Conquer CQL1553 B User Manual

CQL1553-B Bluetooth Speaker

Instruction Manual (Read before proceeding)

Power:

z Please charge your Bluetooth speaker fully before its first use.

To charge the battery:

z Using a Micro USB cable (included), insert the USB power cable into the micro USB port

located on the back of the speaker . Con nect the other end of the USB cord into a powered
USB source such as a computer, laptop or USB AC adapter.

z When your Bluetooth speaker is charging, the indicator light will turn red.
z Once your Bluetooth speaker is fully charged, the red light will turn off.

Playing Music Via Bluetooth

z Turn your Bluetooth speaker on by sliding the power switch located on the back of the

speaker to ‘ON’ position.

z The blue indicator light will flash quickly . This indi cates that the spe aker is in p airi ng mode

and is searching for your Bluetooth device.

z Make sure the Bluetooth function on your device is turned on.
z Search the speaker named,”
z Once you have selected the speaker, your device will pair without a password. (If your

device prompts for a password, enter the password”00 00”.

z Once your speaker is paired, the blue indicator light will begin to flash slower.
z Start playing music on your device. Make sure that you keep your device within a 33 foot

range of your Bluetooth speaker.

z Adjust the volume of your device to a comfortable level.
z Turn off the unit when not in use.

Light Operation

z When turn on the unit, the light will light up automatically.
z Press the light mode button, and you can change the light mode as you need.
z Multi-light dancing modes for your choices.
z When turn off the unit, the light will turn off accordingly.

Universal Speaker Operation

z For devices that are not Bluetooth enabled, use the attached audio input ca ble.
z Insert the 3.5mm input jack into the “AUX-IN” port.
z Turn on the unit by sliding the switch on the back of the Bluetooth speaker to the ‘ON’

position and start listening to music.

Warning:

z This is not a toy. Please keep away from children.
z Please keep away from water / heat.
z Low power may cause poor connection or may cause the Bluetooth function to not work.

SPECTRA”.

FCC Statement



Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television recept ion, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation

