Conrad 651818, 651821, 651823 Operation Manual
Model no.: TP-228(4A)
9V 1.5V
Battery
9V 1.5V
9.0
8.1
7.2
6.3
5.4
4.5
3.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
Battery
GOOD
WEAK
REPLACE
9V 1.5V
9.0
8.1
7.2
6.3
5.4
4.5
3.6
2.7
1.8
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
Battery
9V 1.5V
9.0
1.5
Battery
BATTERY TESTER
Tests all types of 1.5v and 9v battery
A. When testing 1.5V battery
(D; C; AA; AAA; N Type)
1) the ARM
Push up
Sliding ARMNegative
Negative
and then insert the
battery with
POSITIVE (+)
terminal on the top.
2) Slide down the ARM
firmly and read the
RESULTS.
1) Push up the ARM
and then insert the
battery with
POSITIVE (+)
terminal on the top.
2) Slide down the ARM
firmly and read the
RESULTS.
1) Hold the battery as
shown with POSITIVE
on (+) left side and
NEGATIVE(-) at right.
2) Make contact with the
test pins and read the
RESULTS.
( )
+
Positive
( )
-
B. When testing 1.5V button cell
(LR44 ; LR41 etc.)
( )
Positive
+
( )
-
Negative
C. When testing 9V battery
(6F22 type)
( )
-
Bar graph LCDisplay
HOW TO USE
BATTERY TYPE
s
s
s
RADIO TYPE
9V
6F22
BUTTON CELL
AA/ AAA/ C/ D/ N
1.5V
1.5V
TEST RESULTS INDICATION
Battery Voltage Indication
GREEN
"Good" condition
YELLOW
"Weak" condition
RED
"Replace" or
"Recharge" the
battery
Battery
9V 1.5V
9.0
8.1
7.2
6.3
5.4
4.5
3.6
2.7
1.8
GOOD
WEAK
REPLACE
BATTERY REPLACEMENT
LOW BATTERY WARNING:
When indicates on LCD,
needs to replace 1pc. (1.5V)
L R44 type battery.
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
( )
( )
Positive
+
NOTES:
1) Be sure the polarity of the battery must be inserted properly.
2) The battery test is approximate only and cannot indicate whether a battery will function in all applications.
3) The battery tester may not response under high Electrostatic Discharge environment. Manual reset by moving the
battery would be necessary.
31 228 V.00
( )
+
Test Pin
-
Loading...