Conquer CQL1656 B User Manual

CQL1656-B Bluetooth Speaker

Instruction Manual (Read before proceeding)

Power:

z Please charge your Bluetooth speaker fully before its first use.

To charge the battery:

z Using a Micro USB Charging Cable (included), insert the USB power cable into the

micro USB port located on the back of the speaker . Connect the other end of the USB
cord into a powered USB source such as a computer, laptop or USB AC adapter.

z When your Bluetooth speaker is charging, the indicator light will turn red.
z Once your Bluetooth speaker is fully charged, the red light will turn off.

Playing Music via Bluetooth

z Turn your Bluetooth speaker on by sliding the power switch located on the back of the

speaker to the middle position to activate the Bluetooth function.

z The blue indicator light will flash quickly. This indicates that the speaker is in pairing

mode and is searching for your Bluetooth device.

z Make sure the Bluetooth function on your device is turned on.
z Search the speaker named,”

PBT537”.

z Once you have selected the speaker, your device will pair without a password. (If your

device prompts for a password, enter the password”0000”.)

z Once your speaker is paired, the blue indicator light will begin to flash slowly.
z Start playing music on your device. Make sure that you keep your device within a 33

feet range of your Bluetooth speaker.

z Adjust the volume of your device to a comfortable level.
z Turn off the unit when not in use.

Light Operation

z Push the On Off button to the “On” position to turn on the unit, the light will light up

automatically.

z Play music on your mobile device, the light will dance to the music.
z Turn off the unit, the light will turn off accordingly.

Caution:

z This is not a toy. Please keep away from children.
z Please keep away from water / heat.
z Low power may cause poor connection even no working of Bluetooth.
z Do not overcharge the battery.
z Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.