CQL1541-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
z Please charge your Bluetooth speaker fully before its
first use.
To charge the battery:
z Using a Micro USB cable (included), insert the USB
power cable into the micro USB port located on the
back of the speaker. Connect the other end of the USB
cord into a powered USB source such as a computer,
laptop or USB AC adapter.
z When your Bluetooth speaker is charging, the indicator
light will turn red.
z Once your Bluetooth speaker is fully charged, the red
light will turn off.
Playing Music Via Bluetooth
z Turn your Bluetooth speaker on by sliding the power
switch located on the back of the speaker to ‘ON’
position.
z The blue indicator light will flash quickly. This indicates
that the speaker is in pairing mode and is searching for
your Bluetooth device.
z Make sure the Bluetooth function on your device is
turned on.
z Search the speaker named “AURA”
z Once you have selected the speaker, your device will
pair without a password. If your device prompts for a
password, enter the password”0000”.
z Once your speaker is paired, the blue indicator light will
begin to flash slower.
z Start playing music on your device. Make sure that you
keep your device within a 33 foot range of your
Bluetooth speaker.
z Adjust the volume of your device to a comfortable level.
Or you can press the “VOLUME INCREASE” &
“VOLUME DECREASE” on the top of speaker to
increase or reduce the volume.
z Press the “NEXT TRACK” & “PREVIOUS TRACK”
button to skip your previous and next songs you would
like to listen.
z Play or stop the music by pressing the “PLAY/PAUSE”
button on the top of speaker
z Turn off the unit by sliding the switch on the back to
“OFF” when not in use.
Light Operation
z When turn on the unit, the light will light up
automatically.
z Press the light mode button on the back, and you can
change the light mode as you need.
z When turn off the unit, the light will turn off accordingly.
Universal Speaker Operation
z For devices that are not Bluetooth enabled, use the
attached audio input cable.
z Insert the 3.5mm input jack into the “AUX-IN” port on
the back.
z Turn on the unit by sliding the switch on the side of the
Bluetooth speaker to the ‘ON’ position and st art listening
to music.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
Manufacturer: Conquer (China) Industry Co., Ltd
Address: A-703, Building 2, Tianan Cyber Park, HuangGe North Road, LongGang District,
Shenzhen 518172, P.R. China.
Phone: 0755-22157740 Fax
Contact person: Mr Zhang
: 0755-22157700
Loading...