z Video monitoring on Android Phone
To use the Android Market, Android phone must be connected to the Internet.
Mysec24 Lite is free; you can download it without charge.
Once you download it, it’s immediately installed on your Android phone.Then follow the steps below:!
From Android “Market” your Android Phone “Add” to add IP Camera
User’s Manual
Model No.: IP-562M
Motion-JPEG IP Camera with Plug n Play
Network Remote Viewing Function
Key in ID & PWs
Of the IP CAM
23
For instant Viewing
Live video from IP CAM
are now show in screen
Press snapshot will save
Photo to phone memory
PLEASE READ CAREFULLY AND SAVE
This manual contains important information about this product's operation.
If you are installing this product for others, you must leave this manual -or a
copy- with the end user.
23
What You Get
FCC/ CE
Knowing the Camera
Camera Installation
Product Specification
Software Installation
(1) IP Camera
(2) Power adaptor
(3) Camera stand
(4) Network cable
(5) Screws
(6) Software CD
(7) Manual
Contents
What You Get
Model: IP-562M
1
2
3
3
6
7
3. IP Cam Mobile
Please download the dedicated video monitoring so ware for Apple OS4 and Android opera
system.
For iPhone, make a so
so
ware to the phone accordingly.
For smart phone with Android system, make a so
“ MySec24 Lite ”, then install the so
Please refer to the example for iPhone Android phone below and refer to the user’s manual of
your phone for
z Video monitoring on iPhone
To use the App Store, iPhone must be connected to the Internet.
MySec24 Lite is free; you can download it without charge.
Once you download it, it’s immediately
!
!
!
!
!
!
!
!
!
!
!
!
!
Launch
!
!
App Store
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Launch Select se ng
!
to set u IP am info
for rst
!
pC
!
!
!
!
!
ware search from APP store and look for “ MySec24 Lite ” then install the
ware search from Android Market and look for
ware to the phone accordingly.
more opera
details.
installed on your iPhone. Then follow the steps below:!
Search for
"MySec24 Lite"
Your device ID/Password
(Ex. AAAA0001/12345678)
User ID/Password (Set on
Search Tool)
Select a Camera
P2P IPCam
Lanch
"MySec24 Lite"
1
22
n Please click "search", then select an "IP cam" on the list.!
!
!
Set IP address for PC
and Camera
!
!
o Make sure the IPs of LAN and IPCAM are the same, except the last block!
!
!
!
Changing IP Address in Windows
Click Startbu onRight click My Network Places iconclick Proper esRight click Local Area
iconClick Proper esclick Internet Protocol[TCP/IP] iconclick Proper es
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
IP address in
Please read before installing and using this product
be null and void in such cases.
3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.
or cause camera temporary malfunction.
7. Remove the power adapter during long periods between usages.
FCC/CE WARNING
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules
installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interferenc
to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Move the equipment away from the receiver.
-Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/television technician for additional suggestions.
c
Disposal
regulations. Disposal of spent batteries / accumulators:
lla diov A .2
esU .8
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules.
Operation is subjected to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
oc-non yb desuac segamaD
htiw secived eht esU .5
diova , ytefas nwo ruoy roF .6
ger eht teem o T .9
od ,selbac rewop kcehC .01
dispose of these batteries/ accumulators in the household waste.
