Conrad LP-PC Instruction Manual

1

LP-PC

3 SPEED BELT DRIVE TURNTABLE WITH LIFT LEVER,

POWER BY USB PORT, PC LINK FUNCTION

INSTRUCTION MANUAL

READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE

2

PRODUCT FEATURES

- 33/45/78 RPM SELECTABLE TURNTABLE

- AUTOMATIC / MANUAL STOP TURNTABLE

- BELT DRIVEN SYSTEM

- 45RPM ADAPTOR INCLUDED

- LIFT LEVER CONTROL

- RCA LINE-OUT

- AUTO AND MANUAL STOP TURNTABLE

- POWERED BY USB PORT

- USB CABLE & AUDACITY CD SOFTWARE INCLUDED

- PC LINK FUNCTION TO RECORD TURNTABLE TO COMPUTER

LOCATION OF CONTROL

1) 45RPM ADAPTOR

2) LIFT LEVER (FOR RECORD PLAY / PUASE)

3) AUTO STOP ON/OFF SWITCH

4) 33/45/78 RPM SPEED SELECTOR

5) TONE ARM

6) USB PORT

7) RCA LINE OUT SOCKET

3

CAUTION:

USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.

PRECAUTIONS FOR USE

INSTALLATION

• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.

• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS

AROUND THE UNIT FOR VENTILATION.

CONNECTION

CONNECT THE USB CABLE WITH THE USB PORT (6) OF THE UNIT AND COMPUTER, THEN THE UNIT WILL BE
POWERED BY THE USB PORT.

PHONO & ENCODING

NOTED:

- REMOVE THE STYLUS PROTECTOR.

- BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE

ARM REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.

1. PLACE THE RECORD ON THE PLATTER (USE THE 45 RPM ADAPTOR IF
REQUIRED).

2. PUSH THE LIFT LEVER (2) UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK,
AND THEN SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL START TO
ROTATE.

3. PUT DOWN THE LIFT LEVER (2) TO DROP THE TONE ARM AND TOUCH THE RECORD
GENTLY. PHONO PLAYING STARTS NOW.

4. PUSH THE LIFT LEVER (2) UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, NOW PLATTER
WILL STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE PLAYING, USER NEEDS
TO PUT DOWN THE LIFT LEVER (2).

5. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. PUSH THE LIFT LEVER
(2) UPWARD TO RAISE THE TONE ARM AND MOVE IT TO THE ARM PARK, AND THEN PUT DOWN THE
LIFT LEVER (2).

6. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE ARM PARK.

REMARK : AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST TRACK FINISHES. IN THIS CASE, SELECT THE AUTO-STOP SWITCH (3) TO “ OFF
“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY UNPLUGGINT USB CABLE OR EXTERNAL POWER TRANSFORMER OR SWITCH BACK THE
AUTO-STOP SWITCH (3) TO “ ON “ POSITION TO STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE
ARM TO THE ARM PARK.

LINE OUT SOCKET

- THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. AMPLIFIER AND

SPEAKER) BYRCA LINE OUT SOCKET (7) AT REAR CABINET FOR MUSIC PLAYBACK

Digitalising__________________________________________________________________

1. THE SYSTEM CAN CONVERT AUDIO SOURCE FROM TURNTABLE TO COMPUER BY CONNECTING THE
USB PORT AT BACK PANEL WITH COMPUTER.

2. CONNECT THE PRODUCT TO A COMPUTER VIA USB CABLE

3. INSERT THE SOFTWARE CD AND FOLLOW THE ON-SCREEN INSTRUCTION. THE CD INCLUDED
AUDACITY 2.0, WHICH CAN BE SUPPORTED BY WINDOW 2000/XP/VISTA 7 (WINDOW VERSION) AND
MAC OS X 10.4 OR LATER (MAC VERSION).

4. YOU CAN FIND FURTHER INFORMATION ON THE SOFTWARE IN THE HELP MENU AND IN THE
OPERATING INSTRUCTION OF THE SOFTWARE. THERE ARE AVAIALBE AT THE FOLLOWING LINK:
http://audacity.sourceforge.net/help/documentation