of Germany is applicable. The UN commercial law does
not apply to dealings between the manufacturer and the purchaser.
Conrad Powerline Adapter PL200D
Loading...