snoituace rP ytefaS tnatropmI
rof ytilibail yna emussa ton lliw e W !yt narraw eht diov lliw launam gnitarepo siht htiw ecnailpm
ah reporpmi yb desuac snosrep ro smeti ot segamad
ro aremac eht elbmessasid ro erutcnup ,pord ton oD .1
.gnisu erofeb sdnah yrd dna , retaw htiw tcatnoc
reviecer ro aremac eht esopxe ton oD .4
. ydob reviecer ro aremac eht no drah gnisserp diov A .erac
. rerutcafunam eht yb deilppus sretpada rewop dna seirossecca eht ylno
Products with CE Marking comply with EMC
Directive (2004/108/EC)
Issued by the
Commission of the European Community. Compliance
with these directives implies conformity to the following
European Norms:
EMC: EN55024
LVD:EN60950
tacifidom ro egnahc yna taht denoituac era uo Y
.tnempiuqe hcus etarepo ot ytirohtua ruo Y diov dluo
umucca/seirettab
am era secnatsbus suodrazah
evitcepser eht rof snoitaiverbba ehT
on nac taht srotalumucca dna seirettab tneps
tnoc dna stnemeriuqer lagel eht llifluf ot
srotalumucca ro seirettab reverehw ro steltuo , ytinummoc
.dediov eb lliw ytnarr aw eht esiwrehto ;reviecer
.gninthgil ro mrots a si ereht nehw aremac eht f fo rewop ro aremac eht gnisu
.stnafni fo hcaer eht fo tuo secived eht peek , ytilibisnopser latnerap ot gniniatrep snoitalu
.noitarepo ni era secived e ht revenehw segde prahs yb degamad ro dehsurc teg ton
laitnediser ni ecnerefretni lufmrah tsniaga noitcetorp elbanosaer edivorp ot dengised era stimil esehT
!tnemn orivne ruo fo noitcetorp eht ot etubir
lliw mialc ytnarraw ynA !seciton ytefas eh t htiw ecnailpmoc-non ro gnildn
aremac eht egamad yam os gnioD .thgilnus t cerid ni ti evael ro erutarepmet hgih ot
yrotutats dilav eht ot gnidrocca fo desopsid e b tsum ti ,deriaper eb regnol on nac ro snoitcnuf regnol on metsys aremac eht fI
niatnoc taht srotalumu cca/seirettaB !detibihorp si etsaw dlohesuoh nommoc htiw srotal
ruoy ni stniop noitcelloc detangised eht ot deg rahc eb regnol
ecn ailpmoc rof elbisnopser ytrap eht yb devorppa ylsserpxe ton tnempiuqe eht ot snoi
tneps fo gnisopsiD .srotalumu cca dna seirettab tneps lla nruter ot )ecnanidrO yrettaB( wal yb deriuqer era uo Y
ot detibihorp si ti taht etacidni slobmys esehT .edis eht no slobmys eht htiw dekr
nruter nac uo Y .dael =bP , yrucrem =gH ,muimdac =dC :era slatem yvaeh
uoy wolla lliw snoitcurtsni eseht gniwolloF .dlos era
21
2
Knowing the Camera
IP Camera
6.
1.
Camera Lens
2. IR LED
3. EDS
4. T-boIt
5. Camera stand
6. Weather-proof body
4.
7.
8.
5.
7. RJ45 Port
8. DC IN
9.Data Transmission LED (RED)
10.Link LED(Green)
9.
2.
1.
10.
3.
Camera Installation:
Select a suitable installation and monitoring site. A suitable installation site has the following features:
- Dry - As Dust-Free as Possible - Solid Surface wiithout Vibration
- Good Air Circulation - Electrical Outlet in Close Vicinity
Camera should not directly face the sun or other bright light.
Prior to mounting the camera, it is recommended that you
test the operation and location of the camera.
Fastening the wall bracket
- Select the desired mounting place (near power
outlet if possible)
- Use supplied screws to attach wall bracket to
wall or suitable platform. Use dowels if necessary.
- Align the camera and screw the T - bolt tight.
B. Basic S ngs
!
Environment: Night/ Indoor/ Outdoor*
Frequency: 50 Hz or 60Hz based on your AC power’s frequency.
USA and countries in South America: 60Hz
Taiwan: 60Hz
Japan: 50Hz / 60Hz both
Mo
st of countries in European / Middle East / Africa: 50Hz
!
C. Authen ca on
!
!
Set up your personal account and password. Once been set, It can only be changed or deleted under
local network.
!
No User Authority is for the security use, we strongly suggest you to
set up your own ID and password once you begin to use the product.
2. 2 Connect IP Cam and computer
Use Search Tool to start the co
!
!
!
!
!
!
!
!
!
!
!
!
Disable Auto
DHCP S
ng
3
20
2. Search Tool
2. 1 How to use Search Tool
Click "IPCAM Set up"
Search Tool helps se
Note! This so
!
!
!
!
!
!
!
!
!
!
A. Device List
!
!
!
!!
Note: In this preview window, all the changes are directly saved to your device.
ݷ Brightness
Select brightness by clicking on "Low", "Standard", or "High".
ݷ Quality
"+ ": for clear picture and bigger le size
"ɡ": for less picture quality and smaller le size
ݷ Environment
Please select the "Indoor" or "Outdoor" or "Night" mode, depending
on the environment co
ݷ Posi on: Normal/Flip/Mirror
ng up your IP cam directly.
ware can be operated under the local network only
Authen ca
of Device
Info of camera found
Search for cameras under
local network
on.
Basic Se ngs
Legal & Security Warnings
Be sure to comply with the country or local laws in regards to publishing
recorded images / videos or surreptitious viewing and videos monitoring. Users are responsible for the secure of camera ID & passwords;
and we strongly recommend all users setup user’s ID & password
Read this instructions before you begin
During the installation, the software will test your PC’s firewall settings.
