Conquer CQL1533 B User Manual

CQL1533-B Bluetooth Speaker

Instruction Manual (Read before proceeding)

Power:

 Works on internal rechargeable Lithium battery. Please charge your speaker fully

before first use. To charge the battery :

Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the

back of the unit and then plug the USB connecter into the USB port on a computer for

charging.

 A red light aside will indicate the charging situation. When battery is full, the red light

will turn off automatically.

Bluetooth Speaker Operation

 Turn on the main unit by pushing the switch at the back. A Blue light aside will start

blinking to indicate the speaker is in paring mode and searching for your Bluetooth

mobile device.

 Bluetooth speaker device name is “PBT3006C”, connect it via the option menu of

your mobile device, pairing mode is 0000 if any is required. The Blue light will begin to

flashing slowly after pair is complete.

 Start playing music on your device. Keep your device within 33feet (10m) of your

speaker.

 Insert 3.5MM jacks of the two satellite speakers into the aux-out ports of the main unit,

when the main unit and the satellite speakers are connected via the cable, the

satellite speakers will start to play music and the side speakers on the main speaker

will stop playing.

 Adjust the volume of your device to a comfortable level.

 Turn off the unit when not in used.

Universal Speaker Operation

 For other music devices without Bluetooth, use the attached audio input cable. Insert

the 3.5 mm jacks into the “Aux-in” jack of the man unit and into the earphone jack on

your device.

 Turn on the unit and start playing music. Insert the 3.5MM jacks into the aux-out ports

of the main unit to enjoy a beautiful surrounded music.

 Turn off the unit when not in used.

Caution:

 This is not a toy. Please keep away from children.

 Please keep away from water / heat.

 Low power may cause poor connection even no working of Bluetooth.

 Do not overcharge the battery.

FCC Statement

 Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

 This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

 -- Reorient or relocate the receiving antenna.

 -- Increase the separation between the equipment and receiver.

 -- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 -- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the



following two conditions (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation