Conquer CQL1574 B User Manual

CQL1574-B Bluetooth Speaker

Instruction Manual (Read before proceeding)

Power:

z Please charge your Bluetooth speaker fully before its first use.

To charge the battery:

z Using a Micro USB cable (included), insert the USB power cable into the micro USB port

located on the back of the speaker . Con nect the other end of the USB cord into a powered
USB source such as a computer, laptop or USB AC adapter.

z When your Bluetooth speaker is charging, the indicator light will turn red.
z Once your Bluetooth speaker is fully charged, the red light will turn off.

Playing Music Via Bluetooth

z Turn your Bluetooth speaker on by sliding the power switch located on the back of the

speaker to ‘ON’ position.

z The blue indicator light will flash quickly . This indi cates that the spe aker is in p airi ng mode

and is searching for your Bluetooth device.

z Make sure the Bluetooth function on your device is turned on.
z Search the speaker named,”SB-01”.
z Once you have selected the speaker, your device will pair without a password. (If your

device prompts for a password, enter the password”00 00”.

z Once your speaker is paired, the blue indicator light will begin to flash slower.
z Start playing music on your device. Make sure that you keep your device within a 33 foot

range of your Bluetooth speaker.

z Adjust the volume of your device to a comfortable level.
z Turn off the unit when not in use.

Light Operation

z When turn on the unit, the light will light up automatically.
z Press the light mode button, and you can change the light mode as you need.
z When turn off the unit, the light will turn off accordingly.

Warning:

z This is not a toy. Please keep away from children.
z Please keep away from water / heat.
z Low power may cause poor connection or may cause the Bluetooth function to not work.

FCC Statem ent

z Changes or modifications not expressly approved by the party responsi ble for complian ce

could void the user's authority to operate the equipment.

z This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential inst allation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the

z instructions, may cause harmful interference to radio communications. However , there is

no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determine d
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

z -- Reorient or relocate the receiving antenna.
z -- Increase the separation between the equipment and receiver.
z -- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

z -- Consult the dealer or an experienced radio/TV technician for help
z This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions (1)this device may not cause harmful interference, and (2) this device mu st
accept any interference received, including interference that may cause undesired
operation.