If prompted to allow access to the network, you should answer “Allow”
or “Yes”
1
(1) IP Camera
(2) Power adaptor
(3) Camera stand
(4) Network cable
(5) Screws
(6) Software CD
(7) Manual
Setup the camera
2
(1) Follow the instruction to assemble the stand and also onto the camera
(2) The camera can be placed on flat surface or mounted up on ceiling or wall
Set up
3
(3a) Connect the camera to power adaptor and network cable
(3b) or (3c) Connect the other end of the network cable to LAN port on internet
router or Wireless internet device
! This product requires a common subnet environment supported by Router.
Look for WAN port on your internet device; if no such port, please acquire a
Router that has a WAN port build in and then connect the camera with the
router’s LAN port.
19
4
1
(1)
(2)
(4) (5) (6 (7)
2
(1)
3
a
(2)
(3)
Shortcut
Right click on the display channel
!
ݷ DisconnectǺ
Disconnect the device.
ݷ Stretch videoǺ
Stretch video display.
ݷ Edit deviceǺ
Edit device Basic Info/Alarm Se ng and Schedule recording.
ݷ Delete this deviceǺ
Delete the selected device.
ݷ SnapshotǺ
Take picture of the selected device.
ݷ Manual recordingǺ
Start recording instantly.
E. Device Control
ݷ Selected deviceǺ
Shows the IP address/ Device ID of the selected camera
ݷ Pan/Tilt Control
For control the camera angle. (For selected model only)
ݷ Video adjustǺ
Adjust light co n/resolu on/video quality.
Light c on: Indoor/Outdoor/Night vision
Resol onǺ640*480/320*240/160*120
Video quality: From highest to lowest
3
b
5
3
c
18
History of snapshot
n Open snapshot folder or delete image
o Select image
Image history
About Sec24 Security System:
Version of your IP Cam System and User’s Manual.
D. Display Channels濣
Product Specification
System Specification
Sensor Type 1/4” Color CMOS sensor
Picture Element 640x480 pixels
Lens 3.6 mm
Viewing Angle
Video Resolution VGA/QVGA/QQVGA
Frame Rate/Sec. VGA@15FPS/ QVGA & QQVGA@ 25 FPS
Compression Format M-JPEG
Weather-proof housing IP-66
Number of IR LEDs 10
Night-viewing Range Up to 5 Meters
Internal Connection LAN
Network protocols TCP/IP, UDP, uPnP, DHCP
Camera Housing Metal Camera housing & Stand
Power Consumption IR Off: 190 mA/ IR-On: 330 mA
Dimension
(Without Stand & Cable)
Weight (Without Stand) 188 gm
IR-Cut Filter Built-in
H:53° V: 40°
84 Ø 41.5mm
Frames per
second
17
Video source via
Internet
Video recording
Video source via
local network
Snapshot
manually
Relay Mode
6
Sec24 Security System
Sec24 Security System is a PC software that allow users to view video of IP cameras on PC from
local or remote location via Internet connection, this system also provide advances
features like camera configuration, video recording to PC, alarm and E-mail alert functions.
Insert the software CD to your CD-R device, start the PC software installation
according to
"Sec24 Security System_EN"
your language by check the disc content and click the
file to open the start up page.
ݷ Status Bar
Status Bar
n
o
After launching the software setup program then follow the steps
below to complete the installation.
p
q
, under this mode,it is normal that the video
fame rate received from IPCAM are slower than in LAN or P2P Mode.
)
7
16
B. Display Se ng
4 Channel
6 Channel 16 Channel
9 Channel
Full Screen Mode:
Double le click mouse of selected channel to switch to full screen mode, double le click
again to switch back.
C. Main func
1.1. 1 Click "Next" to start the installa
1.1. 2 Click "Next"
Search ToolǺ
Use to set up IP Cam (Local network only)
Search Tool
System Se ngǺ
ݷ Reconnect IP CamǺ
Auto reconnects IP Cam when disconnected.
ݷ Alarm Se ng
Sound ects leǺ
Select your preferable sound when alarming.
ݷ Snap shot and video recording path:
Setup save folder for the recorded les and snapshots.
Overwrite videoǺ
Set up the occupy disk space.
ݷSet up the system start status:
video stretch/status bar/conrm when system close
ݷStretch Video
System
Se
ng
History
About IP
Cam
System
1.1. 3 Click "Install"
1.1. 4 Click "Finish" to complete
Sec24 Security System
installa on.
Run DB Upgrade Tool to check if your applica
prompts "Incompa
ble database version" as gure. Then close DB Upgrade Tool and restart IP
Cam System.
Tips:
Start MenuAll ProgramsIP Cam SystemDBUpgrade Tool
on is ready for an upgrade. Click Upgrade if it
15
Normal Mode
Stretch video
Right click mouse on
selected image
8
Loading...