Conquer CQL1547 B User Manual

CQL1547-B Bluetooth Receiver

Instruction Manual (Read before proceeding)

Power:

z Works on internal rechargeable Lithium battery. Please charge your Bluetooth

receiver fully before first use.
To charge the battery :
Using a Mini USB cable (included), insert the jack into ”Charging” jack located on the
side of the unit and then plug the USB connecter into the USB port on a computer for
charging.

z A red light will indicate the charging situation. When the battery is full, the re d light will

turn off automatically.

Bluetooth Receiver Operation

z Works on speaker with 3.5MM jack. Turn on the speaker and insert the 3.5MM jack

into both the Bluetooth receiver and the speaker.

z Turn on the Bluetooth receiver by pushing the switch “ON OFF” on the side to “ON”

position. The blue and the red light will start blinking alternatively and a tone form the
speaker will be heard to indicate the Bluetooth receiver is in paring mode and
searching for your Bluetooth mobile device.

z Open the Bluetooth function on your device and search the Bluetooth receiver named

“XXXX”. After selecting this pair name, your device will pair without a password. (If
required, enter the password “0000” to finalize the paring). The red light will turn off
and the blue light will begin to flash slowly after pair is complete.

z Start playing music on your device. Keep your device within 33 feet (10 meters) of

your Bluetooth receiver.

z Adjust the volume of your device to a comfortable level.
z Turn off the unit when not in use.

Caution:

z This is not a toy. Please keep away from small children.
z Please keep away from water / heat.
z Low power may cause poor connection even no working of Bluetooth.
z Do not overcharge the battery.
z Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like